VictorCharly Posted May 6, 2007 Report Share Posted May 6, 2007 I've recently bought a new KSC M11A1 with G&P metal frame pre-fitted. However when I came to the seemingly simple task of stripping the gun Ive faulted at the first hurdle....the front retaining pin. The plastic pin at the front easily removes, but the metal tube it slides out of does not want to budge, and believe me I've tried! I've researched on the net & I get the impression it should slide out with very little effort. I was wondering if this was an issue with the G&P metal frame or whether I'm not doing something right? I think I may have to resort to using the trusty nylon mallet Any feedback appreciated. VictorCharly Link to post Share on other sites
jv83 Posted May 14, 2007 Report Share Posted May 14, 2007 Hey had sorta the same problem with ksc metal upper part, hammered the retaining pin out using a pencil and hammer. Its most likely just a little tight. Link to post Share on other sites
VictorCharly Posted May 14, 2007 Author Report Share Posted May 14, 2007 Cheers for the info. I'm leading to think it just needs a little gentle persuasion, so I'm going to have another crack at it...I'll post on how I get on. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.