Vercingetorix Posted May 16, 2008 Report Share Posted May 16, 2008 I am sorry to say you did a kinda ###### poor job of it.... Link to post Share on other sites
masakarijoe Posted May 16, 2008 Report Share Posted May 16, 2008 (edited) thats not owrn in. thats leopard spotted seriously, good on you for trying... but damn, you *fruitcage*ed that away -Joe Edited May 16, 2008 by masakarijoe Link to post Share on other sites
The Crunchy Bunny Posted May 16, 2008 Report Share Posted May 16, 2008 It looks like they have somekind of skin rotting disease Link to post Share on other sites
AnotherJesus Posted May 16, 2008 Report Share Posted May 16, 2008 I like it Link to post Share on other sites
Senor Bear Posted May 16, 2008 Report Share Posted May 16, 2008 I like it, reminds me of Australian camouflage pattern. Link to post Share on other sites
Fuser Posted May 17, 2008 Report Share Posted May 17, 2008 Looks like someone was trying to light it up with a Zippo. Link to post Share on other sites
Sniperman15 Posted May 17, 2008 Report Share Posted May 17, 2008 Still waiting on my trigger guard and m150 spring. Another problem I ran into was the end piece of the SPR flashider was not wide enough to accommodate the barrel so I'm trying to figure out what to do with that. Complete Systema Gearbox Systema Magnum motor Systema tightbore G&P hop-up with systema bucking G&P bushmaster body CA SPR front CA SPR pistol grip CA full stock Guarder Steel trigger Guarder Selector switch Systema bolt catch CA rear flip sight RS Armalite SPR rail G&P mag release  Link to post Share on other sites
Souske Posted May 17, 2008 Report Share Posted May 17, 2008 i made it look a little worn in. Â Looks like leeches on the guns...which is actually original. I can't call that wear exactly, but the spots on there do have some camo effectiveness (almost) since it serves as a contrast. Link to post Share on other sites
masakarijoe Posted May 17, 2008 Report Share Posted May 17, 2008 Looks like leeches on the guns...which is actually original. I can't call that wear exactly, but the spots on there do have some camo effectiveness (almost) since it serves as a contrast. thats what i first thought -joe Link to post Share on other sites
Victory Posted May 17, 2008 Report Share Posted May 17, 2008 Constructive critisism *cough* you know who you are *cough* would be a better way of going about this... Â Your gun's main "problem" (Notice the quotation marks? Your gun's problem is all on a personal point of view...we're talking opinions...three might spot a "problem" while three others find it quite nice.) is that it has a LOT of wear in a few places...if your gun is going to go through hell and back, the whole thing will, not little blotches of it. Â If I were you, I'd go check out the Worn Weapon Picture Thread...that'll give you a good idea as to where there should/could be wear, and where there normally isn't. Â -Vic Link to post Share on other sites
Whitedingo Posted May 17, 2008 Report Share Posted May 17, 2008 Where did you get it from? And what do you mean "if you want"? Are there some from whom you get the spacer, and some whom you don't? I REALLY don't wanna have to buy two scopes, just because I baught the first one from some a**-backwards retailer. Â It comes with the scope in the package, as well as the longer mounting screws for the base. I mean you could use it "if you want", sorry for not being specific. Â I got mine from RSOV. Â Link to post Share on other sites
BoE.Solidius Posted May 17, 2008 Report Share Posted May 17, 2008 My M4A1 CQB SF custom. Still being worked on, just missing the Noveske flashider I want. Â Link to post Share on other sites
MDK_Marshal Posted May 17, 2008 Report Share Posted May 17, 2008 I get the feeling I'll never be happy with my M4... =D It always seems just a little bit off compared to all these other guns... Ah well. I suppose I'll just have to keep throwing money at it     Appologies for the low quality pics, all I've got is my phone camera... At least it's better than the camera on my old phone! =D I must say, I'm loving the Element VLTOR EMod stock. comfortable and holds a battery easily!  Internals:  Systema Turbo DBoys Gb Shell with Element 7mm bearing Element clear red piston and some random vented piston head Element Cylinder Element Spring guide & clipped M115 Spring Element High speed gear set, with the sector short-stroked by 3 teeth Element Hop Chamber & Red V-hop rubber Prometheus tightbore (363mm)  Fires a smidgen over 1J - something like 1.08. As such I've got to delve inside it again to get it within the limits for most sites. Damn me being used to 350fps at my local  And now for something a little different; my "VN Carbine". It's a mismatch of some VN handguards and a cybergun M4. It's firing about 280fps and has been modded to take standard mags, so I'd say it's vaguely skirmishable!    Again, appologies for fuzzyness and general low quality of the photos. Unfortunately, there's a lack of natural light and photography skills, so... Link to post Share on other sites
Fuser Posted May 17, 2008 Report Share Posted May 17, 2008 Render I am loving that Carbine! Does the front iron site affect your scope at all? I would leave it without an M203 but thats me. I prefer the more quick carbine look of it all. Thanks. The mount is a high mount, so it elevates the dot a bit above the sights (helps if you're using a cheek riser and for other reasons) so no, the irons don't get in the way.  I'm 95% certain I won't get an M203 after selling mine, I agree with you. But if I did, it'd be barrel-mounted. Link to post Share on other sites
BoE.Solidius Posted May 17, 2008 Report Share Posted May 17, 2008 Sounds sweet. Â I am waiting for airsoft to make a nice looking foldable stocked stand alone M203 or just a nade launcher. Then get a quick rig with like 20 Shell pouches. Â As for my M4 pictured up there I still need my Noveske, anyone have one and could tell me how great they function. Link to post Share on other sites
Fuser Posted May 17, 2008 Report Share Posted May 17, 2008 VFC is releasing a new standalone M203, according to their site. Â Link to post Share on other sites
Vercingetorix Posted May 17, 2008 Report Share Posted May 17, 2008 (edited) It says out of stock on their website.... Its the same as usual..... Edited May 17, 2008 by Vercingetorix Link to post Share on other sites
BoE.Solidius Posted May 17, 2008 Report Share Posted May 17, 2008 I know they also make an additional M4 5 point stock to go with it. I thought about it getting it ut its like 400 dollars just for a simple trigger pull weapon so I have been sorta cautious. I might end up getting it though when the price drops in the future as the material VFC uses is so realistic. Link to post Share on other sites
Vercingetorix Posted May 17, 2008 Report Share Posted May 17, 2008 (edited) Maybe *hopes* it will be cheaper.... Their Sopmod Butstock, while probably being made out of better material, and being better mag than a G&P one, is only $50 with the buffer tube.... There just might be hope out there for it to be cheaper.... Edited May 17, 2008 by Vercingetorix Link to post Share on other sites
roscoedillan Posted May 17, 2008 Report Share Posted May 17, 2008 KING ARMS TROY A3 CQB: Link to post Share on other sites
BoE.Solidius Posted May 17, 2008 Report Share Posted May 17, 2008 Rosco give me that M4 now! Effen love that grip, and the fore-arm RIS system is beautiful! Nice man! Â Is that a HurricaE Eotech? Link to post Share on other sites
masakarijoe Posted May 18, 2008 Report Share Posted May 18, 2008 i agree. simply awesome question: why do you like the front sight back on the ras rather than on the gas block? just curious -Joe Link to post Share on other sites
Fuser Posted May 18, 2008 Report Share Posted May 18, 2008 Aren't most railed gas blocks a good deal lower than the RAS system? I think it would screw up the line of sight on the irons. Link to post Share on other sites
Souske Posted May 18, 2008 Report Share Posted May 18, 2008 Aren't most railed gas blocks a good deal lower than the RAS system? I think it would screw up the line of sight on the irons. Yep, my thoughts exactly. Beautiful carbine though. Link to post Share on other sites
Recommended Posts