Hoppum Posted February 8, 2008 Report Share Posted February 8, 2008 (edited) Thanks to ndfirespider apologising for his part in inconveniencing other members I'm re-opening this early. Edited February 8, 2008 by Hoppum Link to post Share on other sites
stewpidbear Posted February 8, 2008 Report Share Posted February 8, 2008 G&P SR25 URX, Hurricane EoTech and ACM Tac Light. Link to post Share on other sites
Eugene_Stoner Posted February 8, 2008 Report Share Posted February 8, 2008 I was thinking about getting another G&P, maybe a cqbr though, already have a m4 and an spr mod 1. that sr25 is rather nice Link to post Share on other sites
steve ashworth Posted February 8, 2008 Report Share Posted February 8, 2008 My Custom M4 with G&P short 203 Link to post Share on other sites
Grumman Posted February 8, 2008 Report Share Posted February 8, 2008 (edited) My nearly finished M16 SPR. Everything internally is done. Just needs an M3 scope, bipod and QD adapter. Apologies for the grainyness, taken with not much light. I'll post some more pics up when it's finished and I have better lighting. Component list thus far: > Based on a JG M16A3 > G&P M16A3 steel reciever set incl. metal gearbox and hop unit. > Prometheus spring > Prometheus 6.04 tightbore > Guarder cut off lever > Guarder trigger guard > Systema selector plate > Systema Area 1000 piston > D-Boys SPR front end > Samuri PRI front flip-up sight The JG cocking handle is a bit stiff and doesn't always return. Anyone know if a KA cocking handle will work any better? Edited February 9, 2008 by Grumman Link to post Share on other sites
GuzziHero Posted February 9, 2008 Report Share Posted February 9, 2008 After much soul searching. I went DMR rather than LMG with my A2: And 635'd the 177. Needs a camo job to hide the 177 trades: Link to post Share on other sites
masakarijoe Posted February 9, 2008 Report Share Posted February 9, 2008 http://i210.photobucket.com/albums/bb264/stewpidbear/mcurx.jpg G&P SR25 URX, Hurricane EoTech and ACM Tac Light. wow, looks awesome -joe Link to post Share on other sites
pfcstoner Posted February 9, 2008 Report Share Posted February 9, 2008 (edited) i have a very specific picture request. thanks in advance for helping me out. a M4 of and type(G&P, CA, TM) with -10.5" barrel -Crane stock -free float ris -normal front sight - Eotech 551 or 552 or ACOG - rear cut down buis or flip up buis or no rear sight thanks Edited February 9, 2008 by pfcstoner Link to post Share on other sites
Stl Posted February 9, 2008 Report Share Posted February 9, 2008 i have a very specific picture request. thanks in advance for helping me out. a M4 of and type(G&P, CA, TM) with -10.5" barrel -Crane stock -free float ris -normal front sight - Eotech 551 or 552 or ACOG - rear cut down buis or flip up buis or no rear sight thanks This is my old M4 CQBR G&P You just need to remove with photoshop the Aimpoint. Link to post Share on other sites
DUSTER:recon Posted February 9, 2008 Report Share Posted February 9, 2008 i love the CQB's! Link to post Share on other sites
DUSTER:recon Posted February 9, 2008 Report Share Posted February 9, 2008 i love the CQB's! Link to post Share on other sites
steve ashworth Posted February 9, 2008 Report Share Posted February 9, 2008 Just a few of my Armalite collection Link to post Share on other sites
aimpoint Posted February 9, 2008 Report Share Posted February 9, 2008 (edited) a work in progress,still needs a decent scope,bipod and im thinking maybe a stubby vert grip (sorry for the poor lighting) Edited February 9, 2008 by aimpoint Link to post Share on other sites
BentleyCntlGT Posted February 10, 2008 Report Share Posted February 10, 2008 I'm not feeling the stock thing on your gun Link to post Share on other sites
aimpoint Posted February 10, 2008 Report Share Posted February 10, 2008 (edited) yeah the cards a lil on the large side il admit,could do with being smaller Edited February 10, 2008 by aimpoint Link to post Share on other sites
BigAl Posted February 10, 2008 Report Share Posted February 10, 2008 After much soul searching. I went DMR rather than LMG with my A2: Nice old gun there mate. I'd dump the little suppressor though it's to modern for the style of the gun and the folding front sight is a bit poinles on an A2. Link to post Share on other sites
Hispeed1 Posted February 10, 2008 Report Share Posted February 10, 2008 (edited) i have a very specific picture request. thanks in advance for helping me out. a M4 of and type(G&P, CA, TM) with -10.5" barrel -Crane stock -free float ris -normal front sight - Eotech 551 or 552 or ACOG - rear cut down buis or flip up buis or no rear sight thanks STL-pretty much a CQB-R set-up right? Here's an old TM that I used to have: Edited February 10, 2008 by Hispeed1 Link to post Share on other sites
Hispeed1 Posted February 10, 2008 Report Share Posted February 10, 2008 I'm not feeling the stock thing on your gun Thanks a lot SCOOBEROO! J/K... (Please see the SEAL thread to get this inside joke) Link to post Share on other sites
youngblood Posted February 10, 2008 Report Share Posted February 10, 2008 Link to post Share on other sites
Eugene_Stoner Posted February 10, 2008 Report Share Posted February 10, 2008 Whats that flashhider on the last pic? Link to post Share on other sites
medic23 Posted February 10, 2008 Report Share Posted February 10, 2008 barrett one by G&G i believe Link to post Share on other sites
A-Ron Posted February 10, 2008 Report Share Posted February 10, 2008 Bored so I'll throw my ###### up, lol... Crane holds the battery, PEQ actually works really nicely too I may add, and it's whats inside that counts... After many hours of dremeling, checking, sanding, checking, ******************, and then checking again... I finally got the generation 2 black PGC ProWin gearbox to fit and work inside of her. hoo hoo hooooooo boy is it nice too!! lol Kinda miss my old generation 1 blue PGC ProWin though... Maybe I'll have to build another M4 series to fit it into. Little blurb about it... Currently waiting to see if the Escort boxes ever come out, if so one will be plated inside of the body. Outer barrel is a 2 part convertible outer barrel made by Echo1 USA... It can be a 10.5" or 14.5" outer barrel, all I have to do is screw on the attachment piece... I'm actually very impressed with it too for being "lower end" stuff (lower end imo). RIS is a real steel Surefire M73 RIS system that I acquired from a good friend (ho ho hoooo boy is it ever nice too). Other than that, the externals are pretty plain to see and explain to yourself... It's just light and quiet as can be, lol Sadly until that Escort box comes out, it's in need of a battery bag... Instead of the bag I took a M4 mag shingle and zip tied it to the stock with removable zip ties. I have to hit the rail covers with a little bit of tan or brown to darken them up a bit too. Link to post Share on other sites
medic23 Posted February 10, 2008 Report Share Posted February 10, 2008 my "woodland" rifle; debating on painting it with OD/Dark brown Link to post Share on other sites
youngblood Posted February 10, 2008 Report Share Posted February 10, 2008 barrett one by G&G i believe yup exactly it. I was taking these pix at night and my room is too small to get a good pic. My team likes to call my sr25 the mini barret. Link to post Share on other sites
GuzziHero Posted February 10, 2008 Report Share Posted February 10, 2008 Nice old gun there mate. I'd dump the little suppressor though it's to modern for the style of the gun and the folding front sight is a bit poinles on an A2. Cheers Yeh, I need to switch back to the 509 barrel...the suppressor is there to hide a 590 one. The PRI sight is on because I broke the original by tightening the grub screw(!), but Im going to put a normal foresight back on. Link to post Share on other sites
Recommended Posts