Search the Community
Showing results for tags 'glock'.
Found 9 results
-
I've dug out my old KSC and KWA Glocks but I need some parts to get them going again. I could with blowback units and nozzles, hop units and barrels, all sorts of stuff. Anybody got a load of KSC Glock bits in their spares box? Thank you, Jim
-
I've just bought a used glock 17 full metal, gas, blowback from my friend and it s my first BB gun. I wanted to see what s inside so i took of the slide and the spring, and i think i put either of them back on wrong and i pressed the trigger. When i tried to reload (without gas) it didn t go back so i tried to slide it out again and it s stuck. I can t get it to go backwards at all but it can go forwards about 2 cm.
-
Cerakote finishes to use on a Glock GEN5 replica to match RS finish?
NonEx posted a topic in General Discussion
So. With the WE Glock 19 GEN5 MOS release happening and KY Airsoft custom marking versions coming shortly I am gearing up for my ultimate custom order of one of these. I am planning to go all in and have it Cerakote finished. I am trying to figure out which Cerakote finishes to use to best try to replicate the look and "feel" of an RS Glock GEN5 factory finish. The parts I am looking at having done are: Slide + cover plate + adapter plates Barrel Extractor Guide rod Rear plate It's really difficult to decide based on Cerakotes official color chart sample "pictures" (the wave thingies) and all of the actual real world sample images of finishes are heavily dependent on lighting conditions and camera settings etc. so can't be sure what is what. Basically I am wondering if anyone can tell for "sure" from real world experience which finishes look most like an RS Glock finish. The other problem I guess is that the Glock finishes have changed over the years and generations so the definition of what I think is an RS Glock finish is also a bit diffuse I suppose 😛 Anyways. In my mind, what I am looking for is: Slide: Dark/medium black/grayish finish (semi gloss) Barrel: Offset one shade darker than the slide (normal gloss) Extractor: Offset one shade lighter than the slide (low gloss) Guide rod: Offset one shade lighter than the slide (low gloss) Rear plate: Offset one shade lighter than the slide (low gloss) I think in relative terms that is how the different components of a Glock GEN5 look in relation to each other (?). Are there levels of gloss as an option on Cerakote as well? How does that work and what are the scale/numbers for glossiness? The official 3D view on Glocks site is a little too dark/black and uniform between the slide and barrel finish for what I am imagining but you can twist this thing around to see for yourselves what they think their Glock GEN5s should look like 😛 https://us.glock.com/en/pistols/g19-gen5-mos-fs -
Hi guys! I'm looking for a good magazine for my glock (TM clone) and I was wondering if the kjw co2 magazine https://shop.jkarmy.com/kj-works-kp-17-23rds-co2-magazine.html will work?, in fact I need to replace the magazine because the two that I have, the magazine loading lips endend broken, and one has the inlet valve broke, or I just need this valve? https://www.rainbow8.com/products/nine-ball-injection-valve-for-tokyo-marui-ksc-marushin-maruzen-5mm-diameter?_pos=16&_sid=7167d6a12&_ss=r or what should I do? I'm little confused....
-
Hi guys, i have this weird issue that the outer barrel is grinding the top part of the slide. This a normal thing?, why is this happening?
-
FULL ALBUM HERE When in Hong Kong I impulsively decided to buy one of the BELL ACM Glock 17s from CRW-airsoft, just because I like the Zev slide style and, well, 600 HKD isn't very much at all. The metal quality is actually quite nice (very little wear on the gold finish after much fondling), and the frame has full Glock trademarks with stippling. It comes with a spare nozzle and a set of O-rings, which is neat I guess. Unfortunately....it has some performance issues. Namely not locking back and only getting through about 10-15 shots before sputtering. But as a display piece I was satisfied. Of course not really, I wanted something I could shoot, so the CRW staff and I decided to see what it took to make it functional (or rather why it wasn't working). So here is what has been changed: The core of the issues is the recoil spring, well springs. The mags were blamed in the past but it's actually because the gun has 2 strong springs and a spacer instead of a single quality recoil spring. So we pulled one out. Now it can get through at least 40 shots (I forgot my count...sorry ) on the crappy BELL mag. The valve in the magazine was also dremeled a little bit to release more gas. Other brand magazines, specifically WE-tech polymer mags and Tokyo Marui G17 magazines do not play nicely with the flared magwell. Their baseplates are too wide. MGC has given me a strong desire for plastic Glock magazines so the BELL plate was merely put on the WE polymer magazine. Perfect fit and a happy Vorpal. While the WE magazine did work perfectly now, gas was still lost because WE magazine nozzle rubbers are flat whereas Marui/BELL ones are curved. So mine has a Firefly one in it now. Next issue: It doesn't lock back every time. Fix: Just bent the bar. Literally just bent it down a little bit. Now it works every time. An accuracy test was performed and it...wasn't too bad to be honest. Not as impressive as my Marui but still definitely functional. I'll post the video once it is uploaded by CRW. Future plan for this is having some color added to the slide by CRW before they ship it to me. My final thoughts, if you want the look of a Zev Technologies-style Glock for cheap, it's a decent purchase. If you are willing to spend just a little bit of time (and money) then you can have a very functional sidearm too. Making the gun definitely a good buy (if you like the look, which certainly isn't for everyone). Though my Glock and mods may be introduced as standard by CRW for these BELL glocks, so if you are lazy you could just wait
-
Glock G17 Salient Arms International tier I VFC/Stark Arms
Rainer1989 posted a topic in Pistols (Gas)
I have made this video review of the Glock G17 Salient Arms International tier I VFC/Stark Arms. Is my first video review, sorry for the audio sinc of the last part, any feedback is welcome!- 15 replies
-
- 1
-
-
- Salient arms
- salient
- (and 8 more)
-
This is not an advertisement just looking for feed back on what you think of this frame. I did the cuts using some tight tolerance machines.
-
From the album: Guns
Doing some target practice, using Blue BBs for "simmunitions"-ish projectiles© Me
