Apex Posted October 7, 2007 Report Share Posted October 7, 2007 Hope this information proves useful to my fellow softers. I hope to cover AEG's Pistols and Bolt Action Rifles with the aim to cover most of the makers inc the clones If you feel i have missed a model then pm and i'll add it to the list. Tokyo Marui 110 mm MP5K 127.5 mm Vz61 Scorpion 131 mm MAC 10 141 mm MP5 PDW 182 mm MP7 185 mm M4CQB Pistol 208 mm G3 SAS 227 mm MP5 J A4/5 SD5/6, AK47 Beta Spetsnaz 245 mm UZI (barrel is specific to UZI) 247 mm G36C, P90, CAR15, SG552 285 mm MC51 (Stock) 300 mm M733, M1A1 Thompson 303 mm VSR-10 G-SPEC 363 mm M4A1, SR16, SG551, M4 S-System 430 mm VSR-10 440 mm M14 SOCOM 433 mm Type 89 455 mm AK47, AK47s 469 mm G3 SG-1 472 mm FAMAS F1/SV 500 mm M14 509 mm M16 A1/A2/VN, AUG, 534 mm SG550 550 mm M16 A2/VN (Long Barrel), AUG (Long Barrel) 554 mm VSR-10 (Long) 590 mm PSG-1 650 mm PSG-1 (Long) Classic Army 110 mm MP5k 145 mm MP5k PDW 200 mm M15A4 SOCOM(SEAL) 220 mm CA53 229 mm MP5 A4/5 SD5/6 246.5 mm P90 247 mm G36c 280 mm M15A4 CQB (280 stock but 285 fits easily), SCAR-H (Short Barrel), SAR Offizier, AKS74U (SLR105 U) 335 mm SA58 Carbine / OSW 355 mm G36k 363 mm M15A4 Carbine (M4), CA25 URX Carbine, M249 Para 370 mm CA33 KA3 384 mm SCAR-L (Long Barrel) 429 mm CA33E 435 mm SA58 Rifle 460 mm G3 SG1 463 mm AK47 (SLR105), M14 Scout 473 mm FAMAS F1/SV 495 mm (M)G36, SAR SG 510 mm M14 Match (G&G Clone), M15A4 Rifle (M16), AUG, M249 MkII 515 mm M24 535 mm SG550 DBoys 270 mm AKSU (can take up to 280mm and still be hidden inside body of the muzzle brake) 290 mm M4 CQB 330 mm 360mm MAX M4A1 419 mm SPR Mod.1 (and presumable the Mod.2) VFC 280 mm AKS74UN 267 mm HK416 D10RS (short), SCAR-H 275 mm AKS-74UN, SCAR-L (short) 285 mm CQBR Mk18 Mod 0 360 mm AK-105 363 mm SR-16 E3 ISW, HK416 D145RS (long) 380 mm SCAR-L (long) 455 mm AIMS, AIMS PMC 475 mm Mk43 Mod0/Mod1, AK-74N, AKS-74N, AK-74M 502 mm BAR M1918A2 640 mm L86 LSW (Will take 650 however around 5mm protrudes visibly into flash hider) Common AR-15s: 285 mm 10.5" outer barrels (CQB-R). 300 mm 11.5" (M733). 363 mm 14.5" (M4A1). 407 mm 16" (civvy carbines). 509 mm 20" (M16) 590 mm 24" (Varminters) Hurricane HK 416 Conversion Kit: 285 mm Short 363 mm Medium 407 mm Long Aug’s:363 mm Para/Commando 420 mm 9mm SMG 500 mm A3esque (Action RAS kit/JG AU-3G) 509 mm A1/A2 (Standard) 650 mm H-Bar/H-Bar-T (Boom Arms kit) 195 mm TOP UMP 243 mm TOP MP40 300 mm G&P M4A1 Commando 303 mm JG BAR-10 G-Spec 345 mm STAR M249 MkII 363 mm STAR M249 Para 430 mm JG BAR-10 455 mm ICS AK-74M 463 mm G&G RK-103 550 mm King Arms FN FAL 550 mm Guarder T-65K2 600 mm APS-2 639 mm Bell M700 (Tanaka Clone) 640 mm Star L86 LSW (will take 650, however around 5mm protrudes visibly into flash hider) GAS SMG's: 105mm Maruzen MP5K A4 (Maruzen Vz61 Scorpion) Pistols: 73.3 mm G26 77 mm KSC USPc 97 mm Sig P226 97 mm Glock 17 98 mm TM M92F 98.5 mm TM HiCapa 4.3 103 mm G26 Advance 106 mm M92F 105 mm TM G18c AEP (168 mm - Silencer Installed) 111 mm TM USP AEP 112.5 mm Hi Capa, M1911A1 122 mm TM M93R AEP 128 mm TM MEU, M1911A1 133 mm (200 mm - Silencer Installed) MK23 SOCOM 122mm 162 mm M93R Non-Blowback KCS 93mm Glock 17 Maruzen 88 mm 126m (Silencer Installed) P99 NBB 99.3 mm P99 GBB 75.5 mm P99 Compact 126 mm Maruzen M93R FS Maruzen 363mm APS2-SV (doesn’t take aeg barrels without a different hop unit) Thanks interloper. DISCLAIMER I nor Arnies will be held acountable if you buy a barrel based on the information above and it doesn't fit, it is up to you to double check what you AEG / PISTOL and so on will accept. Link to post Share on other sites
crackisbad Posted March 5, 2009 Report Share Posted March 5, 2009 Alright People, this has been updated, many TM values have been checked from their website (including the SOCOM, it is indeed 440). and all the Classic Army values have been taken from their website as well. It still needs some tweeking and it will be done. When you measure the barrels in your gun, make sure the barrel is actually the stock one and not an after market one. also, do not measure in inches and then convert, measure using a tape that has CM and MM values. Also, make sure you take the barrel out completely, including from the hop up unit so that you get as accurate as reading as possible so that we do not get three different measurements for the same gun like before. this is only helpful if it is done right Link to post Share on other sites
Hedganian Posted April 18, 2009 Report Share Posted April 18, 2009 I think I missed one off the list of AUGs - sorry. AUG Carbine - 455mm Link to post Share on other sites
Horse Posted June 15, 2009 Report Share Posted June 15, 2009 Might add the RS SVD 655mm IIRC Link to post Share on other sites
jond36 Posted August 7, 2009 Report Share Posted August 7, 2009 -JG SR-25? Or any SR-25? -UTG L96? Or any L96? Link to post Share on other sites
KinkyJedi Posted August 18, 2009 Report Share Posted August 18, 2009 -JG SR-25? Or any SR-25? -UTG L96? Or any L96? L96s Well (Gas), AGM (Spring) - 515mm G&G (Gas), Ares (Gas) - 655mm Basically if your mag is in the right place its 655... if its furtther forward its 515 (as far as i know, some brands may differ) Link to post Share on other sites
Crocodilo Posted August 18, 2009 Report Share Posted August 18, 2009 I wanted to get a longer inner barrel for CA SA58 OSW (wich has a CA stock 335mm long inner barrel). I got a Guarder 500mm long barrel, but i got misaligned, didnt matter whatever i did to fix it, giving me inconsistent FPS and double feeding. Once i put back the stock barrel, it all stopped and worked fine. I realized the the Guarder barrel is thinner than the CA barrel and it did not sit tightly. Could that the problem? If so, what would be a good precision barrel to replace a CA stock one? Cheers! Link to post Share on other sites
Hedganian Posted August 18, 2009 Report Share Posted August 18, 2009 Shim it. Link to post Share on other sites
Domz Posted August 19, 2009 Report Share Posted August 19, 2009 AA and presumably other makes: 509mm sa80 (l85a2 or a1) thats the closest to correct anyway, could fit another few mm within the flashider. Link to post Share on other sites
BIn Posted September 21, 2009 Report Share Posted September 21, 2009 L96s Well (Gas), AGM (Spring) - 515mm G&G (Gas), Ares (Gas) - 655mm Basically if your mag is in the right place its 655... if its furtther forward its 515 (as far as i know, some brands may differ) how about well l96 spring? is it possible to cut a barrel instead of buying a new one? Link to post Share on other sites
BIGBC Posted April 10, 2010 Report Share Posted April 10, 2010 ICS L86 LSW is 610mm, its listed as 550 on their site so I thats what I ordered - turns out their site is wrong Link to post Share on other sites
G0LF K4RT Posted June 8, 2010 Report Share Posted June 8, 2010 thanks this was really helpful Link to post Share on other sites
dt00th Posted October 2, 2010 Report Share Posted October 2, 2010 i tend to buy a longer barrel and cut to lenght get the maxium lenght possible for my set up Link to post Share on other sites
mugur Posted November 6, 2010 Report Share Posted November 6, 2010 You can add this to Marui: L96 AWS: 500mm And Ares DSR-1 = 590mm (normal aeg cut) Link to post Share on other sites
mugur Posted November 21, 2010 Report Share Posted November 21, 2010 VFC M4A1-ES Quake = 250mm Link to post Share on other sites
Voodoo1 Posted May 17, 2011 Report Share Posted May 17, 2011 above the uzi barrel is tagged as specific - does this mean it doesnt use standard Marui hop cuttings and therefore won't take other AEG barrels? Link to post Share on other sites
crackisbad Posted May 18, 2011 Report Share Posted May 18, 2011 Looks that way: http://neoairsoft.home.comcast.net/~neoairsoft/uzi.html Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.