snowman Posted February 5, 2009 Report Share Posted February 5, 2009 Bog standard KJW P229 Cheers. Quote Link to post Share on other sites
Romulus Posted February 6, 2009 Report Share Posted February 6, 2009 My only advice to you is be very very very careful if you do anything to the grips screws. When I got one the previous owner had accidentally sheared two and when I sold it the next owner sheared one. Obviously they are pretty fragile. Cute little gun other than that though. It will be interesting to see what you think. Quote Link to post Share on other sites
snowman Posted February 6, 2009 Report Share Posted February 6, 2009 Thanks - I'll watch for that Cheers. Quote Link to post Share on other sites
Bloodsword Posted February 19, 2009 Report Share Posted February 19, 2009 Needs an eotech. Quote Link to post Share on other sites
mightyjebus Posted February 19, 2009 Report Share Posted February 19, 2009 my latest Quote Link to post Share on other sites
Gigueand Posted February 19, 2009 Report Share Posted February 19, 2009 Is that the GWS kit, Mightyjebus? Quote Link to post Share on other sites
headblockx888 Posted February 20, 2009 Report Share Posted February 20, 2009 any guide on how you did you sig552 mod? Quote Link to post Share on other sites
Pulng Posted February 20, 2009 Report Share Posted February 20, 2009 my latest [pic] [pic] Thats just what I want!! Great setup! Oh man, this is going to be costly... Quote Link to post Share on other sites
WL-Matt Posted February 20, 2009 Report Share Posted February 20, 2009 It's either the GWS or the new JP one on Ebaybanned. Quote Link to post Share on other sites
Bloodsword Posted February 21, 2009 Report Share Posted February 21, 2009 headblock, talkin to me? Quote Link to post Share on other sites
headblockx888 Posted February 22, 2009 Report Share Posted February 22, 2009 yes im talking to you Quote Link to post Share on other sites
mightyjebus Posted February 22, 2009 Report Share Posted February 22, 2009 Is that the GWS kit, Mightyjebus? yup GWS kit with JG internals. ACM eotech and G&P flip up rear sight. Mags are ACM midcaps. it's front heavy and the stock wobbles but a little bit of tape on the tube sorted that out. nice build quality on the GWS kit and pretty easy to put together. Quote Link to post Share on other sites
Bloodsword Posted February 22, 2009 Report Share Posted February 22, 2009 Actually there is no big trick involved in that system. I just removed the old stock, drilled a hole in the gear box and installed the AR-stock. Quote Link to post Share on other sites
slu Posted March 2, 2009 Report Share Posted March 2, 2009 (edited) Just got done assembling this yesterday. Mine is actually really similar to PMMJKL's with the silver barrel and chamber in a black slide and frame. I didn't opt for the other silver bits though. Coco bolo grips versus PMMJKL's (what looks like) goncalo alves. Shoots fine, and locks back on the last round on green (unlike the stock TM). I guess I wanted it to look like one of those 1911s, but had a SIG. I'll take better photos next weekend when I build up my mini lightbox. Only now do I realize I've put the wrong flag. Edited March 2, 2009 by slu Quote Link to post Share on other sites
Mainspire Posted March 2, 2009 Report Share Posted March 2, 2009 (edited) I'll let you decide which one is real steel. ˙ʇɥƃıɹ ǝɥʇ uo ǝuo ǝɥʇ :ɹǝʍsuɐ Edited March 2, 2009 by Mainspire Quote Link to post Share on other sites
Pulng Posted March 2, 2009 Report Share Posted March 2, 2009 The one on the left Quote Link to post Share on other sites
MarioCK Posted March 2, 2009 Report Share Posted March 2, 2009 nothing fancy but I just love that gun Quote Link to post Share on other sites
SamJacksonFan Posted March 5, 2009 Report Share Posted March 5, 2009 Well, the P226 seems to be the real one (the slide pin gives me a hint), but I strongly tend to say it's the P229, if it is of metal. Because as far as I know there's no KJW with markings looking that way and no P229 metal kit (otherwise it could be one of the well made Tanakas and/or an exotic rare custom metal kit). Very hard to tell, well done I like both very much. Quote Link to post Share on other sites
fiddlesticks4220 Posted March 6, 2009 Report Share Posted March 6, 2009 as an avid real sig user i can bet my money on the sig p226 being marui.(ill never forget the difference in the mags) Quote Link to post Share on other sites
fiddlesticks4220 Posted March 6, 2009 Report Share Posted March 6, 2009 as an avid real sig user i can bet my money on the sig p226 being marui.(ill never forget the difference in the mags) oh the answer is in his post upside down lol and people still got that rong Quote Link to post Share on other sites
Romulus Posted March 6, 2009 Report Share Posted March 6, 2009 That fact that the only P229/8 kit in airsoft, with engraved trades, is done by Prime and is insanely expensive and rare was a pretty clear giveaway. Nice guns though. If you didn't know what you were about you could almost mistake the P226 for real. Quote Link to post Share on other sites
Shorty-swe Posted March 6, 2009 Report Share Posted March 6, 2009 JG SIG552 - MAG 100rds midcaps, clamped two by two, fixed with electrical tape, homemade magpuls made by 1" nylonstraps - Noname LED flashlight on fakepoint lowmount with fakepoint flipcover - G&P Fakepoint reddot on ACM QD-mount - Noname tactical buttplug (vert.grip) - Homemade paracord 1-point QD sling - Madbull Noveske KX3 "Firepig" Chronoed 82m/s with 0,28g BBs wich roughly translates to around 100m/s with 0,2g. Guarder silicon rubber allied to the magical SIG-hopup gives it excellent range. Quote Link to post Share on other sites
SamJacksonFan Posted March 6, 2009 Report Share Posted March 6, 2009 That fact that the only P229/8 kit in airsoft, with engraved trades, is done by Prime and is insanely expensive and rare was a pretty clear giveaway. Thanks on the insight. I didn't know PRIME did one. I just was guessing. Do you know for which basis the kit was designed? Marui model? @ fiddlesticks4220 Nice point with the mag. Missed that. That would may be the only clear hint you can recognize the gbb from the picture. Really nice custom work. Quote Link to post Share on other sites
SamJacksonFan Posted March 6, 2009 Report Share Posted March 6, 2009 (edited) Strangely I can't edit my own post … well anyway: Got the answer to my question myself by chance. Thanks to Arniesairsoft The News on the Prime kit for Marui P226R was presented here … nice pictures: http://www.arniesairsoft.co.uk/forums/inde...howtopic=142651 And some maybe for sale out there (for the pals that have some extra $960 they don't need ): http://www.bishoen-hobby.ne.jp/pr337.htm That's definitely some hot *suitcase* I am dreaming about for years … a nice well done P228 … or a P229 unrailed is fine for me. Edited March 6, 2009 by SamJacksonFan Quote Link to post Share on other sites
fiddlesticks4220 Posted March 6, 2009 Report Share Posted March 6, 2009 (edited) Thanks on the insight. I didn't know PRIME did one. I just was guessing. Do you know for which basis the kit was designed? Marui model? @ fiddlesticks4220 Nice point with the mag. Missed that. That would may be the only clear hint you can recognize the gbb from the picture. Really nice custom work. yeah that and the finish on the 226 is not like a real sig. the kit has a flater coat. edit,i hit post 200 cool Edited March 7, 2009 by fiddlesticks4220 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.