Stealthbomber Posted March 29, 2008 Report Share Posted March 29, 2008 Read me! Quote Link to post Share on other sites
speculator Posted March 29, 2008 Report Share Posted March 29, 2008 Wow...i remember reading that before, can't believe that escaped me :X. Also I think I know another reason too because i disassembled that part with the trigger contacts after the wire broke loose from the solder. I had to resolder it back a few times and install it after. I'll have to take another look. Thanks! Quote Link to post Share on other sites
ferdiii Posted April 5, 2008 Report Share Posted April 5, 2008 Does anybody tried to install a shorter barrel in his SA80 army? I only can say that i have done and now, my SA80 works better. First, I installed a Systema barrel and I didn´t get a good performance.Then , I cut the barrel and...it seems magic.Now , it works very well. Quote Link to post Share on other sites
Avenger Posted April 9, 2008 Report Share Posted April 9, 2008 Guys, did you now figure out which piston fits definitely in? Â My mate's Army L85's piston broke, and we have to buy a replacement one. Can somebody tell me which one I'd rather choose? Maybe with a link on UNC or WGC? Â Thank you guys! Â Btw...awsome review! Quote Link to post Share on other sites
Domz Posted April 21, 2008 Report Share Posted April 21, 2008 (edited) Search the previous posts, you either need a spacer (search l85 on redwolf) or an 18 tooth piston... Â Got my L85 fixed by AW and it now has their piston spacer. RoF has increased and performs well but the auto to semi problem still occurs sometimes, though less regularly maybe. Its still precocking. Edited April 21, 2008 by Domz Quote Link to post Share on other sites
ferdiii Posted April 21, 2008 Report Share Posted April 21, 2008 (edited) Search the previous posts, you either need a spacer (search l85 on redwolf) or an 18 tooth piston... Got my L85 fixed by AW and it now has their piston spacer. RoF has increased and performs well but the auto to semi problem still occurs sometimes, though less regularly maybe. Its still precocking. I suppose you are still using the original gear (modified) , don´t you? I told you this cos´I installed an element sector gear and them,the semi don´t works.Only fire in auto.If you modified the original sector gear,I think,the semi doesn´t works fine, but at least,sometimes, it works. I would like to ask you, if you know, if in the piston of 16 tooths that you are now using in your SA80, the second tooth has been remove to reduce the risk of premature engagement. Thanks Edited April 21, 2008 by ferdiii Quote Link to post Share on other sites
Stealthbomber Posted April 21, 2008 Report Share Posted April 21, 2008 Erm, you might want to rethink that one. Â Although "any" 16 tooth piston will fit (along with the spacer), some people have noted that the AA R85 seems to have an upper gearbox that's slightly too wide. As a result, some pistons will slip off the rails after they've been fitted. The important thing is to find a piston that's as wide as possible to minimise the chances of this happening. Â As for it not shooting in semi-auto, you need to modify the trigger block as per the thread I made on the subject a while back. Quote Link to post Share on other sites
Domz Posted April 25, 2008 Report Share Posted April 25, 2008 I don't actually know it was done by the shop, sorry. And yeah it's probably not the piston's fault the semi problem, wherever Stealthbomber's link was, find that Quote Link to post Share on other sites
Saniainen Posted April 26, 2008 Report Share Posted April 26, 2008 (edited) I found out today that all TM m14 (v.7 box) gears fits perfectly to army R85, after modifieing piston with spacer. Â Here you can see pictures where I installed TM M14 gears to R85 gearbox. Edited April 26, 2008 by Saniainen Quote Link to post Share on other sites
Domz Posted April 27, 2008 Report Share Posted April 27, 2008 Heres the link to the trigger assembly fix if you still wanted it http://www.arniesairsoft.co.uk/forums/inde...=138257&hl= Â Â Â Skirmished my ARMY R85 with the AW spacer, works v. well except 1) when not using blowback (random I know) on semi it winds on the first shot and fires twice on the second trigger pull... So I need to follow the link too I guess... 2) Randomly trigger occasionally becomes really hard to pull, switching fire mode stops it... Quote Link to post Share on other sites
SwatMP5man Posted May 4, 2008 Report Share Posted May 4, 2008 (edited) Okay, well having read through the thread several times since it started, i cant remember seeing anyone mentioning attaching a STAR UGL to this. ( I also searched using the advanced search but still turned up nothing) Now I'm looking at getting the STAR UGL some time later this month, but before diving in i just wanted to know whether anyone had managed to successfully mount the STAR UGL on the ARMY L85. Â Any info would be greatly appreciated as i could probably deal with minor modifications but wouldnt have the tools or know how to make massive modifications to get them to fit. Â Cheers Sean Edited May 4, 2008 by SwatMP5man Quote Link to post Share on other sites
rolling-thunder Posted May 4, 2008 Report Share Posted May 4, 2008 I got some new kit to go with my R85 but i'm thinking of getting the A2 kit for more recent loadouts. Quote Link to post Share on other sites
Domz Posted May 5, 2008 Report Share Posted May 5, 2008 "A2 kit"? Is there a kit to change an ARMY to the A" or do you mean get a different rifle altogether? Â Â R85 worked brilliantly at ground zero yesterday Quote Link to post Share on other sites
rolling-thunder Posted May 5, 2008 Report Share Posted May 5, 2008 I intend to buy a new cocking handle & have a mag release button protector welded on the gun.With an A2 cocking handle i'll have the choice of swoping between the A & A2 at choice. Quote Link to post Share on other sites
yusanai Posted May 6, 2008 Report Share Posted May 6, 2008 Guys, i've just finished reading all of the 69 pages on the subject of how many problems this gun has, I'm a bit down and i need to know, is there anybody besides rolling-thunder who is actually happy with it? I'm just starting playing airsoft and I really want this to by my first weapon . Quote Link to post Share on other sites
Hop2 Posted May 6, 2008 Report Share Posted May 6, 2008 The thing is, it seems a lot of the time, people tend to post only if they have a problem and are looking for a solution... There are some generous people who do the opposite, but largely, if your AEG is working fine, you probably won't be posting into this thread much. Â So what you read here is the ###### end of the stick... There are probably many many people out there using their R85's with few problems. I've spoken to a few on site and either they were relectuant to talk about any problems they were having or they were some of the "lucky" ones... Â Having said that, last year, just after the R85 was released, I bought one and it was a nightmare. Build quality was all over the place, it didn't want to work on single fire, sometimes when I held fired and took my finger off the trigger, the R85 would merrly carry on firing, hosing down people screaming Hit at me until I could point it into the air and fire BB's at the birdies. The hop was unresponsive. The mag double fed and unwound when inserted in the mag well... And other oddites. Â I was lucky. I bought it from a dealer who values customer service (Action Hobbies) and they took it back, swapping it out for something else (long story)... Â But, I am really tempted with the offer at Airsoft World... Â Â Quote Link to post Share on other sites
rolling-thunder Posted May 6, 2008 Report Share Posted May 6, 2008 But, I am really tempted with the offer at Airsoft World... Having had that gun pointed out to me i was suprised that a dealer was actually offering it.Pleasantly suprised though! It seems to be a great deal & i think that it's worth the money & theoretically they should have spotted any major problems with the gun when they cracked it open.I'd say go for it,it's a shame to loose the blow back but if you want reliability then that's the way to go. Â Quote Link to post Share on other sites
rwoodcock01 Posted May 6, 2008 Report Share Posted May 6, 2008 (edited) Thought I would chip in here, as my early release version is still going strong even with the original battery.  My HOP has been responsive. I will admit that my charging handle did fall off and that was replaced but other than that it is fine.  My Magazines fit fine with just the occasional not locking into place, but from using the real steel L85A1 I am paranoid about checking the magazine anyway. Give it the odd slap and check its still there or rest the AEG in such a way that it keeps the magazine in place.  Also I get the odd problem of not always firing an odd round on semi, I always found that this depended on how I squeezed the trigger.  I have purchased the redwolf kit for the piston/gear but have yet to fit it. I am honestly considering picking up a tightbore barrel and the G&P HOP unit not because my AEG needs it but I do like to tinker with my AEG's to know how they tick and deep down I want to improve the performance.  The Deal at Airsoft World is very good and I have always had a good service from them and so have my friends that shop there.  I have have a good experiences from this AEG, it did have its niggles and I except that as I got the early release batch of these AEG's. I would hope that if Army Armament brought out the L85A2 that I should imagine the niggles would be ironed out.  Alternatively you could wait for ICS to bring out there L85A2. At the end of the day you do take a gamble on what you buy, you will on occasion get a lemon. Its a risk we take when we get an Clone or any made AEG to be fair.  Cheers  Rich Edited May 6, 2008 by rwoodcock01 Quote Link to post Share on other sites
biguk Posted May 6, 2008 Report Share Posted May 6, 2008 Im looking at getting one from airsoft world. I notice they do a slightly altered version for £150...is this worth getting over the original version? Quote Link to post Share on other sites
Hop2 Posted May 6, 2008 Report Share Posted May 6, 2008 I'm thinking about it too, but only because I cannot be arsed to do the modifications listed here that are supposed to cure some of the problems... Â Anyone bought one of these "pre-moded" R85`s? Quote Link to post Share on other sites
Domz Posted May 7, 2008 Report Share Posted May 7, 2008 (edited) Since my fix to the new piston-thing Airsoft world has its performed flawlessly bar firing every other trigger press on semi a while back for a few hundred shots, now fixed itself, and has massacred me plenty of enemies. Looks the part, and cheap too! Â My pre-modded one stripped the piston. Since jsut that fix (they might have checked the contacts) and a new hopup packing its been good. Edited May 7, 2008 by Domz Quote Link to post Share on other sites
biguk Posted May 7, 2008 Report Share Posted May 7, 2008 COol well i'll investigate a bit more...its between this and a CAW Grenade revolver. Quote Link to post Share on other sites
crazyman Posted June 11, 2008 Report Share Posted June 11, 2008 I just picked one of these up from a buddy and I've read through the pages in this thread as well as googling info on it. How do you remove the lower gearbox from the body? I've 3 removed pins, seperated the upper from the lower and the screw at the back and it still doesn't release. Â It shoots fine, but I'd like to know how to get to it when problems arise. Quote Link to post Share on other sites
rolling-thunder Posted June 11, 2008 Report Share Posted June 11, 2008 I took my R85 out for it's second skirmish over the weekend.Great range & accurate but then i don't seem to have had any of the problems other people have had. RT Quote Link to post Share on other sites
M4_Fanatic Posted June 11, 2008 Report Share Posted June 11, 2008 Guys, i've just finished reading all of the 69 pages on the subject of how many problems this gun has, I'm a bit down and i need to know, is there anybody besides rolling-thunder who is actually happy with it? I'm just starting playing airsoft and I really want this to by my first weapon . Apart from my occasional quirks (no biggies, just the semi auto problem which I do not have the tools to fix myself) I have been very happy with it. But.. I don't skirmish with it. Still I have fired it in anger loads of times and it hasn't failed me yet. Â The only problem I have is with the battery not holding it's charge (I am getting a new one soon, along with a G&G SUSAT). Â And I know I've asked before but does anyone know where I can get a L85a2 cocking handle? Also will it fit on without the need for welding etc? I need a better answer than from some market stall at the war and peace show.... I am getting a friend from Hong Kong to buy me some parts and send them over for my guns so if I can get one from HK can I have the details please? Â TIA Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.