palmer234 Posted February 24, 2010 Report Share Posted February 24, 2010 My Ksc Usp Compact Link to post Share on other sites
Hedganian Posted February 24, 2010 Report Share Posted February 24, 2010 Your foresight appears to be on backwards. Link to post Share on other sites
Cosmitz Posted February 24, 2010 Report Share Posted February 24, 2010 Actually i think it's ok. >.> Link to post Share on other sites
Hedganian Posted February 24, 2010 Report Share Posted February 24, 2010 The circle should be to the rear to accept paint or glowing inserts for easier use in the dark. At least, that's how the 4 USPs I have are. Trying to put a glowing dot on the sloping side would be much harder. Link to post Share on other sites
halofanatic333 Posted February 24, 2010 Report Share Posted February 24, 2010 Your foresight appears to be on backwards. Both sights look backwards.... The front one looks cool that way, but dotting would be harder... Link to post Share on other sites
Hedganian Posted February 24, 2010 Report Share Posted February 24, 2010 Good point - I didn't notice the rear sight. Link to post Share on other sites
halofanatic333 Posted February 25, 2010 Report Share Posted February 25, 2010 Good point - I didn't notice the rear sight. It's quite unnoticable unless you look close enough, but the fact that the indentations for the dots shows gives it away Link to post Share on other sites
palmer234 Posted February 25, 2010 Report Share Posted February 25, 2010 both sights have the white dots toward the rear of the gun. with indentations on both sides. alex Link to post Share on other sites
UrPeaceKeeper Posted February 26, 2010 Report Share Posted February 26, 2010 G&G UMG... stock for now... will have: Shredder Concave Spacer Guarder SP110 Modify V3 cylinder head Thanks to BDU monkey I got this gun for a very reasonable price with 7 Hicaps... 6 DE Hicaps and 1 G&G Hicap. Already did two physical mods... one was to the Supressor and the other is I put the bolt catch from always closed to always open so every time I pull back on the charging handle it locks back automatically This gun rocks, stupid quiet, and will have good accuracy and range. Can't wait Link to post Share on other sites
Hedganian Posted February 26, 2010 Report Share Posted February 26, 2010 *Grumble* I want a QD silencer for my UMP, but can't afford one.... *grumble* Link to post Share on other sites
lambolurker Posted February 27, 2010 Report Share Posted February 27, 2010 Where did you get it done in Hawaii? I am topping it.. [g]http://i47.tinypic.com/11wcx35.jpg[/img] 2 7.4v Lipos, 16awg Silver Teflon wire, AB Mosfet, PDI piston, flash hidder, PDI cylinder, Nineball damper cylinder head, steel Secot gear, Nineball spring, PDI spring guide, Nineball bearing bushings, PDI long 6.01mm Tight bore, Firefly bucking, and the loads of mods.. finally got it done yesterday. Pics later? Edit: Oh yea, And the Battery setup is completely internal... No external half *albatross* stuff. If your gunna run lipo might aswell do it right. BALLER! Link to post Share on other sites
lambolurker Posted February 27, 2010 Report Share Posted February 27, 2010 Anyone have a UMP or MP5 with Micro-T1/H1? Link to post Share on other sites
sigma3 Posted February 28, 2010 Report Share Posted February 28, 2010 Apparently this thread is for pistols, too... so... My USP Compact... Link to post Share on other sites
halofanatic333 Posted February 28, 2010 Report Share Posted February 28, 2010 That picture alone has convinced me that I now want to buy a USPc. What brand is it? and is that slide brown(-ish)? Link to post Share on other sites
suicidalsnowman Posted February 28, 2010 Report Share Posted February 28, 2010 I believe that it is a shooters design titanium coloured slide on a KSC/KWA usp. Link to post Share on other sites
sigma3 Posted February 28, 2010 Report Share Posted February 28, 2010 I believe that it is a shooters design titanium coloured slide on a KSC/KWA usp. Ding ding ding! Give the man a prize! I've got some weird discoloration you can barely see around the tip from removing the orange, and I'm not sure why... I used acetone-free nail polish remover. I've tried applying the same remover to other parts of the slide to see if it has the same effect and it hasn't, so I'm not sure. I don't really want a polished slide but I feel like I need to fix it. Link to post Share on other sites
halofanatic333 Posted February 28, 2010 Report Share Posted February 28, 2010 It looks pretty cool though. Link to post Share on other sites
Hedganian Posted February 28, 2010 Report Share Posted February 28, 2010 It'll probably be the effect of the paint on the finish of the slide, rather than the ffect of the solvent you used to remove said paint. Link to post Share on other sites
lambolurker Posted March 2, 2010 Report Share Posted March 2, 2010 Cheers its tanio koba. No wonder the finish looks really nice. Link to post Share on other sites
H.U.N.K Posted March 2, 2010 Report Share Posted March 2, 2010 The finish on the Tanio-Koba USP is the best I've ever seen on a pistol. Its a crying shame its such a horrible performer. No wonder the finish looks really nice. Link to post Share on other sites
Rob15 Posted March 2, 2010 Report Share Posted March 2, 2010 (edited) I don't know about that, 2 of my 3 seem to work fine bar occasional bbs going in random directions, gas efficiency is decent with the stock piston heads suprisingly considering the seals are pretty loose, the one of mine with the upgrade piston head cycles very nicely though and seems to get a good amount of shots per fill. I dare say the upgraded one performs better than the KSC USPs I have on the whole bar the odd shots. Fit and finish of everying is certainly far better than my KSC USPs, as are the materials, all it needs now really is a tasty machined slide to top it off 3rd one has barely even been out of the box so god knows how that one performs though Edited March 2, 2010 by Rob15 Link to post Share on other sites
mrcheetos Posted March 2, 2010 Report Share Posted March 2, 2010 With a little bit of duct tape, anything is possible. Link to post Share on other sites
sigma3 Posted March 2, 2010 Report Share Posted March 2, 2010 It'll probably be the effect of the paint on the finish of the slide, rather than the ffect of the solvent you used to remove said paint. Any ideas on how to deal with that, other than sanding down the whole slide? It's definitely affected areas other than literally where the paint was before I rubbed it off. So it's either residue or it's something else. Link to post Share on other sites
Hedganian Posted March 2, 2010 Report Share Posted March 2, 2010 I would expect that it will be something along the lines of the final coat of laquer was applied to the slide after the orange tip. I'm afraid I've got no idea how to solve the problem... It's one of the reasons why I'm very glad we don't have to have orange tips in the UK. Link to post Share on other sites
Squab27 Posted March 2, 2010 Report Share Posted March 2, 2010 Thats a beauty Cheetos Hopefully soon I will have a 416 of my own to post up in here. I think the slide is going to get repainted black soon. Link to post Share on other sites
Recommended Posts