Destroyer 105 Posted February 5, 2008 Report Share Posted February 5, 2008 man i love tht nade launcher on AKs Link to post Share on other sites
ninja master of coffee Posted February 5, 2008 Report Share Posted February 5, 2008 (edited) No one has a an94? I've checked the old threads but I guess its too hard to make. Or people just don't like it. An94 -Nice RK02 btw. I do like the AN-94 but then I like peculior guns. It would be a complete pain to build, even for a proper company, as stated the mag goes in at a sloped angle (this is because if the complex 2-round burst mechanism), the 2 round burst feature fires at about 1800rpm, on full auto it fires 2 rounds at that high rate then drops down to about 600rpm (this would be very hard since you'd need a sudden gear change in an AEG which would also mean either having a very powerful motor you then geared down (wasteful on juice) of have a less powerful motor that had to occasionally drive the piston at a very high rate (strenuous on the motor and possibly gear box). Also the barrel recoils. You could of course just make on as a standard AEG with some normal rate burst feature but that seems a bit lame... P.S. You could of course make one as a GBB but it would still have to be almost as complex as the real thing (the burst mech uses a cam and wires if I recall correctly) and it's be a GBB rifle, which no one would buy... Edited February 5, 2008 by ninja master of coffee Link to post Share on other sites
mrblah Posted February 5, 2008 Report Share Posted February 5, 2008 Mrblah, What make is that AIMS? it looks nice mix of dm and inokatsu parts. Basically, i bought a dm steel kit, and all the DM parts that were ###### (wood handguards, pistol grip, selector switch, etc) were scavenged/replaced off a inokatsu AIM i had lying around. Link to post Share on other sites
GRIM! Posted February 5, 2008 Report Share Posted February 5, 2008 (edited) someone\'s going to get my Romy stock in their mail! lol Finally done guys! Recived it today Great finish on the wood and thx for the bonus Chicom sling and mag pouch Edited February 5, 2008 by Hoppum Link to post Share on other sites
iloveics Posted February 5, 2008 Report Share Posted February 5, 2008 Link to post Share on other sites
Kenny@Recon Posted February 5, 2008 Report Share Posted February 5, 2008 (edited) love the akms grim, I plan on getting one soon when I get my settlement. Probly gonna get the akms and akms carbine from RMW Its not so bad matey - seen a lot worse Courtesy of blink, and about 6 hours of my own work! Please don't quote pictures or double post. Debating on whether or not I want to order the Romanian folding stock and complete the build, because my battery storage goes to ###### if I do. quite nice although if i am honest i think the pistol grip lets the rest of it down.... Edited February 5, 2008 by Hoppum Link to post Share on other sites
socal_recon Posted February 6, 2008 Report Share Posted February 6, 2008 steel pbs-1 silencer Really? Sorry it looks exactly like the maglight I have sitting next to my desk my bad. Very nice gun. I can't make up my mind between an AIMS or a AK-74M. Link to post Share on other sites
The Crunchy Bunny Posted February 6, 2008 Report Share Posted February 6, 2008 ilovics, what is the make/base gun of the top AIMS? Also, I need you guys help. On my old CM028S I want to cut the barrel down so the front sight post sits flush to the gas tube. How would I accomplish this without a dremel? Link to post Share on other sites
mrblah Posted February 6, 2008 Report Share Posted February 6, 2008 Really? Sorry it looks exactly like the maglight I have sitting next to my desk my bad. Very nice gun. I can't make up my mind between an AIMS or a AK-74M. it feels like a maglight, has the weight of a maglight, so I have no problems with people saying I have a maglight for a silencer P.s. i tell people its a maglight. Link to post Share on other sites
Whitedingo Posted February 6, 2008 Report Share Posted February 6, 2008 ilovics, what is the make/base gun of the top AIMS? Also, I need you guys help. On my old CM028S I want to cut the barrel down so the front sight post sits flush to the gas tube. How would I accomplish this without a dremel? Hacksaw would do it just as well as a dremel. Link to post Share on other sites
0nslaught Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) VFC Aims real handguards on the way http://img253.imageshack.us/img253/8241/88714990001wi5.jpg ohh, nice VFC AIMS. hows the blowback feature? where did you get your real deal romy hand guards? still contemplating on where i should buy mine EDIT* actually now that i look at it again, those hand guards dont look as bad as the ones in the retailer pics. did you swap out your pistol grip with a different one? Edited February 6, 2008 by 0nslaught Link to post Share on other sites
GRIM! Posted February 6, 2008 Report Share Posted February 6, 2008 The handguards are badly shaped, i dont think there are any airsoft AIM handguards that look good, realsteel is the best and also the cheapest way. Link to post Share on other sites
Fin Posted February 6, 2008 Report Share Posted February 6, 2008 The handguards are badly shaped, i dont think there are any airsoft AIM handguards that look good, realsteel is the best and also the cheapest way. IF you can get them or a sodding US retailer to ship them too you But at least AIM parts a re a lot easier to track down the AK74 wood parts Link to post Share on other sites
Puding Posted February 6, 2008 Report Share Posted February 6, 2008 The vfc aims lower handguard is a lot large than the real deal, its designed to fit a lipo which I've always found strange as the battery space in the vfc aks well designed and more than enough for most people needs. The quality of the wood is a lot better than the 'orange' versions that have been posted on the forums up until know, a good sand down and a re stain and it would look even better, the finish of the metal is very nice as well. I like the blowback simple really its fun and it as it masks a lot of the 'sewing machine' sound that i particularly do not like from aegs, I have not taken it apart yet but it appears solid and well made with the system being attached to behind the piston and not directly to it. People will just say its a gimmick to me i say, so what, its fun it works and does add something to the firing in my eyes and something is better than nothing. Link to post Share on other sites
AKRay Posted February 6, 2008 Report Share Posted February 6, 2008 ilovics, what is the make/base gun of the top AIMS? Also, I need you guys help. On my old CM028S I want to cut the barrel down so the front sight post sits flush to the gas tube. How would I accomplish this without a dremel? A tube/pipe cutter (like this one: linky ) would do the job nicely, it'll also be smooth edged, which is a good thing if your sawing is anything like mine. Link to post Share on other sites
Revenge Seeker Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) Wow, puding, you have.... my dream gun... (for the moment). Those are the best pics of the VFC AIMs I've seen so far (other than website pics). I like how the VFC AIMs look even if some say its not too real. The whole fat forgrip thing works for me. Thanks! Is that the stock VFC foregrip with nothing done and did you change the pistol grip or did they do away with the whole fruity thing? Edited February 6, 2008 by Revenge Seeker Link to post Share on other sites
Puding Posted February 6, 2008 Report Share Posted February 6, 2008 Everything is stock apart from the pistol grip, i swaped that out for the matt black version off a dboys ak74 i had about, the stock pistol grip is still as you say 'fruity'. Link to post Share on other sites
Shroomalistic Posted February 6, 2008 Author Report Share Posted February 6, 2008 Anyone in the US want to sell there vfc "fruity " pistol grip. I actually could really use one for a project gun. Link to post Share on other sites
iloveics Posted February 6, 2008 Report Share Posted February 6, 2008 ilovics, what is the make/base gun of the top AIMS? It's a TM, with KA ak74 metal body and front set. Romanian foregrip and stock, ribbed cover and akm muzzle break. Is there a RS equivilent to the last pic, (ak74 with 7.62 mag) ? i really like the look of it. Link to post Share on other sites
GRIM! Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) Edited February 6, 2008 by GRIM! Link to post Share on other sites
PlasticMag Posted February 6, 2008 Report Share Posted February 6, 2008 An AK103 with a skeleton stock. Link to post Share on other sites
Money Bags Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) My AtoZ with sanded down, then restained furniture. Just was playing with it it the garden. EDIT: Just noticed the dog ######. Edited February 6, 2008 by Money Bags Link to post Share on other sites
Fin Posted February 6, 2008 Report Share Posted February 6, 2008 Very nice, what paint did you use? Link to post Share on other sites
iloveics Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) An AK103 with a skeleton stock. Oh cool, I wasn't sure if they had skeleton stocks, only thought they came with polymer sidefolders. EDIT: Moneybags, gorgeous SVD Edited February 6, 2008 by iloveics Link to post Share on other sites
Money Bags Posted February 6, 2008 Report Share Posted February 6, 2008 (edited) I used ronseal walnut satin stain after i sanded off the origional varnish. But to be honest, it looks a lot better in that picture than in real life cause the wood kit i got wasn't really well made so the handguards are mishapen. Also, the job i did of re-finishing it wasn't too good cause the butplate doesn't sit flush with the stock now after the sanding. I should have used gloss stain aswell, not satin. Thanks for the comments though! Edited February 6, 2008 by Money Bags Link to post Share on other sites
Recommended Posts