Jump to content
krame

Glock Picture Thread

Recommended Posts

50 minutes ago, hitmanNo2 said:

Boom has G17 and G34 steel slides for VFC Glocks.

G19, G17 and G34. All of them in excess of $360...

EDIT: For reference, Guarder's steel G19, G17 and G34 slides are $140-$185. The price difference between the two leaves you enough left over to buy one of their new complete lower frames. You'd need to add a nozzle, hop-up unit and inner barrel but you get very nearly a completely upgraded gun for the price of a single slide set.

Edited by PureSilver

Share this post


Link to post
Share on other sites

Without any first-hand experience with 5KU, I would say Guarder. Tried and tested brand that works and is well made, IMO.

Share this post


Link to post
Share on other sites

Hi non!, and the guarder one will match the gold tint with the gunsmodify gold tin-nitride recoil spring guide??

GM0138-1L.jpg

Edited by HamletV

Share this post


Link to post
Share on other sites

Highly doubtful that they will be a perfect match (or even close) because it's different manufacturers and also most likely different base materials (aluminum/steel/pot metal) and coatings/coating methods. No way to tell how well they match up from just pictures. If you want the items matching as closely as possible your best bet is to find both barrel and spring guide from the same manufacturer in gold finish.

Share this post


Link to post
Share on other sites

Well, gold is a bit to blingy for my taste but I get what you are going for. In that case your best bet is gold parts from the same manufacturer or having black parts from the same manufacturer refinished in "gold" but that will probably be very expensive.

Share this post


Link to post
Share on other sites
7 hours ago, Got Wood? said:

Never got this new fad with golden guns.

You don't like it?, the combination gold/matte black looks sophisticate,... well for my personal taste!, and that glock is like a john wick's gun

Edited by HamletV

Share this post


Link to post
Share on other sites
You don't like it?, the combination gold/matte black looks sophisticate,... well for my personal taste!, and that glock is like a john wick's gun

Not personally, no. For me, genuine weapons and Airsoft weapons are pieces of kit. Supposed to be battered and abused, serve a purpose but as a tool, nothing more.

 

Bling and shiny red, blue, gold guns and cradled weapons just baffle me!

Share this post


Link to post
Share on other sites

The gold is supposedly Titanium Nitride coating, the same coating seen on some drill bits and cutting tools. For airsoft it's entirely looks, but for real steel it does have good properties for steel exposed to a lot of heat... so you'd almost need to add another cosmetic black coating just to cover the gold if you want that physical property on the metal's surface.  

Share this post


Link to post
Share on other sites

Real steel guns and airsoft can't be abused in the same way, finishes are differents, the metal parts are differents too, so every or mostly all external parts are just for looks.

Personal tastes for all!

  • Like 3

Share this post


Link to post
Share on other sites

Finally managed to get my hands on a thread cover for my KJW threaded outer barrel.

As if it wasn't hard enough to find literally ANYTHING in 14+, well... the thread spacing also had to be different. The spacing on the gun-modify thread cover are tighter, or it is the outer barrel's thread spacing that is wider. Which would explain why, once mounted, the suppressor is still all wobbly.

So, what outer barrel can fit KJW?

Share this post


Link to post
Share on other sites

Yes, they do make one.

14CCW, not CW (which is the thread of the KJW outer barrel).

Less precision? What is that?

As to why I am struggling, the cover and barrel are not threaded the same way.

Share this post


Link to post
Share on other sites

Huh... weirdly enough the gun-modify thread cover does not fit G&P 14CW threads either...

*and yes, this is a 14CW thread cover, not a 14CCW*

  • Like 1

Share this post


Link to post
Share on other sites
On 1/7/2016 at 12:32 PM, klh31 said:

The G17 Bell version:

 

EgtGk9.jpg

 

The G34 WE version:

 

qqAVvX.jpg

 

The G17 SA version:

 

4mdPBl.jpg

 

The G18C TM version:

 

DOAoHf.jpg

How is the bell one in comparison to the others? Is it worth it? Or too much struggle?

Share this post


Link to post
Share on other sites

Well, after some difficulties (slide difficult to go back to its original position) and some harsh solutions applied (mainly oil and strong manipulation), everyting went back to order and it is still working fine. Therefore nothing special to report on the Bell.

 

 

Share this post


Link to post
Share on other sites
2 hours ago, klh31 said:

Well, after some difficulties (slide difficult to go back to its original position) and some harsh solutions applied (mainly oil and strong manipulation), everyting went back to order and it is still working fine. Therefore nothing special to report on the Bell.

 

 

Many guys said that the bell pistols are bad, and they no worth, maybe is the fact that they treat they're guns like real steel guns (knowing that they are made of soften materials...) But I'm not like that kind of guys banging arround and dropping the gun! That kind of guys I call them "the axe hands" or "scissors hands" cuz they break everything they touch hahaha

Even so, do you recommend the bell one?

Edited by HamletV

Share this post


Link to post
Share on other sites

Long time someone posted some pictures, so here's some of my updated glocks:

Painted my A1A Agency slide black.

0Tx93q.jpg

LmgHCr.jpg

VFC g17 gen 4 with EMG sai slide

1pKV4L.jpg

G6CuFI.jpg

 

Re-stippled frame on my WE G19 with A1A slide

eDSmHa.jpg

8inbnn.jpg

5XE8C2.jpg

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

That looks really cool, the stipple is like i did to my glock17, and I love the gold barrel, I have one But is more orange gold.. Btw what paint do you use on the slide?

Share this post


Link to post
Share on other sites

How are the EMG SAI kits for VFC Glock, do they fit and function properly? What about the looks, are they on par with GunsModify, Prime... Are the sights steel?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.