Dj_komodo Posted November 25, 2015 Report Share Posted November 25, 2015 Every part was a drop in fit to my surprise No filing or nothing. Only problem that i can see right now is that its hard to empty the magazine of BB's on one filling, thats because of the weight of the steel slide i guess. I will try to buy a co2 magazine from stark arms later on to see if it takes care of the problem. Another small issue was the fitting of the serial tag, but i did the best i could do and the weapon light covers it so its not a big issue:) 1 Quote Link to post Share on other sites
NonEx Posted November 25, 2015 Report Share Posted November 25, 2015 (edited) Is there even a base gun in there or build entirely from scratch with parts? Pretty amazing. Yeeh. Can imagine gas usage is a bit of an issue with the steel slide and harder springs etc. Solution, use Guarder 220 PSI gas. With all that steel it should be able to handle it BTW why the KJW spec. mags and not TM ones? Is the gun build not TM spec? May I ask a rough estimate of total cost for the build? Or maybe you don't even want to know that yourself Dangit, now you made me want to build something like that myself Come to think of it I probably already have about half of the parts required to do this... Edited November 25, 2015 by NonEx 1 Quote Link to post Share on other sites
DeltaZero Posted November 25, 2015 Report Share Posted November 25, 2015 Where'd you get that XC1 too pal? Been after one for ages! Lovely build! 1 Quote Link to post Share on other sites
NonEx Posted November 25, 2015 Report Share Posted November 25, 2015 Boink: http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=32_92&products_id=21308 Quote Link to post Share on other sites
Dj_komodo Posted November 25, 2015 Report Share Posted November 25, 2015 I used a kjw g23 as a base gun, it kinda sucked as I only needed the base gun for one little part that guarder doesn't make, the hop up housing and the hop up adjustment arm/lever. So 50 bucks for that part :/ I contacted guarder regarding that part and they would look in to that, and thanked me for the suggestion:) Yeah and therefore the kjw spec magazines, they fit fine on a we g19 and stark arms g19. Thanks for the tip on the guarder gas:) The total cost is around 450-500 I think, I didn't have the guts to figure it out, I can do it when I get home. I bought the light from aliexpress for 43 bucks, I see now that boomarms has it as well if you want it a lot faster: http://boomarms.com/shop/item.cfm?id=ACM-FL-XC1-BK&curr_code=USD Ebairsoft has one if you don't want the surefire markings... 1 Quote Link to post Share on other sites
wolfgeorge Posted November 25, 2015 Report Share Posted November 25, 2015 That's beautiful!! Great photos too!! Wolf 1 Quote Link to post Share on other sites
Dj_komodo Posted November 25, 2015 Report Share Posted November 25, 2015 May I ask a rough estimate of total cost for the build? Or maybe you don't even want to know that yourself Damn, just did the final calculations and it landed at 700 usd sharp in total what have I done!? Quote Link to post Share on other sites
BioRage Posted November 25, 2015 Report Share Posted November 25, 2015 Damn, just did the final calculations and it landed at 700 usd sharp in total what have I done!? ... * current Canada rate Quote Link to post Share on other sites
Alias1983 Posted November 25, 2015 Report Share Posted November 25, 2015 -Guarder G19 Stainless CNC steel Slide -Guarder Original G19 Frame -Guarder CNC Steel Outer Barrel -Guarder Stainless Edition Inner Barrel 6.02 -Guarder G19 Enhanced Recoil Spring Guide -Guarder 150% Recoil Spring for steel slide -Guarder Steel Rail Mount for G19 -2015 New Ver. -Guarder Series No. Tag for G19 -Guarder Sainless Slide Lock -Guarder Enhanced Spring Set -Guarder Hammer Spring -Guarder Light Weight Nozzle Housing For GLOCK -Guarder Enhanced Loading Muzzle Set -Guarder Reinforced Nozzle Valve Set -Guarder Enhanced Piston Lid -Guarder Steel Rear Chassis -Guarder Extended Slide Stop (Stainless silver) -Guarder Custom G19/23 Magazine (KJ System) -Guarder Glock Magazine Base (Extended) -Guarder Steel Trigger Lever -Guarder Steel Hammer -Guarder Steel Valve Knocker -Guarder Steel Knocker Lock -Guarder Steel Hammer Sear -Guarder Beaver Tail Grip -A-PLUS HOP-UP Rubber -Maple Leaf Hop Up Adjustment Wheel -Guns Modify Aluminium trigger (Silver/black) -Crusader Steel Extended Magazine Release -UAC Fiber Optic Sight -Surefire XC1 Weapon light (ACM) Swap to an oem recoil and hammer spring, see how it works after that. Quote Link to post Share on other sites
Geri Posted November 29, 2015 Report Share Posted November 29, 2015 (edited) Storm gen 4 Edited November 29, 2015 by Geri Quote Link to post Share on other sites
Safeword Posted December 4, 2015 Report Share Posted December 4, 2015 Quote Link to post Share on other sites
DesertFoxRomel Posted December 7, 2015 Report Share Posted December 7, 2015 So I got my vintage KWA M18C to work reliably . Pics coming soon. My question to you folks is will real steel Glock magazine baseplates work on KWA mags? I see one fellow put them on a TM mag, I am wondering if I can put the Vickers Tactical mag base plates on my mags. Quote Link to post Share on other sites
Alias1983 Posted December 7, 2015 Report Share Posted December 7, 2015 (edited) So I have not got my timberwolf to work yet. Debating on just getting a new lower if I can find complete lowers. Will an hk3p g17 upper work on a tm lower? Will I have to use any tm parts in the upper? So far the new hopup unit I got has screws glued in so the screw heads are stripped out. 91mm rat tbb, I key modify tan(not liking the fitment) Dyna piston head guarder threaded outer barrel Hk3p g17 slide Really need to get these screws out of the new hopup unit so the unit actually stays together when I shoot it. The TW lower works but I think the valve knocker is out of spec after years of abuse. Edited December 7, 2015 by Alias1983 Quote Link to post Share on other sites
Kratisto Posted December 7, 2015 Report Share Posted December 7, 2015 (edited) *pretty glock photos* Very good looking Glock, man. But to truly reach glock perfection you need to change theUS frame to the Guarder euro version to match the euro slide markings It's a small detail that always bothers me in otherwise great realistic builds like this. Once you know the markings meaning it's very obvious and you can't unsee them... Edited December 7, 2015 by Kratisto 2 Quote Link to post Share on other sites
Dj_komodo Posted December 7, 2015 Report Share Posted December 7, 2015 Very good looking Glock, man. But to truly reach glock perfection you need to change theUS frame to the Guarder euro version to match the euro slide markings It's a small detail that always bothers me in otherwise great realistic builds like this. Once you know the markings meaning it's very obvious and you can't unsee them... Thanks for that piece of info bro:) i will change that frame later on... 2 Quote Link to post Share on other sites
NonEx Posted December 7, 2015 Report Share Posted December 7, 2015 How could you not get that right... Amateur! 2 Quote Link to post Share on other sites
Dj_komodo Posted December 7, 2015 Report Share Posted December 7, 2015 I knew that the comment about your MP9 silencer would get me back somehow 1 Quote Link to post Share on other sites
Safeword Posted December 12, 2015 Report Share Posted December 12, 2015 Just got my ACM Surefire xc1 light, looks super nice on the SA glock 19 7 Quote Link to post Share on other sites
pokira Posted December 12, 2015 Report Share Posted December 12, 2015 Safeword, that look very nice. Do you mind if i ask, Where did you get that? Quote Link to post Share on other sites
Safeword Posted December 12, 2015 Report Share Posted December 12, 2015 Safeword, that look very nice. Do you mind if i ask, Where did you get that? Thanks. I found it on Boomarms, pretty cheap for what you get: http://boomarms.com/shop/item.cfm?id=ACM-FL-XC1-BK Quote Link to post Share on other sites
Got Wood? Posted December 12, 2015 Report Share Posted December 12, 2015 These lights any good? Bulb unit seems very small! Quote Link to post Share on other sites
pokira Posted December 13, 2015 Report Share Posted December 13, 2015 I'm deciding between surefire XC1 and X300. Any idea? 3 Quote Link to post Share on other sites
Alias1983 Posted December 13, 2015 Report Share Posted December 13, 2015 X300 1 Quote Link to post Share on other sites
Geri Posted December 13, 2015 Report Share Posted December 13, 2015 Definetly x300... xc1 is pretty only on the g19 3 Quote Link to post Share on other sites
Safeword Posted December 13, 2015 Report Share Posted December 13, 2015 I have to agree, go for the x300. The xc1 is not a bad light, full metal built, my apartment is average size and this lights the whole ting up without problems but its so damn small, I tried it on about every gun with a rail I got but it looks good only on the G19 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.