masakarijoe Posted January 14, 2009 Report Share Posted January 14, 2009 i would really recommend a cheek riser, so you can get proper stock weld, and a killflash so there is no glare to give away your position, but damn they look good -Joe Quote Link to post Share on other sites
pexi Posted January 15, 2009 Report Share Posted January 15, 2009 (edited) i would really recommend a cheek riser, so you can get proper stock weld, and a killflash so there is no glare to give away your position, but damn they look good -Joe Cheek risers will come as soon we can find it in good price, or we might do those by ourself. My M14(left one) will soon hawe 3-9x56 skope with 90mm extender. To bad there aint too much extenders in stores for 56mm lens so it will be diy. Also i use 11.1v 2200mah Li-Po, 20c Firefox battery. Specs for mine Internals: Guarder sylinder Guarder sylinder head Guarder piston Guarder piston head guarder V.3 spring guide Guarder antireversal latch Guarder cut of lever Prometheus Double Torque (200%) gears Guarder m150 spring SRC torque motor Madbull Blackpython tightbore ver2. 650mm / 6,03mm Guarder hard hop up nub Guarder hard hop-up rubber Cyma hop-up unit Guarder tappet plate G&P 7mm ballbearing gearbox Mosfet What comes to accurasity, with those guns u can shoot Reddbull can over 40meter away. Performance is same as in toher one. And yes i was drunk when painting too;) Edited January 15, 2009 by pexi Quote Link to post Share on other sites
Carter Posted January 15, 2009 Report Share Posted January 15, 2009 How well does that SRC motor do to cut down trigger lag? Quote Link to post Share on other sites
pexi Posted January 15, 2009 Report Share Posted January 15, 2009 How well does that SRC motor do to cut down trigger lag? It needs hing voltage and curent, but with Li-Po and mosfet, lag is low as possible in AEG. Difference with our rate of semifire comes out of finger, vihtis practises more with girls;) Quote Link to post Share on other sites
Fellowz Posted January 16, 2009 Report Share Posted January 16, 2009 my m14 has been condemed to parts =[ the threads on the upper reciever are stripped and the casting that held the barrel in place has snapped so i can use the thing. anyone have any idea where to get a TM M14 upper reciver (the part with the charging handle and also clamps the barrel into place? cheers Quote Link to post Share on other sites
Delta14 Posted January 17, 2009 Report Share Posted January 17, 2009 (edited) Redwolfairsoft http://redwolfairsoft.com/redwolf/airsoft/...il?prodID=25988 oops sorry their out of stock Edited January 17, 2009 by Delta14 Quote Link to post Share on other sites
Zmarre Posted January 17, 2009 Report Share Posted January 17, 2009 CYMA M14 SOCOM. Too bad it's a little bit too heavy and long for my style of gameplay, because this thing is phenomenal. But I'm selling it to get back to a plain jane M4 (lol) Quote Link to post Share on other sites
Sasu_90 Posted January 18, 2009 Report Share Posted January 18, 2009 Hi Arnies, im a proud owner of a Cyma SOCOM M14, today just came to my mind if any SPEC OPS group actually uses/used the SOC 16. Google didn't help me at all, not even a single page says if its used by anyone. Thanks Beforehand Fox.cl Quote Link to post Share on other sites
Fellowz Posted January 18, 2009 Report Share Posted January 18, 2009 (edited) Redwolfairsoft http://redwolfairsoft.com/redwolf/airsoft/...il?prodID=25988 oops sorry their out of stock these guys any good? im fairly desperate see http://www.tokyo-model.com.hk/ecshop/goods.php?id=4163 Edited January 18, 2009 by Fellowz Quote Link to post Share on other sites
NeoVeNoM Posted January 18, 2009 Report Share Posted January 18, 2009 Bought from them on a number occasions when they still had their old site. One of the pain points is, that back then, did not always had in stock like their site said. But any HK shop has that. Also they only shipped with EMS. Don't know about it now. But the service was excellent. Quote Link to post Share on other sites
Ezek_GrayFox Posted January 18, 2009 Report Share Posted January 18, 2009 Hi Arnies, im a proud owner of a Cyma SOCOM M14, today just came to my mind if any SPEC OPS group actually uses/used the SOC 16. Google didn't help me at all, not even a single page says if its used by anyone. Thanks Beforehand Fox.cl apparently CAG, presonally i dont know but its a real pic of one anyway Quote Link to post Share on other sites
ERTrifleman Posted January 18, 2009 Report Share Posted January 18, 2009 My CYMA m14. I have had her for a month or two and I'm actually impressed. I have big plans for her in the future, but as of now she's stock.. I did the stock treatment with black acryllic paint and took a screwdriver to it to add the scratches. Clear coat it and wala I have my first good looking m14. My friend made the cheekrest out of foam and paracord. Quote Link to post Share on other sites
sdbigrod Posted January 19, 2009 Report Share Posted January 19, 2009 Marui m14. 420 fps and a km tightbore. I'm beginning to love this as much as my gspec. Quote Link to post Share on other sites
pexi Posted January 19, 2009 Report Share Posted January 19, 2009 Interiors of my gun has been listed before. Outside -dboys bipod -3-9x56 scope with 50mm extension and illuminated crosshair -silencer Quote Link to post Share on other sites
Apache137 Posted January 20, 2009 Report Share Posted January 20, 2009 errr not a fan of that paint job, maybe slap an ris on their? Quote Link to post Share on other sites
epzilonblue Posted January 23, 2009 Report Share Posted January 23, 2009 (edited) waiting for your comments -M14 JAE Kart Base -Marui Outer barrel (Original barrel is too tight for Prometheus 6.03 inner barrel) -G&P RIS Sniper Set Thank you Edited January 23, 2009 by epzilonblue Quote Link to post Share on other sites
Isamu Posted January 23, 2009 Report Share Posted January 23, 2009 (edited) Pretty cool, altough I prefer SOCOM JAE... Edited January 23, 2009 by Isamu Quote Link to post Share on other sites
Vihtis Posted January 23, 2009 Report Share Posted January 23, 2009 Nice job epsilonblue, it only misses harris style bipods tough I like myself G&P DMR stock most, but yours made me to think JAE stock for summer... Anyone has any experience that does Marui M14 fit how well to KART JAE stock ? Quote Link to post Share on other sites
epzilonblue Posted January 23, 2009 Report Share Posted January 23, 2009 Anyone has any experience that does Marui M14 fit how well to KART JAE stock ? thank you for comment. About Marui compatible, I actually have Marui M14 and already try to put into JAE stcok. result > failed But you can ask NeoVeNoM (page 54 of this topic) he put CYMA stuff(best Marui clone from China in my opinion) into JAE stock. he said "you are going to have to open the stock." http://img179.imageshack.us/img179/2496/1001078aw9.jpg ps. sorry for my english skill. Quote Link to post Share on other sites
Armyranger817 Posted January 23, 2009 Report Share Posted January 23, 2009 My favorite gun! Quote Link to post Share on other sites
average Posted January 28, 2009 Report Share Posted January 28, 2009 Quote Link to post Share on other sites
ERTrifleman Posted January 29, 2009 Report Share Posted January 29, 2009 ArmyRanger, what kind of cheek rest are you running? Quote Link to post Share on other sites
Armyranger817 Posted January 29, 2009 Report Share Posted January 29, 2009 (edited) I got it here. Apparently its Matrix, but Evike likes to put that brand on things, so I really have no idea... Edited January 29, 2009 by Armyranger817 Quote Link to post Share on other sites
mcc-dano Posted January 29, 2009 Report Share Posted January 29, 2009 Anyone know of a stock like the M25 Whitefeather that would fit a TM M14? It looks like a M700 stock with a cheek riser, but I haven't found much... Quote Link to post Share on other sites
crump3t Posted January 29, 2009 Report Share Posted January 29, 2009 Anyone know of a stock like the M25 Whitefeather that would fit a TM M14? It looks like a M700 stock with a cheek riser, but I haven't found much... It's sorta the same story as the JAE-100 stock, the angle of the motor inside the stock really prevents anyone from making a true replica of the Whitefeather stock. Really, the closest you can get is throwing a Karsten Cheek Rest on it for appearances. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.