millest Posted July 5, 2008 Report Share Posted July 5, 2008 (edited) billytehbob - ill try to get you one when i get in from work as i want to get some pics of my g36c up. for now to keep the flow heres may g36c in its most base format cheers millest Edited July 5, 2008 by millest Link to post Share on other sites
millest Posted July 5, 2008 Report Share Posted July 5, 2008 my g36 with pmag, m4 adaptor, acog red dot and zombie silencer. also showing my themold mags and TM tracer unit internals are stock apart from a system piston and piston head, considering the short barrel its spot on for range, though acuracy does suffer. time to order myself a twisted TM barrel to see if that helps with the acuracy cheers millest Link to post Share on other sites
RedScare Posted July 5, 2008 Report Share Posted July 5, 2008 http://www.rsov.com/index.php?target=produ...product_id=2074 is this drum mag any good. my google-fu has failed me. thanksies Link to post Share on other sites
billytehbob Posted July 5, 2008 Report Share Posted July 5, 2008 @millest- Wow, that looks really good with a P-Mag @Onslaught- Nice KWA G36, but I puke every time I see that large handguard Link to post Share on other sites
millest Posted July 5, 2008 Report Share Posted July 5, 2008 @millest- Wow, that looks really good with a P-Mag cheers, its looks good with the thermolds in too, ill try to get one up of it later. the pmags are nice to use and the clear window in the side really adds to the effect. redscare - i own the m4 one from dboys for my g36 (go figure, lol) and its good, that good in fact i plan on using it on my g36 dmr when i finish it! cheers millest Link to post Share on other sites
mr.m Posted July 6, 2008 Report Share Posted July 6, 2008 Again My G36, and yes, all lowcaps. I think you might need some more mags just in case you run out. Link to post Share on other sites
majwinters636 Posted July 6, 2008 Report Share Posted July 6, 2008 i like the g36K the best... im sorry but the ACOG on the g36 isnt that attractive... Link to post Share on other sites
millest Posted July 6, 2008 Report Share Posted July 6, 2008 as promised some more pics of my g36, i think any that use m4 magwells should be designated g36c4 im a geek i know. lol anyway with out further ado: on floor with thermold mag and c-mag next to it C-mag installed another C-mag picture a stand up shot the business end redscare - if your going for an m4 c-mag from dboys i can recomend them even though they are somewhat fragile but i cant say about the g36 one, though one would hope its of a similar quality. cheers millest Link to post Share on other sites
MrBlanks Posted July 7, 2008 Report Share Posted July 7, 2008 Finally! Real KSK rail? If not, tell me where to get them. Thanks. Link to post Share on other sites
demon.b Posted July 7, 2008 Report Share Posted July 7, 2008 http://www.rsov.com/index.php?target=produ...product_id=2074 is this drum mag any good. my google-fu has failed me. thanksies It looks like a copy of the Hero Arms C-mag, I have the HA mag, fed well with excell .02, but the plastic seemed brittle and the cut down G36 mag bolted to the top collapsed while I was loading it, the spring that pushes the ammo out of the drum into the feed mech is really strong and puts a lot of load on the mag when you have to hold it back while loading, I think I must have been twisting it too much or something. Link to post Share on other sites
NeoVeNoM Posted July 7, 2008 Report Share Posted July 7, 2008 I think you might need some more mags just in case you run out. Wow after 4,5 months.... . Aren't you proud you noticed. I hope it won't take you 4,5 months again to read this. Link to post Share on other sites
MDK_Marshal Posted July 7, 2008 Report Share Posted July 7, 2008 Wow after 4,5 months.... . Aren't you proud you noticed. I hope it won't take you 4,5 months again to read this. I hope he doesn't quote the pics again So as not to be spamming, here's a piccy of my new baby - JG G36c, which I've left internally stock, apart from a rewire and a MOSFET. was throwing out 320fps when I last chrono'd it, which is plenty for me. I've got an eotech I could slap on it as well, but, to be perfectly honest, I prefer the aimpoint. Dot's too feeble on the eo, and the batteries are dead Plus, it's like looking into a damned mirror Link to post Share on other sites
quepwik Posted July 8, 2008 Report Share Posted July 8, 2008 (edited) Hello This is my custom project : G36-SG1 SD Counter Sniping HK417 cross (Why not a sopmod too) HK416 or SL9 or G36 magazine H&K G36k Jing Gong Hurricane multi silencer Bipod Not sure yet for the scope, perhaps THIS ONE And i'm searching for having a KV outer barrel like this (more longer than a K) : What do you think about ? Edited July 8, 2008 by quepwik Link to post Share on other sites
Punkypink Posted July 8, 2008 Report Share Posted July 8, 2008 heres my contribution Link to post Share on other sites
ollie_ty Posted July 8, 2008 Report Share Posted July 8, 2008 Hello This is my custom project : G36-SG1 SD Counter Sniping HK417 cross (Why not a sopmod too) HK416 or SL9 or G36 magazine H&K G36k Jing Gong Hurricane multi silencer Bipod Not sure yet for the scope, perhaps THIS ONE And i'm searching for having a KV outer barrel like this (more longer than a K) : What do you think about ? I think your mock up drawing looks OUTSTANDING! If you do go through with it, Take some pics for us! Link to post Share on other sites
MrBlanks Posted July 8, 2008 Report Share Posted July 8, 2008 its fine but the pistol grip. Looks really uncomfortable. I would leave it as is. Everything is fine if you are fine with it. Link to post Share on other sites
quepwik Posted July 8, 2008 Report Share Posted July 8, 2008 (edited) My only problem is the outer barrel, i want a more longer than a K. Anybody can tell me how i can put a barrel extention to the K version after removing the flash hider ? What's i can use ? 14 - ? 14 + ? Is I can use a M4 extension like this one : found on gunner For the grip, it's an error ! This one is good : For doing this, i'm using THAT Edited July 8, 2008 by quepwik Link to post Share on other sites
JimmerUK Posted July 8, 2008 Report Share Posted July 8, 2008 Quepwik, that's a brilliant site you've found! Time for me to put mine up as I finally received my rails from eBayBanned yesterday. Taken on my phone. I think I might ditch the laser as it's only really for show, and the wire is just annoying. Link to post Share on other sites
quepwik Posted July 8, 2008 Report Share Posted July 8, 2008 I think i've found !!! I will use that : SPR Flash Hider & Silencer Is it's possible ? What do you think ? Link to post Share on other sites
ollie_ty Posted July 8, 2008 Report Share Posted July 8, 2008 Its definately possible, but I think with SPR flash hiders on a G36, you have to slightly enlarge the hole at the end of the handgrip Link to post Share on other sites
Royal-Air-Force Posted July 8, 2008 Report Share Posted July 8, 2008 (edited) Thta site wont work for me quepwik. I click anything and it come up with a "FREE" webpage describing , from what i can understand Error 404. Edit: Sorry didnt wait for ALL 700 items to load. Edit 2: Mispelled previous edit. >_< Edited July 8, 2008 by Royal-Air-Force Link to post Share on other sites
NegativeCambre Posted July 8, 2008 Report Share Posted July 8, 2008 Hello This is my custom project : G36-SG1 SD Counter Sniping HK417 cross (Why not a sopmod too) HK416 or SL9 or G36 magazine H&K G36k Jing Gong Hurricane multi silencer Bipod Not sure yet for the scope, perhaps And i'm searching for having a KV outer barrel like this (more longer than a K) : What do you think about ? Not as sleak as what you are proposing, but I've just built something mighty similar: Steve Link to post Share on other sites
mr.m Posted July 8, 2008 Report Share Posted July 8, 2008 Thats pretty nice I like the sig especially Link to post Share on other sites
quepwik Posted July 8, 2008 Report Share Posted July 8, 2008 yeah ! i like it ! for me, it's basing on a G36K, not C what's your scope please ? Link to post Share on other sites
NegativeCambre Posted July 8, 2008 Report Share Posted July 8, 2008 It is this one: http://www.leapers.com/pages/optics/5th_ge...cp-632md1-c.htm It's kind of powerful for an AEG like my JG, but like I said, I had some parts lying around and it seemed like the right thing to do... Steve Link to post Share on other sites
Recommended Posts