NonEx Posted July 22, 2018 Report Share Posted July 22, 2018 (edited) Nice! Are those the North East sight set, or whatever they are called? Had my eye on them but couldn't really justify getting a pair "just because" since they are like $85 USD. Gonna have to grab me one of those Volante nozzle for my Glock 19 steel build Edited July 22, 2018 by NonEx Quote Link to post Share on other sites
johny_blaze Posted July 22, 2018 Report Share Posted July 22, 2018 And are those TTI base pads realSent from my E5823 using Tapatalk Quote Link to post Share on other sites
Dj_komodo Posted July 22, 2018 Report Share Posted July 22, 2018 2 hours ago, johny_blaze said: And are those TTI base pads real Sent from my E5823 using Tapatalk http://boomarms.com/shop/item.cfm?id=BM-BASE-STGK-BK&curr_code=USD Quote Link to post Share on other sites
Dj_komodo Posted July 22, 2018 Report Share Posted July 22, 2018 yes, i was bored 4 2 Quote Link to post Share on other sites
hitmanNo2 Posted July 22, 2018 Report Share Posted July 22, 2018 Holy moly that's a lot of Glocks. Go on then, which one is your favourite? Quote Link to post Share on other sites
Dj_komodo Posted July 22, 2018 Report Share Posted July 22, 2018 35 minutes ago, hitmanNo2 said: Holy moly that's a lot of Glocks. Go on then, which one is your favourite? come on man, you can't really ask me that question I love each one exactly the same 1 Quote Link to post Share on other sites
Wingman Posted July 23, 2018 Report Share Posted July 23, 2018 Good Lord that is just plain awesome. Going to show that picture to my Wife and prove that I'm no where near the limit. Impressive, most impressive! Quote Link to post Share on other sites
hitmanNo2 Posted July 23, 2018 Report Share Posted July 23, 2018 13 hours ago, Dj_komodo said: come on man, you can't really ask me that question I love each one exactly the same Ha. I thought you might struggle with that. As long as you give them all equal attention heh. Quote Link to post Share on other sites
Dj_komodo Posted July 23, 2018 Report Share Posted July 23, 2018 Good Lord that is just plain awesome. Going to show that picture to my Wife and prove that I'm no where near the limit. Impressive, most impressive!Lol, thanks mate! Quote Link to post Share on other sites
Ivan le Fou Posted July 23, 2018 Report Share Posted July 23, 2018 4 Quote Link to post Share on other sites
intinerious Posted August 5, 2018 Report Share Posted August 5, 2018 ......Ignore the rifle? The Glock is still a work in progress but it took me a while to go ahead with the 6 second mount project given the rear sight on the TM Glock slides aren't dove tail mounted and I am a stickler for details....so I don't want the sights on the slide if I run a 6 second mount. The slide is an expensive Guarder 2016 slide; with proper dovetail cuts for the rear sight. That means you can't see the screw for retaining the BBU to the slide. I gotta say the new Guarder slides are very nice, and the price matches the quality too; it was around the same price you would expect of a Prime or Nova slide, but it does come with a few more things like a BBU with a plastic rear plate. The frame is an HK3P one, and I didn't put the ALG Magwell onto the gun because the stock WE Glock magazine baseplates don't work with the magwell. I'm hoping getting some extended mag base plates might make it work (do not that the TTI ones won't work because of the mag base pin at the back of the mag once you use the TTI mag base). The red dot is an Ace1Arms T2 copy, which is real nice, and pretty much externally the same as a real T2 (I've got a real T2 I compared side by side with). The BBU I'm currently using is Volante's, and I'm hoping that I can run an extended inner barrel through the suppressor and the BBU would allow enough gas into the barrel to propel bbs out of the gun at around 1.3J. This Glock will be my primary for outdoor pistol-only games in Hong Kong. 2 Quote Link to post Share on other sites
k.a Posted August 6, 2018 Report Share Posted August 6, 2018 Is the silencer also a ace 1 arms, if so don't they come with extended inner barrel ? Quote Link to post Share on other sites
k.a Posted August 6, 2018 Report Share Posted August 6, 2018 14 hours ago, intinerious said: ......Ignore the rifle? The Glock is still a work in progress but it took me a while to go ahead with the 6 second mount project given the rear sight on the TM Glock slides aren't dove tail mounted and I am a stickler for details....so I don't want the sights on the slide if I run a 6 second mount. The slide is an expensive Guarder 2016 slide; with proper dovetail cuts for the rear sight. That means you can't see the screw for retaining the BBU to the slide. I gotta say the new Guarder slides are very nice, and the price matches the quality too; it was around the same price you would expect of a Prime or Nova slide, but it does come with a few more things like a BBU with a plastic rear plate. The frame is an HK3P one, and I didn't put the ALG Magwell onto the gun because the stock WE Glock magazine baseplates don't work with the magwell. I'm hoping getting some extended mag base plates might make it work (do not that the TTI ones won't work because of the mag base pin at the back of the mag once you use the TTI mag base). The red dot is an Ace1Arms T2 copy, which is real nice, and pretty much externally the same as a real T2 (I've got a real T2 I compared side by side with). The BBU I'm currently using is Volante's, and I'm hoping that I can run an extended inner barrel through the suppressor and the BBU would allow enough gas into the barrel to propel bbs out of the gun at around 1.3J. This Glock will be my primary for outdoor pistol-only games in Hong Kong. Is the silencer also a ace 1 arms, if so don't they come with extended inner barrel ? Quote Link to post Share on other sites
intinerious Posted August 6, 2018 Report Share Posted August 6, 2018 2 hours ago, k.a said: Is the silencer also a ace 1 arms, if so don't they come with extended inner barrel ? The silencer's a North East Airsoft Surefire clone, they come as a mock suppressor only so there's no extended inner barrel for it. Right now I'm going to salvage a stock TM MWS barrel which will fit the threaded barrel + suppressor setup. Need to 3D print a barrel spacer for the suppressor though. Quote Link to post Share on other sites
kenbumcing Posted September 26, 2018 Report Share Posted September 26, 2018 (edited) my old stuff....one of them is using Guarder's glock 17 steel slide which requires 200% strenghtened recoil spring.. https://theworldofpot.blogspot.com/2018/09/austrian-finest.html Edited September 26, 2018 by kenbumcing Quote Link to post Share on other sites
si3n4 Posted October 7, 2018 Report Share Posted October 7, 2018 Getting ready for my next build. Probably a compensated G19 but might go with G17. Anyone have any experience with the dynamic precision or strike industries compensators? I really want to get a G42, but it looks like I’ll have to wait until the Umarex/VFC ones are more readily available. Quote Link to post Share on other sites
Dj_komodo Posted October 9, 2018 Report Share Posted October 9, 2018 A little dark camo on the slide & comp and the build is complete 5 Quote Link to post Share on other sites
Got Wood? Posted October 10, 2018 Report Share Posted October 10, 2018 Is there still no one who makes a proper aluminium 17L slide? Quote Link to post Share on other sites
intinerious Posted October 10, 2018 Report Share Posted October 10, 2018 41 minutes ago, Got Wood? said: Is there still no one who makes a proper aluminium 17L slide? http://boomarms.com/shop/item.cfm?id=PRIME-SL-TMG17L&curr_code=USD This what you are looking for? Quote Link to post Share on other sites
Got Wood? Posted October 10, 2018 Report Share Posted October 10, 2018 Oh, yes! Thank you! 1 Quote Link to post Share on other sites
si3n4 Posted October 10, 2018 Report Share Posted October 10, 2018 On 10/9/2018 at 2:37 PM, Dj_komodo said: A little dark camo on the slide & comp and the build is complete Wow. That is just sexy. Nicely done DJ_komodo. Did you ever post your build details for this beauty? Quote Link to post Share on other sites
PureSilver Posted January 20, 2019 Report Share Posted January 20, 2019 Still needs a few finishing touches, but the world's hardest-to-holster pistol is now largely complete. Guns Modify trigger assembly, steel hop-up unit and frame pins, UAC stainless steel internal pins, Guarder steel everything else. The only remaining TM part is #G17-19, the front chassis retaining screw. Fitted with ACM Six Second mount, T1 and XC1, and Guns Modify lens protector which will soon be replaced to prevent fouling on the G17 slide's front sight. Vicious kick with APS CO2 magazines, which will be modified for liquid CO2 refill in a DevilHunter-esque manner. Apologies as usual for the horrible iPhone photos... I also have a PGC aluminium slide and outer barrel (threaded, so the extended inner doesn't stick out) for when I'm not allowed to use CO2 and need something a little less demanding. 4 Quote Link to post Share on other sites
Delta_Knight Posted January 20, 2019 Report Share Posted January 20, 2019 (edited) My all-sort-of-bits Glock 17, that I use for 3-gun APSC. It has given me so much heartache, but when it works it shoots well. Started life as a twenty five quid Army R17, but nearly everything has been replaced. Ready Fighter MOS kit, real Glock RMR plate. GunsModify and Guarder everything else, inside and out. Oh, a Crazy Jet barrel too. I have an ARC Comp for posing, but it is a royal pain in the bum actually shooting with it. Looks nice with an X300, but a pain to holster. Running a Safariland 579 GLS on the UBL at the moment. Must have been through several shops fixing and replacing bits, so let''s see how long it last this time 🙄 Edited January 20, 2019 by Delta_Knight 2 Quote Link to post Share on other sites
Wingly_Actual Posted January 21, 2019 Report Share Posted January 21, 2019 I probably asked a while back, but has anyone used Volante's BBU with a steel slide and CO2 mags? Quote Link to post Share on other sites
PureSilver Posted January 23, 2019 Report Share Posted January 23, 2019 On 1/21/2019 at 1:12 AM, Wingly_Actual said: I probably asked a while back, but has anyone used Volante's BBU with a steel slide and CO2 mags? Yep, the G34 up there runs a steel slide (when it's a G34), APS CO2 magazines and a second-generation Stratos. The cyclic speed and recoil is (as usual) orders of magnitude better than with liquid-refill propellants, and even with the Guarder steel-specific spring and one of the included recoil buffers I feel like it could use a stiffer spring. I have also run it with CO2 with its PGC G17 slide (which also has a Stratos), and it smashes the slide into the frame so hard the impact points on the slide literally squashed ~1mm at the impact points. Adding a second recoil buffer stopped that, but I won't be running it on CO2 unless it's got the steel slide or it's really cold - it's just not necessary. The BBU does come with warnings not to use it with gases over a certain pressure and YMMV - I have barely put 5 magazines through it in this configuration. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.