Jump to content

Archived

This topic is now archived and is closed to further replies.

Apex

Common Inner Barrel Length

Recommended Posts

Hope this information proves useful to my fellow softers.

 

I hope to cover AEG's Pistols and Bolt Action Rifles with the aim to cover most of the makers inc the clones

 

If you feel i have missed a model then pm and i'll add it to the list.

 

Tokyo Marui

  • 110 mm MP5K

127.5 mm Vz61 Scorpion

131 mm MAC 10

141 mm MP5 PDW

182 mm MP7

185 mm M4CQB Pistol

208 mm G3 SAS

227 mm MP5 J A4/5 SD5/6, AK47 Beta Spetsnaz

245 mm UZI (barrel is specific to UZI)

247 mm G36C, P90, CAR15, SG552

285 mm MC51 (Stock)

300 mm M733, M1A1 Thompson

303 mm VSR-10 G-SPEC

363 mm M4A1, SR16, SG551, M4 S-System

430 mm VSR-10

440 mm M14 SOCOM

433 mm Type 89

455 mm AK47, AK47s

469 mm G3 SG-1

472 mm FAMAS F1/SV

500 mm M14

509 mm M16 A1/A2/VN, AUG,

534 mm SG550

550 mm M16 A2/VN (Long Barrel), AUG (Long Barrel)

554 mm VSR-10 (Long)

590 mm PSG-1

650 mm PSG-1 (Long)

Classic Army

  • 110 mm MP5k

145 mm MP5k PDW

200 mm M15A4 SOCOM(SEAL)

220 mm CA53

229 mm MP5 A4/5 SD5/6

246.5 mm P90

247 mm G36c

280 mm M15A4 CQB (280 stock but 285 fits easily), SCAR-H (Short Barrel), SAR Offizier, AKS74U (SLR105 U)

335 mm SA58 Carbine / OSW

355 mm G36k

363 mm M15A4 Carbine (M4), CA25 URX Carbine, M249 Para

370 mm CA33 KA3

384 mm SCAR-L (Long Barrel)

429 mm CA33E

435 mm SA58 Rifle

460 mm G3 SG1

463 mm AK47 (SLR105), M14 Scout

473 mm FAMAS F1/SV

495 mm (M)G36, SAR SG

510 mm M14 Match (G&G Clone), M15A4 Rifle (M16), AUG, M249 MkII

515 mm M24

535 mm SG550

DBoys

  • 270 mm AKSU (can take up to 280mm and still be hidden inside body of the muzzle brake)

290 mm M4 CQB

330 mm 360mm MAX M4A1

419 mm SPR Mod.1 (and presumable the Mod.2)

VFC

  • 280 mm AKS74UN

267 mm HK416 D10RS (short), SCAR-H

275 mm AKS-74UN, SCAR-L (short)

285 mm CQBR Mk18 Mod 0

360 mm AK-105

363 mm SR-16 E3 ISW, HK416 D145RS (long)

380 mm SCAR-L (long)

455 mm AIMS, AIMS PMC

475 mm Mk43 Mod0/Mod1, AK-74N, AKS-74N, AK-74M

502 mm BAR M1918A2

640 mm L86 LSW (Will take 650 however around 5mm protrudes visibly into flash hider)

 

Common

 

AR-15s:

  • 285 mm 10.5" outer barrels (CQB-R).

300 mm 11.5" (M733).

363 mm 14.5" (M4A1).

407 mm 16" (civvy carbines).

509 mm 20" (M16)

590 mm 24" (Varminters)

Hurricane HK 416 Conversion Kit:
  • 285 mm Short

363 mm Medium

407 mm Long

Aug’s:
  • 363 mm Para/Commando

420 mm 9mm SMG

500 mm A3esque (Action RAS kit/JG AU-3G)

509 mm A1/A2 (Standard)

650 mm H-Bar/H-Bar-T (Boom Arms kit)

 

195 mm TOP UMP

243 mm TOP MP40

300 mm G&P M4A1 Commando

303 mm JG BAR-10 G-Spec

345 mm STAR M249 MkII

363 mm STAR M249 Para

430 mm JG BAR-10

455 mm ICS AK-74M

463 mm G&G RK-103

550 mm King Arms FN FAL

550 mm Guarder T-65K2

600 mm APS-2

639 mm Bell M700 (Tanaka Clone)

640 mm Star L86 LSW (will take 650, however around 5mm protrudes visibly into flash hider)

 

GAS SMG's:

105mm Maruzen MP5K A4 (Maruzen Vz61 Scorpion)

Pistols:

73.3 mm G26

77 mm KSC USPc

97 mm Sig P226

97 mm Glock 17

98 mm TM M92F

98.5 mm TM HiCapa 4.3

103 mm G26 Advance

106 mm M92F

105 mm TM G18c AEP (168 mm - Silencer Installed)

111 mm TM USP AEP

112.5 mm Hi Capa, M1911A1

122 mm TM M93R AEP

128 mm TM MEU, M1911A1

 

133 mm (200 mm - Silencer Installed) MK23 SOCOM 122mm 162 mm M93R Non-Blowback KCS 93mm Glock 17 Maruzen 88 mm 126m (Silencer Installed) P99 NBB 99.3 mm P99 GBB 75.5 mm P99 Compact 126 mm Maruzen M93R FS Maruzen 363mm APS2-SV (doesn’t take aeg barrels without a different hop unit) Thanks interloper.

 

 

DISCLAIMER

 

I nor Arnies will be held acountable if you buy a barrel based on the information above and it doesn't fit, it is up to you to double check what you AEG / PISTOL and so on will accept.

Share this post


Link to post
Share on other sites

Alright People, this has been updated, many TM values have been checked from their website (including the SOCOM, it is indeed 440). and all the Classic Army values have been taken from their website as well.

 

It still needs some tweeking and it will be done.

 

When you measure the barrels in your gun, make sure the barrel is actually the stock one and not an after market one. also, do not measure in inches and then convert, measure using a tape that has CM and MM values. Also, make sure you take the barrel out completely, including from the hop up unit so that you get as accurate as reading as possible so that we do not get three different measurements for the same gun like before. this is only helpful if it is done right ;)

Share this post


Link to post
Share on other sites
-JG SR-25?

 

Or any SR-25?

 

-UTG L96?

 

Or any L96?

 

L96s

 

Well (Gas), AGM (Spring) - 515mm

G&G (Gas), Ares (Gas) - 655mm

 

Basically if your mag is in the right place its 655... if its furtther forward its 515 (as far as i know, some brands may differ)

Share this post


Link to post
Share on other sites

I wanted to get a longer inner barrel for CA SA58 OSW (wich has a CA stock 335mm long inner barrel).

I got a Guarder 500mm long barrel, but i got misaligned, didnt matter whatever i did to fix it, giving me inconsistent FPS and double feeding.

Once i put back the stock barrel, it all stopped and worked fine.

I realized the the Guarder barrel is thinner than the CA barrel and it did not sit tightly. Could that the problem? If so, what would be a good precision barrel to replace a CA stock one?

 

Cheers!

Share this post


Link to post
Share on other sites

AA and presumably other makes:

509mm sa80 (l85a2 or a1)

 

thats the closest to correct anyway, could fit another few mm within the flashider.

Share this post


Link to post
Share on other sites
L96s

 

Well (Gas), AGM (Spring) - 515mm

G&G (Gas), Ares (Gas) - 655mm

 

Basically if your mag is in the right place its 655... if its furtther forward its 515 (as far as i know, some brands may differ)

 

how about well l96 spring?

is it possible to cut a barrel instead of buying a new one?

Share this post


Link to post
Share on other sites

above the uzi barrel is tagged as specific - does this mean it doesnt use standard Marui hop cuttings and therefore won't take other AEG barrels?

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.