XaVierDK Report post Posted January 16, 2008 anyone know where to get these from in the UK or even HK ? cant seem to find them As FarEast wrote in his review, they're not in retail yet ... Nice piece of kit though, if they make a V3-version, my G36 might just need some new gears/piston/etc. Best Regards Share this post Link to post Share on other sites
infected Report post Posted January 16, 2008 um, I'm pretty sure that AirsoftGi has these, and has had them since november. linky: http://www.airsoftgi.com/index.php?cPath=3...360b8ab7450a624 Share this post Link to post Share on other sites
XaVierDK Report post Posted January 16, 2008 A quick D- in the internets for me, for not looking at dates... Best Regards Share this post Link to post Share on other sites
White_Rabbit Report post Posted January 16, 2008 hehe no problemo, seems these little buggers are hard to find Share this post Link to post Share on other sites
Beast06 Report post Posted January 16, 2008 As FarEast wrote in his review, they're not in retail yet ... Nice piece of kit though, if they make a V3-version, my G36 might just need some new gears/piston/etc. Best Regards They are in retail in the UK. Share this post Link to post Share on other sites
Hvy gear Report post Posted January 16, 2008 Link? I spoke to the guys at Modify who tell me they have no distributors within Hong Kong and none in the U.K, I've been unable to find these anywhere in the U.K and the European distributors won't sell to me in less I buy in bulk. The post I made a few days back, This was the exact same question I wanted to know a few days ago. After emailing them it turns out that they have no distributors within Hong Kong, there are a few places online based in the US that sell a range of Modify parts. Here is their European distributor list which i got through today from them, they all look like wholesale to me but it might be worth asking them if they'll sell direct to the consumer. Failing that I was told by Modify that if these places won't sell to you then you can order direct from Modify. They also have some new 'Full tune up kits' at what seem like very reasonable prices. Distributor list: 1) Italy: Tactical & Technology, website: www.tacticaltechnology.it, Email: sales@tacticaltechnology.it and their number is (+39)0331734205. 2) Belgium: Airsoft Assist, website: www.airsoftassist.eu. Email: info@airsoftassist.eu 3) Finland: PCB-Comp Oy, website: www.pcb-airsoft.com, Email: mika.mikkola@pcb-comp.com 4) Germany: StormTec, website: www.stormtec.com, Email: fthurner@stormtec.com Sniperairguns, website: www.sniperairguns.de, Email: info@sniperairguns.de There full tune up kits are around the $130 mark, at least i think it's in dollars. Note: I do not work for Modify in anyway Share this post Link to post Share on other sites
Zmarre Report post Posted January 16, 2008 I know a guy, shopowner, who has close connections with airsoftassist. If you want me to, I might look to order a set for you. Share this post Link to post Share on other sites
Utty Report post Posted January 20, 2008 Wtf... begadi.com has them, here. Scroll down to the bottom, they have the 7mm versions. Wonder if these would fit in a dboys AK box? Share this post Link to post Share on other sites
liquidflorian Report post Posted January 20, 2008 Anyone know of any US retailers that have the cylinder sets as well? Share this post Link to post Share on other sites
Hvy gear Report post Posted January 20, 2008 I know a guy, shopowner, who has close connections with airsoftassist. If you want me to, I might look to order a set for you. Thanks for the offer but Beast06 has sent me details on where to possibly get hold of Modify parts in the U.K and Modify themselves are willing to sell to me direct so i think I'm sorted. A quick note to those who can't seem to get hold of them, if you email Modify direct then they should be willing to sell you a few parts direct with payment via PayPal. Share this post Link to post Share on other sites
Utty Report post Posted January 24, 2008 I just got my 7mm high torque unit from Begadi.com, so they definitely have it. Fast & cheap international shipping too. Share this post Link to post Share on other sites
Spartan452 Report post Posted January 31, 2008 I have a CA M15 SPR, which one would i use? Would i use the 7mm one or the TM ver2? Share this post Link to post Share on other sites
Beast06 Report post Posted January 31, 2008 7mm one. Share this post Link to post Share on other sites
Gigueand Report post Posted February 7, 2008 Now the next part was probably the easiest thing I have ever done when building a modified gear box (Pun not intended!) and that was to insert all the gears. It was a simple task of dropping the gear chassis into the bushings….done! Now on a version 2 Marui gear box this was no problem along with a G&G and ICS, but on other gear boxes such as the JG, Echo1 and JLS where a lot of the time the holes made for the bushings are not aligned for standard gears, so how can you get this to fit? Modular gear set - Can anyone else confirm that these will work in an ICS V2 gearbox? Share this post Link to post Share on other sites
Spartan452 Report post Posted February 22, 2008 I just want to say that the 7mm version does NOT work with the CA gearbox. Share this post Link to post Share on other sites
Azulsky Report post Posted February 22, 2008 Can you show us piccy's to demonstrate Share this post Link to post Share on other sites
Utty Report post Posted February 22, 2008 I just want to say that the 7mm version does NOT work with the CA gearbox. Says so on the begadi store too. Share this post Link to post Share on other sites
rookie Report post Posted February 22, 2008 I just want to say that the 7mm version does NOT work with the CA gearbox. It does work with CA Ver. 3 gearbox, but not work with CA Ver.2 Gearbox. It also works with JG, echo 1 Ver.2/Ver.3 gearbox. Just do not install the 2 pieces of stainess buses for the Bevel Gear (or Spur Gear) when use on JG, echo1 gearbox. It's not effect on the performance. This is because that there are 2 kinds of bushes in the modular gear set: 1) tempered stainless bushes ---- with double grooves, Material: Stainless steel / Thermal Treatment The tempered stainless bushes are fixed to the bracket as a part of modular gear set (it is not rotated together with the gear shaft). This features its accuracy to allow the gears running more smooth. 2) stainless bushes ---- Material: Stainless steel The stainless bushes should be installed on the gearbox case to hold the gear set. There is no friction between gear set and stainless bushes when gears working. Share this post Link to post Share on other sites
Frakk2k Report post Posted February 22, 2008 Anyone tried em in a Dboys box? (Ver 2) Share this post Link to post Share on other sites
Utty Report post Posted February 23, 2008 Well it works in a dboys v3, though the metal bushings are a very, very tight fit. Hammer time. Share this post Link to post Share on other sites
rookie Report post Posted February 23, 2008 Well it works in a dboys v3, though the metal bushings are a very, very tight fit. Hammer time. You could use the Bush Keys to force the bushings into place EVENLY very easy. It's for the AEG bushings and bearings, from 6mm to 8mm. Share this post Link to post Share on other sites
Spartan452 Report post Posted February 23, 2008 Here is the CA V2 gearbox, notice the molding around the gears. Here is the modify gearset on top the of CA V2, the gear molding on the CA gearbox is blocking the gear cage. This is the V2 btw, i've never had any experience with the V3 gearbox so I don't know about that one. Share this post Link to post Share on other sites
pstj Report post Posted February 25, 2008 Anyone tried em in a Dboys box? (Ver 2) At least my Dboys ver 2 was identical to the reinforced ca mechbox, so no go (gun is M4 CQB-R deluxe). Share this post Link to post Share on other sites
rainbow5ive Report post Posted March 2, 2008 Has anyone seen the "high-speed" version yet? I have yet to see anyone have it for sale. Share this post Link to post Share on other sites
Utty Report post Posted March 2, 2008 Begadi have it Share this post Link to post Share on other sites