TheSmuggler Posted October 14, 2008 Report Share Posted October 14, 2008 TM M14 Hope you like it Love it! Any suggestions on where I can find that cheek riser? I looked on google for a few minutes but had no success; Only saw the pads. Quote Link to post Share on other sites
TheGetUpKid Posted October 14, 2008 Report Share Posted October 14, 2008 Love it! Any suggestions on where I can find that cheek riser? I looked on google for a few minutes but had no success; Only saw the pads. google Karsten cheek piece. does his own cheek pieces for m14 and rifle variants and sells them for ~$50 to $60. Solid piece, i stuck it on my TM m14 without any problems because you can drill through the gaps above where the battery chills in the stock. good luck! Quote Link to post Share on other sites
sf_cheng Posted October 14, 2008 Report Share Posted October 14, 2008 (edited) yeah thats what i did. i use a lipo battery and mosfet so that little area where the fuse is suppose to go is unused, so my friend drilled two holes around that area. Edited October 14, 2008 by sf_cheng Quote Link to post Share on other sites
TheSmuggler Posted October 14, 2008 Report Share Posted October 14, 2008 yeah thats what i did. i use a lipo battery and mosfet so that little area where the fuse is suppose to go is unused, so my friend drilled two holes around that area. ^^ You 2 guys rock, thanks! Quote Link to post Share on other sites
The Crunchy Bunny Posted October 24, 2008 Report Share Posted October 24, 2008 My simple G&G, I'm thinking it needs a wood stock, and maybe a M3 with a huge sunshade. Quote Link to post Share on other sites
pfcstoner Posted October 25, 2008 Report Share Posted October 25, 2008 (edited) searched and not found an EBR kit with a Socom barrel and socom flash hider. anyone got any pics thanks in advance Edited October 25, 2008 by pfcstoner Quote Link to post Share on other sites
Delta_Knight Posted October 26, 2008 Report Share Posted October 26, 2008 Think I'm finally happy with my MK14: Quote Link to post Share on other sites
Tyge Posted October 26, 2008 Report Share Posted October 26, 2008 My CA M14 Scout - who makes dmr stocks? And do they fit the CA M14? Quote Link to post Share on other sites
Vercingetorix Posted October 26, 2008 Report Share Posted October 26, 2008 G&P makes em... Don't knwo if they fit CAs.... Quote Link to post Share on other sites
mrbishi Posted October 27, 2008 Report Share Posted October 27, 2008 Cyma M14 upgraded hop-up chamber, bucking, spring guide, Big H, re-wired, 10.8v 3300 mAh battery. Quote Link to post Share on other sites
Gh0st.Raven Posted October 29, 2008 Report Share Posted October 29, 2008 Cyma M14 upgraded hop-up chamber, bucking, spring guide, Big H, re-wired, 10.8v 3300 mAh battery. what hopup chamber did you put in? Quote Link to post Share on other sites
Plymouth Roadrunner Posted October 29, 2008 Report Share Posted October 29, 2008 what hopup chamber did you put in? Would like to know this as well, the only hop chamber I've seen is a spare CYMA one. Did you just swap in a TM? Quote Link to post Share on other sites
Reincarnation... Posted October 29, 2008 Report Share Posted October 29, 2008 Would like to know this as well, the only hop chamber I've seen is a spare CYMA one. Did you just swap in a TM? I wouldn't be surprised with swap it out with a TM unit. Would nice to know if you can. M14 TM hopup unit can be bought from TM showcase on ebay and a few other places. Quote Link to post Share on other sites
SpoonMan Posted November 1, 2008 Report Share Posted November 1, 2008 You should be able to, I've seen both the TM and the Cyma, they are exact copies. Actually, Infected's stock Cyma m14 shot further than my TM m14. Quote Link to post Share on other sites
Titleist Posted November 2, 2008 Report Share Posted November 2, 2008 Opinion time, guys I'm updating my M14, and since it'll be used for an Army Sniper rig I'm thinking of adding a KAC RAS upper rail to it. Would that be heresy or would it look decent in your opinions? It would also let me mount my PEQ as well as push my scope up a bit further. Quote Link to post Share on other sites
masakarijoe Posted November 2, 2008 Report Share Posted November 2, 2008 with the PEQ on the top, i think it would look great. but consider stock weld, if you raise your scope, you may need a higher cheek piece. -Joe Quote Link to post Share on other sites
Titleist Posted November 2, 2008 Report Share Posted November 2, 2008 I'm thinking it'd go on the right side of the RAS. Using my square PEQ pressure pad on the side of the stock. Here's my current gun: I can either go two directions, leave it as is, i.e like so: Or go with the RAS like this: Quote Link to post Share on other sites
justin.kovacs Posted November 2, 2008 Report Share Posted November 2, 2008 (edited) I really like how simple it looks in the first photo. Much like our M21's My platoon and I used in Iraq 2005. We used the Harris Bipod and Leupold M3 Scope, with a painted synthetic stock (Glass Bedded). Reference Photo: I think it would really complete the US Army M21 Sniper look with a nicely painted and worn synthetic stock..... Edit: Honestly, I have never used/seen the AN/PEQ2 used on an M21 platform. Our night scopes were more than accommodating in low light conditions. I think it would look odd to say the least. At least WE never used them. Edit 2: This was my Platoon Sergeant: http://americansnipers.org/images/mp2.jpg Taken from: AmericanSnipers.org They were instrumental in support of our sniper needs throughout the mission, donating supplies and needed materials. We could not have been as effective without the support of these fine Americans. If you have any questions about setting up your M14 to M21 specs, feel free to PM me. Im more than willing to share my knowledge of the system with you. Edited November 2, 2008 by justin.kovacs Quote Link to post Share on other sites
Titleist Posted November 2, 2008 Report Share Posted November 2, 2008 Justin, based on the photo you posted, that's using an ARMS 21 mount, which is the same mount that I'm running already. So it seems like besides maybe changing my rings out to badger ordinance, and making a ghetto cheekpad out of a black towel and electrical tape, I'm pretty close. Quote Link to post Share on other sites
justin.kovacs Posted November 2, 2008 Report Share Posted November 2, 2008 (edited) Exactly..... Its not a far stretch for the conversion. Edit: I apologize up front for the poor photo quality, but here is one of my personal photos from my Scout/Sniper Section: Samarra, Iraq 2005 Edited November 2, 2008 by justin.kovacs Quote Link to post Share on other sites
masakarijoe Posted November 2, 2008 Report Share Posted November 2, 2008 does what you already have work? then why change it? why make a "ghetto cheek pad" when you already have one that still fits the look, and works well? why change the scope rings? i never understood that. but as far as the RAS, its up to you really. what do you like more? i think a RAS with the PEQ2 on top (if it will clear under the scope) would look great. on the side may add too much bulk but thats me -Joe p.s. titliest: i remember you looking for a real PEQ a while back, and i have a friend who is selling one. pm me if you want details Quote Link to post Share on other sites
Azulsky Posted November 2, 2008 Report Share Posted November 2, 2008 (edited) I would honestly just change the sling. If you have a nice hill to roll it down then that as well. If my memory recalls there is also the matter of the selector switch, BaBaBooey had given a link to me about that months ago, oh where is it.... Edited November 2, 2008 by Azulsky Quote Link to post Share on other sites
Titleist Posted November 2, 2008 Report Share Posted November 2, 2008 I think I'll leave off the RAS, and replace the ARMS rings with some badger ordinance rings, which are much better anyways. Also, joe, PM sent. Anyways, so I'll replace the rings and monkey a little with it. Quote Link to post Share on other sites
Azulsky Posted November 2, 2008 Report Share Posted November 2, 2008 Oh i found it, my memory scares me. http://www.sparrowhawkm14.com/id9.html Quote Link to post Share on other sites
Titleist Posted November 2, 2008 Report Share Posted November 2, 2008 (edited) Oh snap, that is PERFECT. I'm gonna order those rings and the filler kit tomorrow! I think what I may do is since I have a spare selector switch from an older parts gun, I may take that fake M21 selector, and drill out a hole equal to the cylindrical portion of the M14 switch, then JB-Weld it into place. Edited November 2, 2008 by Titleist Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.