Jump to content
krame

Glock Picture Thread

Recommended Posts

Spring Pistol?

 

Nope it's GBB made by KJW. I found some info on real glock carbon fiber frames and the real ones aren't actually carbon fiber. It's a pattern applied to a standard frame through water transfer printing. Mine might have a pattern printed onto it in some way or another.

Share this post


Link to post
Share on other sites

nice pistol there whosloosin92...even though i have had a bad experience with the kjw glock it is still a very nice gun.

 

004-8.jpg

 

this is the family shot of my glocks...all of them are KWA ;) ...all of them are metal slided ;)

 

the two black ones are both 23Fs for those :gun2: times :lol: ...both are HurricanE kitted and 4 of 5 hicaps are hi-flowed

the top of the two has a PDI barrel while the bottom doesnt. (as for the velcro on the top 23f its to keep my hands warm during night games :lol: )

 

silver is a 19...got it in a trade since im in that phase :crazy:

 

not shown is my 18c and my 26c which are currently used for parts for the 23fs :blink:

Share this post


Link to post
Share on other sites
nice pistol there whosloosin92...even though i have had a bad experience with the kjw glock it is still a very nice gun.

 

this is the family shot of my glocks...all of them are KWA ;) ...all of them are metal slided ;)

 

the two black ones are both 23Fs for those :gun2: times :lol: ...both are HurricanE kitted and 4 of 5 hicaps are hi-flowed

the top of the two has a PDI barrel while the bottom doesnt. (as for the velcro on the top 23f its to keep my hands warm during night games :lol: )

 

silver is a 19...got it in a trade since im in that phase :crazy:

 

not shown is my 18c and my 26c which are currently used for parts for the 23fs :blink:

 

Nice little family, I personally have 2 G34s, 1 TM & 1 KSC So I can use the 50 round mags, a G23f ands a G18c. My silver metal slided TM is on this topic somewhere.

 

Billy

Share this post


Link to post
Share on other sites

Has anyone ever found a guide to stripping the frame of a TM Glock 17?

I want to install one of thoses Guarder frames but Im not really sure of the fitting process.

Ta.

Share this post


Link to post
Share on other sites

I don't know of any guide but I found that it was pretty straight forward when I tried doing it. I have had two Guarder frames and neither needed much fitting, I basically just had to move parts over. However, if you go further into the gun it can get a bit more complex (the hammer mech is a royal %$(#.

 

 

Share this post


Link to post
Share on other sites
Has anyone ever found a guide to stripping the frame of a TM Glock 17?

I want to install one of thoses Guarder frames but Im not really sure of the fitting process.

Ta.

 

Chris

 

Contact "the Sniper", he can give the good and bad points over the Guarder frame and any help if needed, Incl pics if required.

 

Billy

Share this post


Link to post
Share on other sites

Thanks for the help guys, much appreciated.

Im also about to order a Boomarms Glock 34 slide, can anyone give any recommendations for a decent upgraded recoil spring? (I don't know anything about the TM Glocks) What about a longer inner barrel also?

Thanks again guys.

 

Edit.

Is a longer inner barrel really required anyway?

Edited by chris u'5

Share this post


Link to post
Share on other sites

Any upgraded recoil spring/guide setup that fits a G17 will fit the G34. As for the inner barrel, I wouldn't think it's necessary, but if you want to increase your accuracy then go ahead and get a longer one.

Share this post


Link to post
Share on other sites
Chris

 

Contact "the Sniper", he can give the good and bad points over the Guarder frame and any help if needed, Incl pics if required.

 

Billy

 

 

Chris , Billy is correct I can give info on the guarder frame, and I suppose I will have to put some more pics of my glock 34's up

 

As for the frame both the ones I have fitted have had problems (related to the quality of the frame). I found the plastic very brittle and changed mine back and will use the guarder one for molds to make a magwell

 

fitting was (personally) easy the hammer mech come out in one piece and the trigger bar is slotted in making it easer than the KSC glocks

 

the boomarms 34 slide and barrel on the other hand is a QUALITY piece of kit and I have had no problem with it but it does IMO need a buffer fitting to the recoil rod to stop it getting damaged when it hits the rails (pics to follow)

 

it needs a longer inner barrel , tm hicapa fits but I need to confirm the length

 

If you need any help PM me and I will see what I can do

 

:rifle:

 

 

 

 

Share this post


Link to post
Share on other sites
Chris , Billy is correct I can give info on the guarder frame, and I suppose I will have to put some more pics of my glock 34's up

 

As for the frame both the ones I have fitted have had problems (related to the quality of the frame). I found the plastic very brittle and changed mine back and will use the guarder one for molds to make a magwell

 

fitting was (personally) easy the hammer mech come out in one piece and the trigger bar is slotted in making it easer than the KSC glocks

 

the boomarms 34 slide and barrel on the other hand is a QUALITY piece of kit and I have had no problem with it but it does IMO need a buffer fitting to the recoil rod to stop it getting damaged when it hits the rails (pics to follow)

 

it needs a longer inner barrel , tm hicapa fits but I need to confirm the length

 

If you need any help PM me and I will see what I can do

 

:rifle:

 

Sniper

 

you forgot to mention the stop pin on the slide. it's better to use something new to replace, rather destroy the original slide to swap it over.

 

Billy

 

Share this post


Link to post
Share on other sites

Now that it is summer I have been able to start doing a lot more skirmishing with my trusty G17. I liked this gun as a project and a plinker but my respect for it has grown even more after using it as a combat weapon (I play CQB with 4-6 people). I have put hundreds of rounds through it without a single misfire and I find that I can hit small targets all the way across the field (100-120 feet). I really don't know how I could improve on the gun (but I do need a PDI piston head and more mags, PM me if you want to sell some).

 

 

tac174wx7.jpg

 

tac173ze4.jpg

 

tac171zt3.jpg

 

If anyone is interested in an updated bits and pieces list let me know and I can post one up.

Share this post


Link to post
Share on other sites

Close. The frame was a Guarder enhanced (so that I could get the right trades) I worked with RSP to reshape it into a Generation 2 frame (I don't like rails) and then refinished it to cover the work. I also dropped in a Guarder Serial Number plate to complete the effect. Basically this is a completely custom one off gun which is one big reason why I like it so much. In a world where so many have Glocks it's hard to come up with something special.

Share this post


Link to post
Share on other sites
miniracer5.jpg

miniracer6.jpg

 

Does anyone know how and what he used to cut the frame? I tried PMing him directly, but no answer yet, and I'm eager to start work as soon as possible on my own glock.

Share this post


Link to post
Share on other sites

I'm assuming a solder

 

 

glox.jpg

 

Both slides are mine, glock was a friends. Crappy old camera, actually, now that I have a new camera I should take more pictures....to the picturemachine!!

Share this post


Link to post
Share on other sites
WhutJP, gun works very well with an upgraded recoil spring; it just takes some breaking in to do; after 50 or so shots the slide cycles smoothly.

 

I glad your work fine.

 

My first KWA 23F perfofrmed great, right upto the point the slide jumped off the frame.

 

Billy

Share this post


Link to post
Share on other sites

I've been looking around for a replacement slide stop for a TM glock 17 but I've had no luck.

Has anyone seen one listed anywhere? (UK or HK)

Share this post


Link to post
Share on other sites
I've been looking around for a replacement slide stop for a TM glock 17 but I've had no luck.

Has anyone seen one listed anywhere? (UK or HK)

 

Never seen one listed anywhere. My tech guy made mine from scratch.

 

Billy

Share this post


Link to post
Share on other sites

My beloved TM glock 17 was destroyed at a recent op so i went ahead and purchased a glock 19 since i plan on buying the real steel version before september.

 

Here she is, i apologize for the craptastic picture.

 

glocktexturela7.jpg

Shot with iPhone at 2008-06-26

Share this post


Link to post
Share on other sites

Is that a KWA G19? I don't recall them having serial plates, correct me if I'm wrong.

 

On another note, I've noticed that KWA's website no longer features the M series (Glock series). Are these going out of production, and if so, does anybody know where I could get a G19, preferably of high quality. I wish TM made one, as I'm much more comfortable with the G19. And with a somewhat lack of aftermarket parts, should I just give up and get a G17 instead?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.