Paul202 Posted January 24, 2013 Report Share Posted January 24, 2013 ^^That's a great picture. Quote Link to post Share on other sites
Squad 701 Posted January 24, 2013 Report Share Posted January 24, 2013 For those who may have missed the earlier post, a couple of comparrison shots of the Stark G19 against some other much more expensive kit ! Judge for yourself. http://www.arniesairsoft.co.uk/forums/index.php?/topic/134123-glock-picture-thread/?p=2593173 Quote Link to post Share on other sites
-Clover- Posted January 24, 2013 Report Share Posted January 24, 2013 (edited) Story from Taiwanese users is that the TM stuff won't work without some work... Well that's a shame... did they post specifics at all? @Paul202: thanks! @Squad 701: that's definitely a nice collection you've got there, I'm jealous! Edited January 24, 2013 by -Clover- Quote Link to post Share on other sites
RacingManiac Posted January 24, 2013 Report Share Posted January 24, 2013 http://www.arms-cool.net/forum/thread-128658-1-5.html The hop-up/inner barrel holder thing uses TM rubber and barrel but the chamber itself it custom. The text said its similar to TM G26 but he did not verify if it fits. The BBU is a derivative of G18C's design, but not compatible with G18, neither does the nozzle. They said it has issue using TM mag as the mag will bottom out before the mag catch does, and need some modification to the grip to allow the TM mag works. But I've heard some say it works fine, so tolerance issue? The hammer mechanism looks more similar to G18C also... http://www.arms-cool.net/forum/thread-126288-2-13.html This was asking if the Stark Arms/VFC G17 can work with Guarder slides, and the conclusion was its easier to use a WE for that. They mentioned the BBU is a different design... I am really not sure about the VFC stuff(now that they are in M&P also...), most still are talking about the same issue as their GBBR/AEG stuff, beautiful trades and exterior, good attention to detail, but only so-so internal... Quote Link to post Share on other sites
RacingManiac Posted January 25, 2013 Report Share Posted January 25, 2013 (edited) Trying on the cheapo supressor for size... I wish they make supressor height sights for TM... Edited January 25, 2013 by RacingManiac 2 Quote Link to post Share on other sites
frogfish Posted January 25, 2013 Report Share Posted January 25, 2013 Or a silencerco Osprey clone..... 2 Quote Link to post Share on other sites
cavapanther Posted January 25, 2013 Report Share Posted January 25, 2013 Just got this bad boy: http://i367.photobucket.com/albums/oo113/Clover770077/IMG_1476.jpg Stark-Arms/VFC Glock 19 I must say, this has to be one of the finest Glocks I've owned. That's a real-deal +2 baseplate on there, and the extra one is the Stark/VFC one. Will do a write up soon for those who are interested. Points to note off hand though: -Compatible with full size Tokyo Marui Glock 17 mags -Completely compatible with 9mm holsters (both leather and Serpa/Kydex) -Fit and finish is SPECTACULAR (I've owned everything; Guarder, Shooters Design, Prime) and out of the box this thing has a near flawless finish -Trademarks *everywhere* Where did you buy this Glock? I've been looking everywhere Quote Link to post Share on other sites
WillB Posted January 25, 2013 Report Share Posted January 25, 2013 @RacingManiac That's one beautiful Glock! Good job! Quote Link to post Share on other sites
-Clover- Posted January 25, 2013 Report Share Posted January 25, 2013 (edited) Where did you buy this Glock? I've been looking everywhere I bought mine off Ehobby Asia just this past Friday. They seem to have sold out already though... And just so we can keep this going as a picture-thread: My old Tokyo Marui in a beautiful tan leather holster by DeSantis I believe the old girl was just wearing a Shooters Design metal slide and barrel with the addition of Gunsmodify Trijicon-clone night sights in this pic. Edited January 25, 2013 by -Clover- Quote Link to post Share on other sites
TeowneD Posted January 26, 2013 Report Share Posted January 26, 2013 got a pic request guys: Glock 26 advance with some kind of LAM / laser, light combo. I tried searching on google but it didn't yield much. I'm trying to think up a way to get something like the pistol in Halo 3 ODST Quote Link to post Share on other sites
RacingManiac Posted January 26, 2013 Report Share Posted January 26, 2013 Got a hold of a Dremel and tried to do some work to the grip....ideally I'll probably do it again with a new grip...but as a proof of concept I think it works ok...Under cut the trigger guard a bit, and grind off the finger groove humps... I think trigger guard cut might be better served with a mill... 2 Quote Link to post Share on other sites
oRb Posted January 26, 2013 Report Share Posted January 26, 2013 Quote Link to post Share on other sites
skyrider1 Posted January 26, 2013 Report Share Posted January 26, 2013 RM, truly a custom build. Looks like you have really made that pistol work for you. Looks amazing! How do you like the grip without the grooves? oRb, very nice! Liking the RTF look. How are you liking the surefire ultra? Quote Link to post Share on other sites
Half Trigger Posted January 26, 2013 Report Share Posted January 26, 2013 Quote Link to post Share on other sites
RacingManiac Posted January 26, 2013 Report Share Posted January 26, 2013 RM, truly a custom build. Looks like you have really made that pistol work for you. Looks amazing! How do you like the grip without the grooves? oRb, very nice! Liking the RTF look. How are you liking the surefire ultra? I was not planning to cut the groove hump off, but then after I under cut the trigger which shifted your hand up, the groove is basically at the wrong place so i figure I might as well... Personally I was never a fan of any finger groove, since it kinda forces you to grab the pistol a certain way....I need to use the gun some more to really arrive at a conclusion for the mods though....I am still tweaking it... Quote Link to post Share on other sites
crackisbad Posted January 26, 2013 Report Share Posted January 26, 2013 My OCD loves your perfectly lined stippling. A Lot. I really like the look of that; you didn't do a grip reduction, did you? 1 Quote Link to post Share on other sites
RacingManiac Posted January 26, 2013 Report Share Posted January 26, 2013 No grip reduction, I didn't go that far with the modification.... Quote Link to post Share on other sites
crackisbad Posted January 28, 2013 Report Share Posted January 28, 2013 That's what I thought, not really into grip reductions because of my large hands I have a MAGLOC on one of my Glocks and was thinking of getting this grip adapter for another so it is good to know it looks that good on a regular grip profile Quote Link to post Share on other sites
RacingManiac Posted January 28, 2013 Report Share Posted January 28, 2013 That's what I thought, not really into grip reductions because of my large hands Yeah I don't find the need for it anyway...after using Glock a lot more going to the 1911 feels like I am choking a chicken or something.... 1 Quote Link to post Share on other sites
aznriptide859 Posted February 1, 2013 Report Share Posted February 1, 2013 HK3P Gen4 G18C vs. TM Glock 17. 1 Quote Link to post Share on other sites
The Pretender Posted February 14, 2013 Report Share Posted February 14, 2013 My latest purchase: Just a quick question as well, do slides and frames for TM glocks fit WE glocks or are there slight difference in the designs? Quote Link to post Share on other sites
PreacherMan Posted February 14, 2013 Report Share Posted February 14, 2013 I fit a Guarder frame to an HK3 Glock a while ago, it worked great. Didn't like it as much, though, felt and looked more plastic. 1 Quote Link to post Share on other sites
aznriptide859 Posted February 14, 2013 Report Share Posted February 14, 2013 HK3P plastic definitely feels better quality than Guarder. 1 Quote Link to post Share on other sites
NonEx Posted February 14, 2013 Report Share Posted February 14, 2013 Agreed! See here for more info; http://www.arniesairsoft.co.uk/forums/index.php?/topic/207953-which-airsoft-glock-frame-is-the-most-rs-like-in-materials-and-feel/ Quote Link to post Share on other sites
oRb Posted February 15, 2013 Report Share Posted February 15, 2013 Got a Surefire DG-11 Switch lately. I can tell ya it's not the same without the switch! Great piece of accessoire! cheers orb Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.