kenxin Posted February 3, 2015 Report Share Posted February 3, 2015 Soo any idea what kind of magazine is in that SAI 19 version - regular ones with an with a new baseplate or there are finally CO2 19 mags If you mean the one DJ posted, that's RS. Quote Link to post Share on other sites
NonEx Posted February 3, 2015 Report Share Posted February 3, 2015 Nah, the left one is RS. The right one is his replica airsoft one with A1A kit. I think it's just a Glock 19 gas mag with a +2 bumpber. Not sure which though, that bevel thingy on the side, can't identify what plate that is. No Glock 19 CO2 mags AFAIK. Quote Link to post Share on other sites
hitmanNo2 Posted February 3, 2015 Report Share Posted February 3, 2015 It's a Nine Ball +2 bumper. 1 Quote Link to post Share on other sites
Wynthorpe Posted February 4, 2015 Report Share Posted February 4, 2015 Think might order a set of them to go on my G17. Quote Link to post Share on other sites
Squad 701 Posted February 4, 2015 Report Share Posted February 4, 2015 I just missed the light on these photos, the room was nearly dark by the time I got to take them But anyhow, a couple of preliminary shots of an early build of a ZEV Noveske Glock 34. The final build will be radically different 9 Quote Link to post Share on other sites
icolater Posted February 4, 2015 Report Share Posted February 4, 2015 Hey squad, hope your well, love your new race gun, what changes are u making? looks great as is. That noveske flaming pig marking is so cool. Quote Link to post Share on other sites
aznriptide859 Posted February 4, 2015 Report Share Posted February 4, 2015 Holy *suitcase*, I LOVE that slide. Freak, now I need to build a G34. Quote Link to post Share on other sites
Squad 701 Posted February 4, 2015 Report Share Posted February 4, 2015 Hey squad, hope your well, love your new race gun, what changes are u making? looks great as is. That noveske flaming pig marking is so cool. Hi Icolater, It just needs to be ZEV'd up a bit RF Noveske mag-base bumper, AIP ZEV-type mag-release, GM ZEV-trigger and 5KU ZEV-type mag-well. A bit of fine tuning and it should be shooting as good or better than a stock Marui, when combined with either the UAC or GunsMod L/W BBU housing, it's extremly light. Cheers. Quote Link to post Share on other sites
wolfgeorge Posted February 4, 2015 Report Share Posted February 4, 2015 Great looking G34!Wolf 1 Quote Link to post Share on other sites
Katotaka Posted February 5, 2015 Report Share Posted February 5, 2015 I just missed the light on these photos, the room was nearly dark by the time I got to take them But anyhow, a couple of preliminary shots of an early build of a ZEV Noveske Glock 34. The final build will be radically different Hey...... well....... you may want to fill the markings in RED (http://www.enten.co.jp/Nebula-Noveske.html) Quote Link to post Share on other sites
Squad 701 Posted February 5, 2015 Report Share Posted February 5, 2015 Hey...... well....... you may want to fill the markings in RED Haha........ Yes........ I think they left that as a personal preference That example on the Enten page may have been done with Crayon or lipstick even If I do decide to colour the lettering I'll start with the easiest option Quote Link to post Share on other sites
chas Posted February 5, 2015 Report Share Posted February 5, 2015 Requesting your knowledge on WE Glocks: Can you put a G17 slide (semi only) on a G18C frame (select fire)? To be more precise: I want to buy a G18C to shoot in full auto, and sometimes swap the whole upper with a complete slide from a G34, which is semi only. These slides come complete with all internals and I was wondering whether they will work on an auto frame with no modification. Cheers! Quote Link to post Share on other sites
Danke Posted February 5, 2015 Report Share Posted February 5, 2015 I have been told no many times to the plan of crossbreeding G17s and G18s. Some pistols now like the Stark or the Guns Modify slide for the G17 have a selector switch under at the BBU assembly that lets you pick full happy. Quote Link to post Share on other sites
vilerk Posted February 5, 2015 Report Share Posted February 5, 2015 Don't know if you can put a Marui or Stark 18c BBU in a 17 slide, but you can put a WE 18c BBU in a 17 slide. To make it semi only, you just have to add a spacer to the auto sear trip lever to keep it in semi position. Quote Link to post Share on other sites
chas Posted February 5, 2015 Report Share Posted February 5, 2015 I just want to be able to switch between these: http://www.ebairsoft.com/airsoft-alum-atei-style-glock-p-7902.HTML http://www.ebairsoft.com/airsoft-alum-atei-style-slide-glock-p-7876.HTML I think I tried it a few years ago with a regular WE G17 and a WE G18C, but I cannot remember the result! Quote Link to post Share on other sites
aznriptide859 Posted February 5, 2015 Report Share Posted February 5, 2015 Whelp, for me at least, you can't put a WE G18C upper on a TM G17 lower. The trigger bar notches don't even match up. Quote Link to post Share on other sites
Wynthorpe Posted February 7, 2015 Report Share Posted February 7, 2015 First stipple job, *fruitcage*ed up first bit in top left of grip but got into it after that. 1 Quote Link to post Share on other sites
LeeCustom Posted February 8, 2015 Report Share Posted February 8, 2015 Posted on behalf of my friend, he recently had his slide/magwell hyrdo dipped and got the new Nebula Zev slide 3 Quote Link to post Share on other sites
Katotaka Posted February 9, 2015 Report Share Posted February 9, 2015 Haha........ Yes........ I think they left that as a personal preference That example on the Enten page may have been done with Crayon or lipstick even If I do decide to colour the lettering I'll start with the easiest option http://majorwilliams.blogspot.hk/2012/05/gundam-building-101-panel-line-washes.html This method is just no-brainer, fill > let dry > wipe, done! ....... and no, you may not want to use lacquer paint or acrylic paint, and not to use on unpainted plastic parts, don't ask how I know Quote Link to post Share on other sites
NonEx Posted February 9, 2015 Report Share Posted February 9, 2015 Behold, the Glock of all Glocks! HK/WE Glock 23 GEN4 GBB with full markings Ace 1 Arms Glock 19 SAI Tier 1 RMR slide kit M3 replica light Guarder Glock 19 TM style custom magazine, fitted with WE OEM flat gas route rubber (got 30-40 good shots out of one fill!) Awesome! Gonna throw in a stock WE black barrel, thread protector on there and possibly a short suppressor as well 2 Quote Link to post Share on other sites
Dj_komodo Posted February 9, 2015 Report Share Posted February 9, 2015 Awesome build!!! my g23 is in customs hands right now, hope that they release it soon :/ No stippling NonEx? I have prepared everything in my head how I want it to be. This is how my stippling is gonna be like (pictures taken from the interwebs): Quote Link to post Share on other sites
NonEx Posted February 9, 2015 Report Share Posted February 9, 2015 (edited) I am getting a Glock 19 GEN3 frame to stipple. GEN4 will be left as is. Considering getting a tan GEN4 frame as well to be able to mix things up if I feel like it BTW, mine was in customs for about a week before it was released. So it should be alright. Edited February 9, 2015 by NonEx Quote Link to post Share on other sites
Wynthorpe Posted February 9, 2015 Report Share Posted February 9, 2015 Awesome build!!! my g23 is in customs hands right now, hope that they release it soon :/ No stippling NonEx? I have prepared everything in my head how I want it to be. This is how my stippling is gonna be like (pictures taken from the interwebs): Is this stippled using a tool? Looks very uniformed yet not if you know what i mean? Quote Link to post Share on other sites
Leon Kennedy Posted February 9, 2015 Report Share Posted February 9, 2015 (edited) Is this stippled using a tool? Looks very uniformed yet not if you know what i mean? Yes, it's created typically by using a wood burning tool with a multi-pin head. There are all sorts but it's usually something shaped like the head of a nail with a texture on it. Edited February 9, 2015 by Leon Kennedy 2 Quote Link to post Share on other sites
Dj_komodo Posted February 9, 2015 Report Share Posted February 9, 2015 a whole week!? jesus *fuitcage* christ... Where did you get you frames from? I mailed Kic and they could get one from factory for 21 usd + 21 in shipping. 42 for a frame seems a bit much. I also mailed WE Asia directly and they could also ship one, still waiting for a quotation. a gen 3 frame is a lot harder to stipple than a gen4 lower, well not the stippling bit but the sanding down and shaping part... A little advice on stippling a tan frame, don't mark the lines with a pencil as the polymer melts and blends with the pencil markings :/ 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.