AnotherJesus Posted May 30, 2008 Report Share Posted May 30, 2008 On the TM sig you can push the slide release mechanism to the left of the gun, push from the right hand side, and it clicks out. Dunno if that helps, seeing as you asked about the KSC. Quote Link to post Share on other sites
Porscht Posted May 31, 2008 Report Share Posted May 31, 2008 @ anotherjesus: Like as with an KJ P226. but not really skirmishabel for a safety because its naerly impossible to pull your secondary and switch safety off in a short time. And you need to hands for that. Quote Link to post Share on other sites
Weirdguy Posted June 1, 2008 Report Share Posted June 1, 2008 My friend and me were really bored before a game. Enter rape. Story behind the mag: one of the springs fell out of my MAG midcap during a game (it was about -10c and the taps keeping it in just snapped off). I managed to keep the spring but only part of it didn't get tangled. My plan is to order a drum mag and convert it using the old magazine top, but until then it is this. Feeds about 4 rounds. Quote Link to post Share on other sites
The Badger Posted June 1, 2008 Report Share Posted June 1, 2008 That - tape + Sig550 + ridiculously large scope = pure winnage. The Badger tried doing it to a g36 mag once, many good men lost their lives in the process and it still didn't work. (note to all attempting this, Cthulhu either doesn't exist, or isn't interested in human sacrifices at this time.) Quote Link to post Share on other sites
maxter Posted June 5, 2008 Report Share Posted June 5, 2008 Figured I might aswell put this question in here. Has anyone ever tried doing a "battery inside cheekpiece"-mod for the SIGs? I figured, the cheekpiece is pretty common (and VERY sexy) among the SIG-series, and I reckon it could serve as a nice battery compartment with some modifications. Anyone tried this? Quote Link to post Share on other sites
Bersy Posted June 5, 2008 Report Share Posted June 5, 2008 Hmmm yea that would be a good idea Maxter! would be interesting to see someone do a cheekpiece battery mod! Quote Link to post Share on other sites
maxter Posted June 6, 2008 Report Share Posted June 6, 2008 Also, what MOLLE mag pouches do you guys use for your SIG 550/551/552 mags? Quote Link to post Share on other sites
justin.kovacs Posted June 6, 2008 Report Share Posted June 6, 2008 Quote Link to post Share on other sites
chas Posted June 6, 2008 Report Share Posted June 6, 2008 Can anyone tell me whether the KSC P226 accepts Marui magazines? Thanks! Quote Link to post Share on other sites
Alfer Posted June 6, 2008 Report Share Posted June 6, 2008 not that i know of mate. Quote Link to post Share on other sites
Billy5150 Posted June 8, 2008 Report Share Posted June 8, 2008 Thought it was about time I put my heavily customised P226 up for the world to see, now that it is complete. Contains the following Brand New Standard TM Sig P226, Switched Chrome metal parts to give a 2 tone look. Creation Slide and Barrel kit Nine-ball Recoil Rod with Uprated Spring Complete Nine-ball Rocket Value Kit PDI 6.01 Inner Barrel Creation Rail-less Frame Uprated Hammer Spring & re-shaped Hammer Block Sights have been uprated with Tritium Inserts Grips replaced with Crimson Trace Wrap round Rubberized Grip complete with Laser Sight, complete with Stainless Hogue Hex Screws. All this Shoots at an average 370 FPS on a warm day. Billy Quote Link to post Share on other sites
pedro041484 Posted June 9, 2008 Report Share Posted June 9, 2008 my sig Quote Link to post Share on other sites
Weirdguy Posted June 9, 2008 Report Share Posted June 9, 2008 That - tape + Sig550 + ridiculously large scope = pure winnage. The Badger tried doing it to a g36 mag once, many good men lost their lives in the process and it still didn't work. (note to all attempting this, Cthulhu either doesn't exist, or isn't interested in human sacrifices at this time.) Badger, I forgot I had this image laying around, then I remembered it. This is what you want I believe: or maybe a bigger scope, and a bayonet to even things out I think all you really need though is magazines Quote Link to post Share on other sites
Romulus Posted June 9, 2008 Report Share Posted June 9, 2008 That is a very nice piece Billy5150. I'm curious about where you got the Hex Screws for the grips. I have tried RS screws (they look similar) but they didn't work for me. Is there any chance of my being able to get a set? Quote Link to post Share on other sites
STRELOK Posted June 9, 2008 Report Share Posted June 9, 2008 THE only sig rifle i realy like is the SIG 550 or the 551 the comando looks kind of *fruitcake*ed up to me. The sig 550 looks awsome with a susat. thats klike my favorate gun in STALKER Quote Link to post Share on other sites
the sniper Posted June 9, 2008 Report Share Posted June 9, 2008 Romulus since Billy5150 is being slow I will answer your question for him The Hex Screws for the grips are hogue RS screws. All that was done was the frame was tapped out to the correct size (m4 fine if I remember correctly) Quote Link to post Share on other sites
Billy5150 Posted June 10, 2008 Report Share Posted June 10, 2008 (edited) Romulus since Billy5150 is being slow I will answer your question for him The Hex Screws for the grips are hogue RS screws. All that was done was the frame was tapped out to the correct size (m4 fine if I remember correctly) Cheers Buddy. It's great when you don't even have to answer your own questions cause your tech guy does it for you. Billy Edited June 10, 2008 by Billy5150 Quote Link to post Share on other sites
hkssr20det Posted June 12, 2008 Report Share Posted June 12, 2008 Been monkeying around with a soddering iron and some spare grips: Golf Ball: Striped: Quote Link to post Share on other sites
Vercingetorix Posted June 12, 2008 Report Share Posted June 12, 2008 That sig is sooooooooooooooooo nice and classy..... Quote Link to post Share on other sites
hkssr20det Posted June 14, 2008 Report Share Posted June 14, 2008 Sort of a Herring Bone look: Quote Link to post Share on other sites
Billy5150 Posted June 14, 2008 Report Share Posted June 14, 2008 Sort of a Herring Bone look: Like the Golf Ball, but personally don't like the look of the other 2, but it's more important how they feel. Billy Quote Link to post Share on other sites
WhutJP Posted June 15, 2008 Report Share Posted June 15, 2008 My new darling arrived today. she is so very sexy. Quote Link to post Share on other sites
Romulus Posted June 16, 2008 Report Share Posted June 16, 2008 The first photo is quite cool. It doesn't look at all like the gun is plastic. Quote Link to post Share on other sites
realityknight Posted June 20, 2008 Report Share Posted June 20, 2008 quick+dirty Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.