Search the Community
Showing results for tags 'PPQ'.
Found 1 result
Unfortunately there is no review thread for this bad boy yet, and the news thread is locked. But I have some new info I need to share so I'll start up a review thread for this. I don't have any review material yet per say but I'll put my two PPQ videos here for now. And a new one coming in a few days. Anyways. What I want to address is the cracking of the upper slide flat top due to the chamber on the outer barrel. I recently bought a new Asia version slide for my PPQ to replace, and I modded the chamber by chamfering off the front edge. Significantly might I add. And I noticed the chamber was still going up onto the slide upon cycling. Well, turn out the nozzle is getting stuck on the back end of the barrel/chamber on cycling, pushing onto the barrel, preventing it from dropping down on cycling. This pushes the chamber of the barrel up into the top of the slide. So I filed down a front edge on the nozzle, and cleaned up the back end of the barrel/chamber and lubed the parts up. Does it completely fix the issue? Sadly not. The nozzle and barrel still interlock a little bit. But I think with these two mods, I hope, enough is done to mitigate, or at least reduce the risk significantly, of breaking the slide (again). Other than that. Let me add this: Difference between Asia and Euro version: Asia: Full markings, longer inner barrel, blocked full auto function. Non Umarex branded. Euro: Not fully marked, shortel inner barrel, functional full auto function. Umarex licensed/branded.