PianoBlack Posted February 24, 2010 Report Share Posted February 24, 2010 I got it from WGC shop, but several other online retailers had it. I might swap out the Hogue sleeve for some die-cut grip tape though. -Piano Quote Link to post Share on other sites
newhotness Posted February 24, 2010 Report Share Posted February 24, 2010 Any Classic Army Glock Owners Out There If So, If You Could Take The Time To PM Me Ur Thoughts It Would Be Much Appreciated. Looking To Get A CA G19. Quote Link to post Share on other sites
Eizen Posted February 25, 2010 Report Share Posted February 25, 2010 Will Tokyo Marui GBB G17 mag fit a KSC G19? KSC G17 mags do fit, but their mags are out of stock in RW. TM G17 mag RW Quote Link to post Share on other sites
Reincarnation... Posted February 25, 2010 Report Share Posted February 25, 2010 Will Tokyo Marui GBB G17 mag fit a KSC G19? KSC G17 mags do fit, but their mags are out of stock in RW. TM G17 mag RW No. Quote Link to post Share on other sites
Eizen Posted February 26, 2010 Report Share Posted February 26, 2010 Thanks for the reply. I guess that I will have to wait for the KSC ones then. Bleh. Quote Link to post Share on other sites
AZN KID Posted March 4, 2010 Report Share Posted March 4, 2010 (edited) Stock TM Glock 26 Edited March 4, 2010 by AZN KID Quote Link to post Share on other sites
RC-1138 Posted March 4, 2010 Report Share Posted March 4, 2010 Makes me miss my G26... Quote Link to post Share on other sites
Lone_Bullet Posted March 5, 2010 Report Share Posted March 5, 2010 Hi guys, a quick question! I've bought Meprolight Tru-Dot Tritium sights for my KSC G17 after I've red somewhere KSC is real steel sight compatible. Now it turns out my rear sight doens't really fit, it's way too loose. What black Metal slide would cure that? I was looking at a PGC one... If all turns out well, I'll post some piccies in here Quote Link to post Share on other sites
Snigel Posted March 5, 2010 Report Share Posted March 5, 2010 Finally I have something to post in here KSC 19 with G&G slide/threaded barrel (at least I think that's what it is.. The seller said it was Guarder but that doesn't sound right.. I'm right, yes?) And yes, it does have a custom made cockinghandle (The bleh-ish gun in the back is a standard plasticky 19..) Quote Link to post Share on other sites
PianoBlack Posted March 7, 2010 Report Share Posted March 7, 2010 I'm looking to install a magwell on a KSC G34 that I've purchased from a friend and was wondering if anybody here had any suggestions? There's not many KSC-specific magwells avaliable, so I was thinking about purchasing a real steel magwell. The Dawson ICE magwell seen on several G17s here looks really sharp. -Piano Quote Link to post Share on other sites
Firefly0 Posted March 7, 2010 Report Share Posted March 7, 2010 (edited) My Race Glock 34 with 50% internal fresh parts (thanks Crimson!) with a few new upgrades. My pics aren't great but here they are: Parts list: Prime Shuey Custom Glock 34 Slide Freedom Art Sights FF Recoil Guide Rod w/ Bearings FF Floating Valve Shooters Design Recoil Spring (150%) Shooters Design Hammer Spring (150%) Shooters Design Valve Knocker PDI Piston FF 6.03mm Hicapa barrel lenght FF soft hop up bucking Dawson Ice Magwell RSP custom frame Lighted triger pull (tuned hammer and sear) Removed initial "dead" trigger pull Custom Short Stroke (slide only cycle to cock the hammer and load the bb) Polished slide catch And i have more parts if i wish to change something. Edited March 7, 2010 by Firefly0 Quote Link to post Share on other sites
Almighty Toast Posted March 7, 2010 Report Share Posted March 7, 2010 You owe me a new pair of pants, a new floor, and the hole in the wall infront of me needs to be fixed. Quote Link to post Share on other sites
SamJacksonFan Posted March 7, 2010 Report Share Posted March 7, 2010 Quote Link to post Share on other sites
Cosmitz Posted March 10, 2010 Report Share Posted March 10, 2010 Quote Link to post Share on other sites
Cosmitz Posted March 10, 2010 Report Share Posted March 10, 2010 Quote Link to post Share on other sites
Cosmitz Posted March 10, 2010 Report Share Posted March 10, 2010 (edited) And what's under them.. since i had room. Edited March 10, 2010 by Cosmitz Quote Link to post Share on other sites
halofanatic333 Posted March 10, 2010 Report Share Posted March 10, 2010 Those glocks are pure secks Quote Link to post Share on other sites
Flolito Posted March 10, 2010 Report Share Posted March 10, 2010 KSC G18 Quote Link to post Share on other sites
Eizen Posted March 11, 2010 Report Share Posted March 11, 2010 KSC G19 - PGC Aluminum slide and outer barrel in black - Action steel recoil spring guide - Action hammer spring - Action high output valve in magazine Quote Link to post Share on other sites
PianoBlack Posted March 11, 2010 Report Share Posted March 11, 2010 Eizen- How would you describe the quality of the Action parts that you used? Their non-captured recoil spring is interesting, but having next to no experience with that brand, I am hesitant in purchasing it. -Piano Quote Link to post Share on other sites
Eizen Posted March 12, 2010 Report Share Posted March 12, 2010 I think that I am not the right person to answer your question as I have really zero experience with GBB parts. I just got the parts yesterday and shot 2 mags with them - worked really well and recoil was nice. I really learned alot while I was building this G19. But as I said I had no experience with replacement parts until yesterday. I just picked up the Action parts because they were available and looked good. I will let you know if something breaks but I don't think that will happen as they feel very good. What I learned? Never replace the hammer spring again. Pain. Quote Link to post Share on other sites
bbondaloose Posted March 13, 2010 Report Share Posted March 13, 2010 I recently got an Army R17 in a trade essentially for free, and from what I can see currently, it looks good enough to skirmish with. Other then the lower frame being ridiculously shiny and plasticy, there's a problem with the Mag Catch. As soon as I rack the slide, and let the slide go forward, the mag falls out. I looked into it, the mag catch seems slightly worn down, but not enough to just let the mag slide out. I'm guessing it's something with the spring that pushes the mag catch back into place, since I have to continuesly press the mag catch back into place from the right side of the gun. Would just getting a new metal mag catch fix the problem, or is there a problem other then the piece itself? Thanks. Quote Link to post Share on other sites
Smith5 Posted March 13, 2010 Report Share Posted March 13, 2010 If the spring that is used to keep the mag catch in place is damaged/missing/non-operational then it won't matter what mag catch you install, it still wont work correctly. You need to check that the mag catch is being returned to where it needs to be to hold the mag in place properly by the spring first. If this is not the cause of the fault then a metal mag catch may work. It cartainly shouldn't cause any problems due to it being worn down over time! Quote Link to post Share on other sites
bbondaloose Posted March 13, 2010 Report Share Posted March 13, 2010 I took a closer look, and it does seem like the spring itself is the problem. Now, how could I go about fixing it? I can't find a magazine catch spring anywhere, and I can't seem to even get in to maybe make it more resistant Quote Link to post Share on other sites
average Posted March 17, 2010 Report Share Posted March 17, 2010 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.