SteevoLS Posted July 8, 2010 Report Share Posted July 8, 2010 If you knew him, you'd know this: QuikSilver does *nothing* cheap. Link to post Share on other sites
ChinToka Posted July 9, 2010 Report Share Posted July 9, 2010 Some Updates on my G36A2 LLM01 with Original Plug and side mounting for the HKV. G36 DMR Rail as seen with the "Jägerbattalion 292" Link to post Share on other sites
Hedganian Posted July 9, 2010 Report Share Posted July 9, 2010 I've got to say that I'm liking the side mounting for that light... But why is it white? I don't rate the forward position of the red-dot though. Link to post Share on other sites
ChinToka Posted July 9, 2010 Report Share Posted July 9, 2010 (edited) The parts are made through Rapid Prototyping and not painted yet. I desgined them myself along with the LLM. The forward position is something you have to adapt to, but ist not bad... Edited July 9, 2010 by ChinToka Link to post Share on other sites
Agent47 Posted July 9, 2010 Report Share Posted July 9, 2010 havent tested out the silencer on my MP7 but we shall see... Link to post Share on other sites
Pkekyo-Nor Posted July 9, 2010 Report Share Posted July 9, 2010 ChinToka: Are they based on real steel counterparts (link/images?) or just made up? Doesn't look too shabby actually Link to post Share on other sites
Rogue845 Posted July 9, 2010 Report Share Posted July 9, 2010 (edited) It's time for a little more XM8: Edited July 9, 2010 by Rogue845 Link to post Share on other sites
ChinToka Posted July 9, 2010 Report Share Posted July 9, 2010 Nice XM8, looks great! @Pkekyo-Nor Icon All based on RealSteel Parts. LLM01 through camera machting, sidemount is made only through sense of proportion. But as one can see, it's made pretty close Link to post Share on other sites
Rogue845 Posted July 9, 2010 Report Share Posted July 9, 2010 @ Chin Toka. Thanks mate. It was a bit of an experiment. I wasn't sure how the scope, flash hider & silencer would look. The flash hider & silencer work really well. The scope fitting isn't perfect, but it all just seems to work well together. Link to post Share on other sites
PlasticMag Posted July 10, 2010 Report Share Posted July 10, 2010 Holy Styrofoam Batman! The orange tip was just orange tape, I unwrapped it pretty fast. I bought this NIB from Pro--T, I only want the front end and stock from it. The rest is going away. No bolt or bolt catch on this model, but the aftermarked DBoys receiver has them. Go figure. Link to post Share on other sites
SteevoLS Posted July 10, 2010 Report Share Posted July 10, 2010 Darn, I was going to say "Holy styrofoam Batman!" myself. Link to post Share on other sites
Hedganian Posted July 10, 2010 Report Share Posted July 10, 2010 Remember, don't shoot any human or animal... Seriously, why do they put that on airsoft guns? Everyone knows that shooting people is the primary use for them. It's what they're designed and built for. Link to post Share on other sites
Pkekyo-Nor Posted July 10, 2010 Report Share Posted July 10, 2010 Seriously, why do they put that on airsoft guns? Everyone knows that shooting people is the primary use for them. It's what they're designed and built for. To stave off lawsuits as a result of retards buying and misusing their products Link to post Share on other sites
gijohn2 Posted July 10, 2010 Report Share Posted July 10, 2010 Could some one post a picture of a HK416 14.5 with a AFG and VN style mags? Cheers in advance Link to post Share on other sites
Hedganian Posted July 10, 2010 Report Share Posted July 10, 2010 To stave off lawsuits as a result of retards buying and misusing their products While that's certainly true, I'm not sure such a warning would avoid liability in such a case. The courts being run by idiotic jokers, as they appear to be... Link to post Share on other sites
Pkekyo-Nor Posted July 10, 2010 Report Share Posted July 10, 2010 While that's certainly true, I'm not sure such a warning would avoid liability in such a case. It would - that's the entire point of it. Why do you tink they write "caution! contents might be warm" on coffee cups? If a person has been shot by an airsoft gun, and the instructions provided by the manufacturer clearly states that the airsoft gun should not be used for any such activity, it's a case of end-user misuse, and said end-user would be liable. Link to post Share on other sites
Panzergraf Posted July 10, 2010 Report Share Posted July 10, 2010 @Pkekyo-Nor Icon All based on RealSteel Parts. LLM01 through camera machting, sidemount is made only through sense of proportion. But as one can see, it's made pretty close Nice work! Do you plan on making more of these and selling them? Link to post Share on other sites
HJA1512 Posted July 11, 2010 Report Share Posted July 11, 2010 Rogue845: Very nice XM8! How do you like the z-ISM? I want to buy one for mine as well. Could you take some pictures of it? Link to post Share on other sites
Hedganian Posted July 11, 2010 Report Share Posted July 11, 2010 It would - that's the entire point of it. Why do you tink they write "caution! contents might be warm" on coffee cups? If a person has been shot by an airsoft gun, and the instructions provided by the manufacturer clearly states that the airsoft gun should not be used for any such activity, it's a case of end-user misuse, and said end-user would be liable. The use of airsoft guns in the sport of airsofting is implied. If someone sold a tennis raquet with a warning that said "not for use in tennis", such would clearly be ridiculous. If harm was to result from the use of said raquet, then it is clearly unfit for the purpose intended, bringing at least partial liability back to the manufacturer. No such warning would be likely to stop spurious lawsuits being presented to the courts in this day and age... However, I don't think this is the place for such a discussion. Link to post Share on other sites
druid799 Posted July 14, 2010 Report Share Posted July 14, 2010 few pictures of how i"m running my JG 416 at the mo the PEQ in the second pic has been modded , i"ve mounted a working laser in it that works off a press button on the back just above the forward grip . Link to post Share on other sites
DarkLite Posted July 14, 2010 Report Share Posted July 14, 2010 Are you using the ACOG to keep the frontend from wobbling? I had to do that too on my old plastic JG 416. Link to post Share on other sites
druid799 Posted July 14, 2010 Report Share Posted July 14, 2010 Are you using the ACOG to keep the frontend from wobbling? I had to do that too on my old plastic JG 416. nope no wobble , but then i did chuck the pig metal retaining bolt that was fitted and swap it for a real bolt soon as i had it ! Link to post Share on other sites
halcon_del_sur Posted July 16, 2010 Report Share Posted July 16, 2010 My KA A-4 SPC lower with my modified Echo 1 416 upper, Magpulized in OD and BLK it works just fine: Saludos! Link to post Share on other sites
Abelius Posted July 17, 2010 Report Share Posted July 17, 2010 Glad to see I'm not the only one enjoying the MIAD in sleek form. Link to post Share on other sites
ChinToka Posted July 17, 2010 Report Share Posted July 17, 2010 Neat! Me likey! A Flashlight or a PEQ might do an extra trick Link to post Share on other sites
Recommended Posts