antroa1985 Posted June 2, 2015 Report Share Posted June 2, 2015 My custom Stark Arms G19 1 Quote Link to post Share on other sites
tinkle60 Posted June 5, 2015 Report Share Posted June 5, 2015 Who makes the magwell? I've been looking for something like that for ages. Quote Link to post Share on other sites
antroa1985 Posted June 5, 2015 Report Share Posted June 5, 2015 This is an AIP magwell for TM glock 17. The screw hole for the base that is inserted into the channel on the frame is just a little off. Simply filing the hole on the magwell to make it a little longer will do the trick. It will line up with the hole on the base. Quote Link to post Share on other sites
tinkle60 Posted June 6, 2015 Report Share Posted June 6, 2015 Ah thanks. I was getting a bit tired of waiting for sentinel designs. Quote Link to post Share on other sites
danieliglio Posted June 7, 2015 Report Share Posted June 7, 2015 where i can find those magazine bases? Quote Link to post Share on other sites
antroa1985 Posted June 7, 2015 Report Share Posted June 7, 2015 The magazine base is from a TM mag. They have a magazine called Glock 17 Custom, comes with this type of base. Quote Link to post Share on other sites
NonEx Posted June 7, 2015 Report Share Posted June 7, 2015 Strange. When I tested TM spec'd plates on my Stark magazines they were an incredibly tight fit. Stark Arms magazines take RS base plates better. Quote Link to post Share on other sites
danieliglio Posted June 8, 2015 Report Share Posted June 8, 2015 i´ve tried the base of stark arms co2 magazines and it fits but a little bit loose. Quote Link to post Share on other sites
danieliglio Posted June 8, 2015 Report Share Posted June 8, 2015 in the meantime, just to be sure... can i use co2 magazines with no modification into a vfc glock19 with no mods?. Quote Link to post Share on other sites
pforcerecon Posted June 8, 2015 Report Share Posted June 8, 2015 I have a TM G26 on its way...and once it gets here I'll definitely make sure to post up pics as I'm sure some of you might be envious. I am curious though if anyone can help me out by linking or PM me with a web site that would still have parts in stock so I can get some spare parts for this thing. I'm getting it second hand and this one hasn't been shot in quite some time, and I'm also curious what other parts it might be compatible with and if any RS would be compatible, ie: slide stop, mag release, etc. Any help would be greatly appreciated guys. Quote Link to post Share on other sites
aznriptide859 Posted June 8, 2015 Report Share Posted June 8, 2015 I have a TM G26 on its way...and once it gets here I'll definitely make sure to post up pics as I'm sure some of you might be envious. I am curious though if anyone can help me out by linking or PM me with a web site that would still have parts in stock so I can get some spare parts for this thing. I'm getting it second hand and this one hasn't been shot in quite some time, and I'm also curious what other parts it might be compatible with and if any RS would be compatible, ie: slide stop, mag release, etc. Any help would be greatly appreciated guys. Check WGC and eHobby - when buying stuff for my KJW G26, they seem to had the most parts. RWA also has mags for both; the G26 really doesn't have that many upgrade options though. Not a lot of it is RS compatible though. Quote Link to post Share on other sites
pforcerecon Posted June 9, 2015 Report Share Posted June 9, 2015 (edited) Check WGC and eHobby - when buying stuff for my KJW G26, they seem to had the most parts. RWA also has mags for both; the G26 really doesn't have that many upgrade options though. Not a lot of it is RS compatible though. Thanks man! Turns out now as the glock just arrived today..it is a KJ glock. Fully Glocked trade lower, glock 27 metal slide with KJ0168 on the right side, and the barrel says KJ and has the lovely Glock trade on it, although its beginning to wear down, and the threaded barrel has the same. So question here, WGC and Ehobby would be best best to get any spare internals as well as externals for this thing correct? And since TM is compatible with KJ, I'm assuming its the same way flipped around?? KJ compatible with TM? I'll upload pics later on...it'll be crappy cell phone pics but will do my best. So far test shooting for something that the buyer said is plus 10yrs old it seems well in order and shoots good. Has a nice heavy feel to it Main thing I want to do with this thing is metal slide, extra lower, and then spare internals in case something goes wrong. I'm just wondering too if the TM slide and barrel sets would work. *OH!....also I noticed recently that Ehobby and RWA appeared to have gotten rid of almost anything glock related on their site! Especially the GBB's themselves...with the exception of a few parts that state out of stock. Edited June 9, 2015 by pforcerecon Quote Link to post Share on other sites
NonEx Posted June 21, 2015 Report Share Posted June 21, 2015 My HK3P/WE Glock 19 GEN3 with A1A SAI RMR slide kit and custom stippling job etc. Turned out OK, no? 3 Quote Link to post Share on other sites
wolfgeorge Posted June 21, 2015 Report Share Posted June 21, 2015 I prefer the gold barrel man! Wolf Quote Link to post Share on other sites
whiteknight Posted June 21, 2015 Report Share Posted June 21, 2015 very nice nonex Quote Link to post Share on other sites
NonEx Posted June 21, 2015 Report Share Posted June 21, 2015 Of course you would George, all your guns are gold Thanks! I am considering getting another frame and having another go at it though. Not entirely pleased with it.. But it was my first full frame stippling job so I guess it's not that bad 1 Quote Link to post Share on other sites
Alias1983 Posted June 22, 2015 Report Share Posted June 22, 2015 I will have a proper slide soon Quote Link to post Share on other sites
wolfgeorge Posted June 22, 2015 Report Share Posted June 22, 2015 NonEx... You're exaggerating.... I have a few gold guns... Not all! I'm saying just the gold barrel really catches the eye... Wolf 1 Quote Link to post Share on other sites
pforcerecon Posted June 23, 2015 Report Share Posted June 23, 2015 Nothing too special. Although not pictured but this did come with a threaded barrel and 2 suppressors when I got it. Stock kjw glock 27 with full glock trades Sorry for the cruddy cell phone pics. Sadly though now this will have to go up for sale, but it's a beautiful lil backup gun. Quote Link to post Share on other sites
QDRenegade Posted June 23, 2015 Report Share Posted June 23, 2015 (edited) Moar Tupperware! Airsoft up close. 9mm further away. Edited June 23, 2015 by QDRenegade 1 Quote Link to post Share on other sites
pforcerecon Posted June 23, 2015 Report Share Posted June 23, 2015 Very nice QDRenegade!! 1 Quote Link to post Share on other sites
Got Wood? Posted June 23, 2015 Report Share Posted June 23, 2015 2 Quote Link to post Share on other sites
pforcerecon Posted June 23, 2015 Report Share Posted June 23, 2015 Got wood? For what make an model? Quote Link to post Share on other sites
Got Wood? Posted June 23, 2015 Report Share Posted June 23, 2015 KJW G23. It's a direct copy of the FBI's engraved Glock 23 in .40 S&W Quote Link to post Share on other sites
icolater Posted June 23, 2015 Report Share Posted June 23, 2015 So engraving a kwa mark 1 ptp 1911 with kimber tle trades would be possible, always wondered why people never used them before. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.