tomjolly Posted April 20, 2018 Report Share Posted April 20, 2018 (edited) Not a fan of green frames personally, but it looks nice on that build. Is that the fowler industry slide? Edited April 20, 2018 by tomjolly 1 Quote Link to post Share on other sites
Dj_komodo Posted April 20, 2018 Report Share Posted April 20, 2018 Not a fan of green frames personally, but it looks nice on that build. Is that the fowler industry slide?Thanks, yes it is Quote Link to post Share on other sites
icolater Posted April 20, 2018 Report Share Posted April 20, 2018 Very slick DJ 1 Quote Link to post Share on other sites
CALLAHAN_88 Posted April 21, 2018 Report Share Posted April 21, 2018 Looks great as allways when Dj_komodo is posting. 1 Quote Link to post Share on other sites
Ivan le Fou Posted April 21, 2018 Report Share Posted April 21, 2018 Very nice indeed!Do you guys know if Guarder makes a threaded outer barrel (with markings if possible) for Glock 23? I would like to fit one of these comps on my G23 KJW. 1 Quote Link to post Share on other sites
NonEx Posted April 21, 2018 Report Share Posted April 21, 2018 Guarder don't as far as I know but there is a KJW Glock 23 threaded outer barrel. Search for "KJW 23 threaded barrel" and you should get some results. 1 Quote Link to post Share on other sites
Dj_komodo Posted April 21, 2018 Report Share Posted April 21, 2018 Very nice indeed! Do you guys know if Guarder makes a threaded outer barrel (with markings if possible) for Glock 23? I would like to fit one of these comps on my G23 KJW. Guarder does not but detonator has a threaded “silencerco” outer barrel for the kjw g23 http://boomarms.com/shop/item.cfm?id=DEN-BL-KJ19SIL&curr_code=USD 1 Quote Link to post Share on other sites
Ivan le Fou Posted April 21, 2018 Report Share Posted April 21, 2018 Guarder does not but detonator has a threaded “silencerco” outer barrel for the kjw g23 http://boomarms.com/shop/item.cfm?id=DEN-BL-KJ19SIL&curr_code=USD Ouuuuuuuh! Nice! Pricey, but nice. Quote Link to post Share on other sites
Wingman Posted April 21, 2018 Report Share Posted April 21, 2018 (edited) KJW has a threaded barrel for their G23. Its pretty generic and has zero markings. I've not seen one out there for awhile, but on occasion I have seen them on Evike (they do have it now listed under M23 for $29.99 US). In the picture it does show .40SW on the hood, however when I got mine, a couple years ago, there were no markings. They work fine, are made by Matrix, are steel and have 14mm positive thread. Strange that the G19/23 model is such popular pistol, but no one makes Salient style slides or barrels for them (other than really expensive full kits). Wish guarder would come out with some. Hope this is helpful. Edited April 21, 2018 by Wingman Quote Link to post Share on other sites
hitmanNo2 Posted April 21, 2018 Report Share Posted April 21, 2018 I contacted Guns Modify about G19 slides and they said as there was no good donor G19 they weren't interested in making G19 stuff but that will change when the TM comes out. They thought probably sometime this year. Quote Link to post Share on other sites
Wingman Posted April 21, 2018 Report Share Posted April 21, 2018 I've made 3 G19's using KJW G23's and Guarder slides, frames and some internals and only issue I had was the Guarder guide rod (which kept shifting during firing and was super annoying) and replaced it with the standard KJW guide rod and they work terrific. Is there any news as to when this TM G19 is going to appear? Do you think, with the introduction of the Elite Force licensed G19 "to be available soon" might put the brakes on the TM version? Quote Link to post Share on other sites
Dj_komodo Posted April 29, 2018 Report Share Posted April 29, 2018 A little update on my OD framework 5 Quote Link to post Share on other sites
CZFan Posted April 29, 2018 Report Share Posted April 29, 2018 Always wanted to see those mag plates in use. So glad I didn't buy em. they look so nice not on a gun.. Quote Link to post Share on other sites
CZFan Posted April 29, 2018 Report Share Posted April 29, 2018 (edited) RacingManiac, on 22 Feb 2018 - 9:51 PM, said:RacingManiac, on 22 Feb 2018 - 9:51 PM, said:RacingManiac, on 22 Feb 2018 - 9:51 PM, said: Holster question, anyone has a "TM Spec" solution for a pancake style kydex holster for a G34? TM slide, even this aftermarket one is wider than RS slide. The T-Rex Arms one I got works fine now after some heating and extra spacers for the screws, but it still rubs the top of the slide a bit. For aesthetic reasons though I kinda prefers the look of a pancake style construction : My G17 has a Raven Concealment holster for G21, which RS slide is slightly wider than the TM G17. There is a G34 size .45 Glock, the G41, but that specifically has a "narrow slide" which according to Glock is the same size as their 9mm slide(unlike the G21). So the trick of ordering a .45 holster for a TM won't work. One other option I guess is to get a OTG like the HK45 above for a G21 and cut the front of the holster off like I did to the OTG USP holster here to fit a 1911 with TLR1, the holster really get its retention from the light so that doesn't matter a whole lot....I just feel bad doing that to a $100 holster... no its not wider. the problem is not the slide! the problem is the frame. the rail area is like 2mm thicker (top to bottom, not side) over 17/22 spec! that's the part that makes it not fit. guarder, guns modify they all copied that wrong design (cause all they can do is copy, never create). you are thus limited to large frames (any 10mm, 45) holsters (Blackhawk etc) OR bad tolerance 17 holsters (fab defense etc). the above only applies to hard shells. since everybody and their dog makes kydex in their basement now, its on a per basis what fits what. leather holsters for 17 fit airsoft just fine btw as that stretches enough. no I don't have a pancake solution. just the various holsters for airsoft (black cat, guarder) which are all duty type or ispca. there WAS a Chinese knockoff of the serpa holster MANY years ago made to airsoft TM spec. airsoftmike (the dude on youtube who dresses like a ninja) made a review of it. but item is long gone from market due to awesome things such as patents and them using the Blackhawk name and label to send that worldwide Edited April 29, 2018 by CZFan Quote Link to post Share on other sites
Wingman Posted April 29, 2018 Report Share Posted April 29, 2018 (edited) Just went to buy a couple G17 and G18 FG frames but they are suddenly all sold out. Figures! Dj_Komodo, I'm liking that pistol more every time it comes up. While I'm not sure about the compensator, I do like the magazine pad. Care to say where I could purchase a couple? The Inforce light also looks best on Glocks. Currently using TLR-1 or actual M3 but the Inforce looks like it belongs there. Going to have to order one. I'm also interested in the process you used to "age" the slides finish. Overall, a superb job. Edited April 29, 2018 by Wingman 1 Quote Link to post Share on other sites
blobface Posted April 29, 2018 Report Share Posted April 29, 2018 A little update on my OD framework Damn sir, these are ridiculously nice. 1 Quote Link to post Share on other sites
Dj_komodo Posted April 29, 2018 Report Share Posted April 29, 2018 Just went to buy a couple G17 and G18 FG frames but they are suddenly all sold out. Figures! Dj_Komodo, I'm liking that pistol more every time it comes up. While I'm not sure about the compensator, I do like the magazine pad. Care to say where I could purchase a couple? The Inforce light also looks best on Glocks. Currently using TLR-1 or actual M3 but the Inforce looks like it belongs there. Going to have to order one. I'm also interested in the process you used to "age" the slides finish. Overall, a superb job. Thanks man! First of all its not foliage green, its olive drab (OD) Not sure what pad you mean but I got most from Boomarms anyways... Did nothing on the slide, it came that way. Quote Link to post Share on other sites
johny_blaze Posted May 21, 2018 Report Share Posted May 21, 2018 (edited) *suitcasey* picture of a friend's APS and my SA (compensator is a prototype will have a new version printed soon) Edited May 21, 2018 by johny_blaze Quote Link to post Share on other sites
antroa1985 Posted July 3, 2018 Report Share Posted July 3, 2018 My SRU SR-18 with 5KU SAS front kit, Houge grip sleeve and A1A Osprey suppressor. I'm not too keen on the golden outer barrel, the plan is to swap it for a black fluted one. Quote Link to post Share on other sites
Ivan le Fou Posted July 6, 2018 Report Share Posted July 6, 2018 Received my threaded outer barrel. Now to get it engraved. Quote Link to post Share on other sites
Wingman Posted July 6, 2018 Report Share Posted July 6, 2018 Like the look. Is that the KJW threaded barrel? What brand is the RMR sight mount your using, it is exactly what I'm looking for? Quote Link to post Share on other sites
Ivan le Fou Posted July 6, 2018 Report Share Posted July 6, 2018 Yup, the KJW threaded barrel bought from taiwangun. As for the RMR and the mount, here you go:http://www.shootercbgear.com/product_info.php?products_id=11839http://www.shootercbgear.com/product_info.php?products_id=12223 Quote Link to post Share on other sites
Wingman Posted July 7, 2018 Report Share Posted July 7, 2018 Thank you Quote Link to post Share on other sites
Ivan le Fou Posted July 12, 2018 Report Share Posted July 12, 2018 Need to take a better picture, but here it is in its final form: 1 Quote Link to post Share on other sites
blobface Posted July 22, 2018 Report Share Posted July 22, 2018 Guarder x KJ Full steel Glock 23 For most of its life this was a useless wall hanger, but thanks to Volante's BBU this is a bit of a beast now. 4 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.