Wayneard3413 Posted July 29, 2009 Report Share Posted July 29, 2009 Current belt rig setup.... Quote Link to post Share on other sites
Xander.P Posted July 29, 2009 Report Share Posted July 29, 2009 (edited) That silencer does it reach your knees? Current belt rig setup.... what make belt is that? Edited July 29, 2009 by Xander.P Quote Link to post Share on other sites
Wayneard3413 Posted July 29, 2009 Report Share Posted July 29, 2009 Just an old duty belt I had laying around inside a Blackwater sleeve with some Blue Force Gear suspenders Then some TT shingles and Eagle FB pouches Quote Link to post Share on other sites
Xander.P Posted July 29, 2009 Report Share Posted July 29, 2009 in your action photo is that magpull flick reload? Quote Link to post Share on other sites
bbondaloose Posted July 29, 2009 Report Share Posted July 29, 2009 How is there a mag in the magwell, when the used one is still flying in the air right below it? Quote Link to post Share on other sites
master_titled Posted July 29, 2009 Report Share Posted July 29, 2009 Redi-mag. Quote Link to post Share on other sites
korea115 Posted July 29, 2009 Report Share Posted July 29, 2009 I think that's the version 2 of the redi-mag, since the extra mag didn't fall out. And just realized that the silencer reached my leg, but I've seen Mk23 go just as far without the silencer......Need to get some sort of holster to attach onto my belt via MOLLE, but I don't like SERPA too much. Quote Link to post Share on other sites
Treadhead Posted July 29, 2009 Report Share Posted July 29, 2009 Mine: Very much a mix of bits and styles, but being for a fictional loadout, I can get away with it! Quote Link to post Share on other sites
-Angel- Posted July 29, 2009 Report Share Posted July 29, 2009 Broomhandle and a Kampf... that some bitchin' vintage you're rolling with right there. Quote Link to post Share on other sites
Wayneard3413 Posted July 29, 2009 Report Share Posted July 29, 2009 in your action photo is that magpull flick reload? I rotate it enough to check my chamber and then back around to get a good visual on my magwell, but I don't usually have mags flying half way down the firing line haha Here is a pic of the end of the reload... I think that's the version 2 of the redi-mag, since the extra mag didn't fall out. RediMod actually but still based of the V2's Quote Link to post Share on other sites
Treadhead Posted July 29, 2009 Report Share Posted July 29, 2009 Broomhandle and a Kampf... that some bitchin' vintage you're rolling with right there. Damn skippy... now if only the Mauser mags weren't so *suitcase*.... Quote Link to post Share on other sites
Kraut Posted August 5, 2009 Report Share Posted August 5, 2009 My combat belt kit is pretty much done. It fits very nice and comfortably. I like this set up because I can use it with different rigs. Mainly my BW PC and my Chicom chest rig, heavy and light loads respectively. One small issues is the connection points between the suspenders and the belt. The steel d-rings like to rub the suspenders and make a creaking sound whenever I move. I might try some tape to quiet them. Kit list: Blackwater IO padded MOLLE belt, Multicam ICE Tactical suspenders, Multicam Left to right; Ebaybanned replica Fastmag, tan Magpul PTS PMAG, 120 rds, black TAD Gear RDDP1, Multicam Tactical Tailor Frag pouch, Multicam High Speed Gear Inc utility pouch, Multicam ICE Tactical Vertical Detachable IFAK, Multicam w/custom med patch Blackhawk M9 SERPA holster, Foliage green Blackhawk STRIKE SERPA adapter, tan KWA M9 PTP GBB Yes, the IFAK does have some basic first-aid supplies. I'm planning on changing out the contents for something more effective later. I'm thinking of a way to mount two or three M9 mags on the belt. I'm thinking of trying the BHI CQC SERPA mag holsters. Quote Link to post Share on other sites
Mr Foxhound Posted August 5, 2009 Report Share Posted August 5, 2009 Does anyone make suspenders like the ICE ones but in Y suspender style? Those looks super nice for heavy loads. I have the average ones and was looking for something better. Quote Link to post Share on other sites
klash007 Posted August 6, 2009 Report Share Posted August 6, 2009 I suggest the eagle y suspenders for the ice belt. I bought mine from optactical for around ten bucks. Quote Link to post Share on other sites
Azulsky Posted August 6, 2009 Report Share Posted August 6, 2009 (edited) Crye selling their suspenders now, kinda expensive at $28 but hey its Crye rite... Edited August 6, 2009 by Azulsky Quote Link to post Share on other sites
talon_0315 Posted August 6, 2009 Report Share Posted August 6, 2009 Crye selling their suspenders now, kinda expensive at $28 but hey its Crye rite... Emdom USA's is about $44, while HSGI's is $28. Quote Link to post Share on other sites
Azulsky Posted August 7, 2009 Report Share Posted August 7, 2009 They seem like they should be $10 to me so hence they seem kinda expensive. They are however Y instead of H like he specified Quote Link to post Share on other sites
Shardik Posted August 22, 2009 Report Share Posted August 22, 2009 An old pic, my firstline varies somewhat now. If i use either of my 1911s ill run my 6004 or Fobus, the current setup is for my USP. WAS Blast Belt BHI 2xpistol mag pouch Maxpedition rolly polly Maxpedition M6 utility pouch 2x HSGI frag pouches TT Dropleg platform WAS Pistol holster I use this with a set of HSGI Suspenders. Quote Link to post Share on other sites
Wayneard3413 Posted August 22, 2009 Report Share Posted August 22, 2009 (edited) For now this is what I will be running 5.11 belt with insert, Bladetech AR mag pouches (not pictured are two Comptac pistol mag pouches and my Raven Concealment holster already shown in the thread) Edited August 22, 2009 by Wayneard3413 Quote Link to post Share on other sites
Murph Posted September 1, 2009 Report Share Posted September 1, 2009 Nothing special, all the cool stuff is on the chest rig. Quote Link to post Share on other sites
masakarijoe Posted September 6, 2009 Report Share Posted September 6, 2009 -Joe Quote Link to post Share on other sites
TheMerchantOfVenice Posted September 6, 2009 Report Share Posted September 6, 2009 Best M14 and setup for an M14, ever. Quote Link to post Share on other sites
Leiska Posted September 6, 2009 Report Share Posted September 6, 2009 Okay First, please anyone who answers to this. I don't want to hear the normal "OMG OMG you are doing it wrong" blaa blaa blaa nonsense, i just need an answer/opinion. Not all the criticism. The thing is when i wear two belts, one for trousers and one for the so called 'first line'. Always and i mean it always. There happens that, that the first line belt gives some much preasure to the trousers belt and it cuts deep into me, and again i'm not meaning any small little tiny scratch. There is every time need for a real trained medic/doc to patch me up. As everyone can imagine i'm tired of it and don't want it to happen again + it hurts big time. So i need the first line, but only 1. belt to serve as a trouserbelt and first line. Should i use a riggers or duty ? Also i don't have to take the belt off and mounting pouches is not an issue. This is not about dumping my gear fast as possible or trying to make an impression of SEAL, SF, etc. etc. I'm gonna carry on it my 1911, rollypolly and endoms 6o4 pouch and yes i'm going to loop it through trousers. So once more which one would do the task better ? Thanks already Leiska P.S I read the pages 4-5 of this thread, so no need of repeat. Quote Link to post Share on other sites
-Angel- Posted September 6, 2009 Report Share Posted September 6, 2009 Just wear the first line you already have, and instead of a trouser belt hook up some suspenders to the trousers. Quote Link to post Share on other sites
Wayneard3413 Posted September 6, 2009 Report Share Posted September 6, 2009 What kind of belts were you using? I have never had any issues wearing a trouser belt with a duty belt or molle belt over top of it... If yo do decide to run your pistol and mags off of your trouser belt just be sure to pick up a good quality belt (one with a rigid insert would help out quite a bit)... If you decide to run a separate belt I would suggest running a good set of suspenders to help keep the weight off of your hips Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.