Jump to content
krame

Glock Picture Thread

Recommended Posts

My last G19

 

glockc-1.jpg

 

The g19 i had before that:

 

G19-1.jpg

 

the g19 i had before the one i had above!:

 

4-3.jpg

 

Glock 17 with caspian slide and a load of internal mods (ignore the gilded v12)

 

collection2.jpg

 

and here you can see the 17 and my 18c and all the mags i had

 

GunDisplay.jpg

Share this post


Link to post
Share on other sites

Ironically, after I spent so much time selling off all my KSC Glocks I just ended up with a boat load of them in a trade (3.5 guns). This is the first one and the only one that is fully tuned. This gun was actually built by Junior and seems really smooth. I am actually planning to sell it though since the KSC hop-up is so much worse than the my Steel TM's (I also dig steel). However, it is a fun piece to shot and for a normal side arm it is more than accurate enough. I snapped a few quick pictures of it since even though I'm not a fan of tan I think it looks quite sharp.

 

I'm open to people giving me a good reason to hang onto this.

 

tang171pn1.jpg

 

tang172sp5.jpg

 

tang173pn1.jpg

 

 

 

Bits:

 

KSC G17

 

Pro-Arms Tan Frame

 

Guarder Reinforced Mag Catch

Guarder Recoil Spring and Rod

 

Hidakaya 150% Hammer Spring

 

Shooters Design Part 10 (feed Ramp)

Shooters Design Rocket Valve

Shooters Design G17 Slide and Barrel

 

Proud Plug Spring

Proud Mag Base

 

Custom High Flow

Edited by Romulus

Share this post


Link to post
Share on other sites

There is certainly nothing wrong with the Tan. I think that it mainly is a matter of preference.

 

I would never ever want to have a gun with an OD frame either.

 

My hope is that I can pass this piece along to someone who really appreciates the color (and how nicely the gun shoots).

Share this post


Link to post
Share on other sites

well it certainly looks nice...and if in combat you run out of bbs/gas you can always ask a team mate and they might have a spare mag?

Share this post


Link to post
Share on other sites

That's what I'll carry this for :)

 

_________________

 

I recently decided that it would be nice to have some sort of KSC Glock in my collection. While I am a vocal hater of the KSC hop-up and have two fully tuned TM steel slided Glocks (17 & 26) my first gun was a KWA Glock 17 and the KSC name has so much airsoft history and is so popular that it seemed like I really ought to have one in my collection. As a compromise I decided that my KSC Glock would be one that TM didn't make so that I could say "geez, I sure wish that this had a TM hop-up". The 18C also was a good choice because it can fufill a skirmish role for me. In a word it is my Plan B, if something goes wrong using only pistols I can still have a moment of spray and prey.

 

At bit of history of the gun. The upper on this gun is an old school KSC Glock 18C slide. It has deeply engraved trades and has been bead blasted to make it silver (I have never seen a factory one of these in silver). Frankly, I haven't seen many of these slides around anywhere which makes it extra special. This slide originally belonged to ViciousV10's and is featured in many of his Glock pictures. It was then sold onto Junior who also used it extensively. Finally, I got in from Junior in a trade and I now intend to hold on to it for quite some time.

 

As far as my plans for the build what you see below is just the beginning. I intend to build this into a collectors piece but also use it for skirmishing. On the way already is an old school frame, more internal parts, and shortly a few RS parts. I also need to do some stuff like swap barrels, find an extended slide stop, etc. Lots of work to be done.

 

tt18c2vh3.jpg

 

tt18c1qk8.jpg

 

tt18cvj0.jpg

 

Bits:

 

Glock 18C Parts List

 

KSC Glock 18C

 

SD Floating Valve

SD Feed Ramp

SD "Glock" Mag Base

 

Hidakaya Floating Valve Spring

 

Guarder Recoil Spring

Guarder Recoil Rod

Guarder Hammer Spring

 

PGC Hi Flow

 

KSC Glock 18C Outer Barrel

KSC Metal Slide (Engraved Trades/Beadblasted)

 

If you have suggestions about how I can make this more unique I'd love to hear them.

Share this post


Link to post
Share on other sites
A bit off topic, but how do you make those patterns on the handle? Is there a site with tuts?

 

I'm not sure what you are talking about (or if you are talking to me). If you are let me know and I'll try to answer.

 

 

What real steel parts are you planning on getting for it? I need some ideas for my G26. :P

 

I just dropped on a Hogue grip (to cover up the lack of trades and make it com comfortable). I have an RS optic mount which I will throw on at some point just for fun. I am also planning to buy a clipdraw on of these days and it may spend some time on this gun. I need to get a RS enhanched mag catch so that this can run 50rd mags. I also may try a few other parts like an RS extended slide catch just for fun. The nice part about KSC is that you can fit more RS stuff then on TM's. I want to take advantage of that.

 

Share this post


Link to post
Share on other sites
Romulus, where'd you find such a beautiful G18C slide?

 

"At bit of history of the gun. The upper on this gun is an old school KSC Glock 18C slide. It has deeply engraved trades and has been bead blasted to make it silver (I have never seen a factory one of these in silver). Frankly, I haven't seen many of these slides around anywhere which makes it extra special. This slide originally belonged to ViciousV10's and is featured in many of his Glock pictures. It was then sold onto Junior who also used it extensively. Finally, I got in from Junior in a trade and I now intend to hold on to it for quite some time."

 

;)

 

FYI I also am the one who glass-bead finished the slide.

Edited by ViciousV10s

Share this post


Link to post
Share on other sites

All good things Glock come from Vicious.

 

As far as where to find another Old School 18C slide I really don't know what to tell you other than to look around the Used Forums. I just haven't seen many.

Share this post


Link to post
Share on other sites

Well, I just sold one to Junior, but it's entirely black and actually caused me problems in my G18C...I just hope he can find a good use for it.

 

Just wondering, any idea why KSC stopped making their old engraved slides and did the newer, less-realistic laser-etched slides?

Share this post


Link to post
Share on other sites

Finally finished restoring this from its crappy state.

 

DSCN1899.jpg

 

DSCN1903.jpg

 

KWA Glock G19

-Glock GTL21

-Replica G19 Slide

-Dytac Night Sights

Edited by QDRenegade

Share this post


Link to post
Share on other sites

Very nice Renegade, really diggin' that Glock. Is the GTL21 the tac light? Not too familiar with it. If so, how much would that run me to buy one? Either way, nice gun.

Edited by The Thief Lord

Share this post


Link to post
Share on other sites
Very nice Renegade, really diggin' that Glock. Is the GTL21 the tac light? Not too familiar with it. If so, how much would that run me to buy one? Either way, nice gun.

 

Yessir. Listed on Glock's official site, the GTL has three different combos with dimming dimming variants. The GTL10/11 is a single lamp. The GTL21/22 (I have the 21) is the combo lamp and red visible laser. The GTL 51/52 is Lamp, laser, IR lamp, and IR laser. The setup is great since it uses ambidexterous roll switches to turn the light/laser (or both) on and off. I believe I picked mine up for a mere $160 but the only listing on ebay has it at $255. Looks like it'd run you $225 on cheaper than dirt as well as some other similar retailers. Dayum, didnt expect this thing to appreciate so much :P

 

Its definately a step up between all the lasers I have. This and my Laser-Max Uni-Max are the best, but the Uni-Max also retails for about $150. Makes for a great low profile AEG laser though, I often forget its right by my hand!

 

And thanks! I definately like the clean look of my GLock now. I decided that I'll never paint anything I can't replace for $10 since I dont have the equipment/attention span to do it right. That said, I think its in a complete stage.

 

The following are links to photos of the GTL21. My photos dont really show it, so yeah...

 

http://www.makosecurity.com/Merchant2/grap...0001/GTL21B.jpg

http://www.makosecurity.com/Merchant2/grap...00001/GTL21.jpg

http://teamglock.com/Merchant2/graphics/00...680%20large.jpg

 

Cheers.

Edited by QDRenegade

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.