billytehbob Posted August 11, 2008 Report Share Posted August 11, 2008 Does anyone know how to remove the sling pin at the front of a G36 handguard? I'm failing....hard... Link to post Share on other sites
mightyjebus Posted August 11, 2008 Report Share Posted August 11, 2008 oooo nice! How did you attach the AR stock? I added an ACM M4 stock adaptor for a g36. it's doesn't fold but I was looking for it to fixed anyway. Link to post Share on other sites
ollie_ty Posted August 11, 2008 Report Share Posted August 11, 2008 Does anyone know how to remove the sling pin at the front of a G36 handguard? I'm failing....hard... Where the pin sits, there should be like a sliver of metal covering it. Push down on the raised part of that, and pull the pin out. Hope I explained that right! Link to post Share on other sites
SniperSidd Posted August 11, 2008 Report Share Posted August 11, 2008 Update to Elvira: KA L500 laser added http://xs330.xs.to/xs330/08320/elvira02528.jpg Thats one sexy gun, its almost as sexy as you Link to post Share on other sites
ollywilson29 Posted August 11, 2008 Report Share Posted August 11, 2008 I want a G36c a little bit more with every photo of one I see... Link to post Share on other sites
billytehbob Posted August 11, 2008 Report Share Posted August 11, 2008 Where the pin sits, there should be like a sliver of metal covering it. Push down on the raised part of that, and pull the pin out. Hope I explained that right! Thanks! That's exactly what I needed to do Link to post Share on other sites
billytehbob Posted August 17, 2008 Report Share Posted August 17, 2008 Sorry for the Double Post, but in return, a picture. Link to post Share on other sites
Sturmjager Posted August 18, 2008 Report Share Posted August 18, 2008 my work in progress G36C SO I'm not the biggest of fan of M4 stocks on anything but an M4, but this is one good looking rifle that has an M4 stock. Good work! Link to post Share on other sites
jez Posted August 18, 2008 Report Share Posted August 18, 2008 My new G36, using 3 mags as its cheaper than a bipod lol Link to post Share on other sites
ollie_ty Posted August 20, 2008 Report Share Posted August 20, 2008 To anyone with the CA RAS + Barrel assembly; Can I unscrew the barrel, and replace it with my full length G36 conversion? Link to post Share on other sites
gunnermaniac Posted August 20, 2008 Report Share Posted August 20, 2008 Nice setup jez! Link to post Share on other sites
jez Posted August 20, 2008 Report Share Posted August 20, 2008 Nice setup jez! Thankyou, its my first G36 and my first JG and i must say its most likly one of the best i have owned, very solid build and feels really good Link to post Share on other sites
validtumoralarm Posted August 21, 2008 Report Share Posted August 21, 2008 Quick picture request... Can someone please show a photo of a full length CA G36 with the CA G36K RAS? I've seen it done in real steel and it looked pretty cool, but I want to see how well the airsoft version works. Link to post Share on other sites
[-=O=-]^{Woozie} Posted August 21, 2008 Report Share Posted August 21, 2008 Link to post Share on other sites
Laxplayer19x93 Posted August 21, 2008 Report Share Posted August 21, 2008 (edited) This thread makes me sad that I sold my G36c Edited August 21, 2008 by Laxplayer19x93 Link to post Share on other sites
[-=O=-]^{Woozie} Posted August 21, 2008 Report Share Posted August 21, 2008 easy solution, get another one ;D Link to post Share on other sites
Pkekyo-Nor Posted August 25, 2008 Report Share Posted August 25, 2008 Current state of affairs... I consider the project completed Next: MG36 350FPS MG G36S 450FPS semi-sniper I love this stuff Link to post Share on other sites
Marginal Posted August 25, 2008 Report Share Posted August 25, 2008 (edited) This thread makes me sad that I sold my G36c Same here. But I had too many accessories for it and I felt it looked too toyish. Anyways, I have 10 STAR mid-caps wandering around here and if I had to buy a G36 again, it would be the KWA KG36C with a scope-integrated top rail and a paintjob like mightyjebus did. Nothing more, nothing less. Edited August 25, 2008 by Marginal Link to post Share on other sites
Panzergraf Posted August 25, 2008 Report Share Posted August 25, 2008 My G36V, august 08 edition: Parts list: (not including stuff inside) Army Code G36 Receiver Army Code G36 one piece barrel H&K G36 foregrip G&P G36 bipod G&P G36V stock STAR G36 rail, cut down to look like a G36V rail EOTech 551 Galaxy MP7 flip up BUIS Chinese 3x aimpoint magnifier, borrowed from a friend for the occation Inspiration (real steel): http://www.gun-world.net/german/hk/g36/no_g36kv15.jpg G36V: http://img135.imageshack.us/img135/4549/idzes1ey3kg7.jpg To do: H&K G36 handguard with attachment points for rails on the side. My own EOTech 3x magnifier A real G36V or KSK rail The new SRC V stock looks better than the G&P, I hope it becomes available separately. It was based on a CA36E, not that it matters as the trigger and motor cage are the only stock parts left. Link to post Share on other sites
0nslaught Posted August 26, 2008 Report Share Posted August 26, 2008 im sure thats a typo, but just to be safe, thats a 552 do you have any more pics of the 36c rail? i always wanted the KSK carry handle but it was either too expensive or hard to find. did you just dremel off bits of it until it was straight? Link to post Share on other sites
talon_0315 Posted August 26, 2008 Report Share Posted August 26, 2008 Current state of affairs... I consider the project completed Cue the Finding Nemo seagulls please. Mine, mine, mine. Link to post Share on other sites
Jsres Posted August 26, 2008 Report Share Posted August 26, 2008 current G36 in most recent change. will most likely stay in this configuration changed the magwell from the PPA Magwell to the standard TM G36 Magwell, added the G36K Flash hider, added Rico Beta Light my cqb loadout Blackhawk! Molle Vest (Husky Version) Fox Racing Carbon Fiber knuckle gloves TM G36C w/ 4x G36 Hicaps KWA G23F w/ 5x Glock 50 Rd Hicaps (soon to be 7) Link to post Share on other sites
Fin Posted August 26, 2008 Report Share Posted August 26, 2008 Got a few questions for finishing my G36 (which will be here in a few days) 1. Is there a grip with the S E F markings instead of the bullet ones in production/planned anywhere (searched but found nothing)? 2. Has anybody had any experience using dboy 50 rounders in a CA36? 3. Anybody know a (cheap) source of the star dual optics sight? Cheers guys Link to post Share on other sites
ollie_ty Posted August 26, 2008 Report Share Posted August 26, 2008 (edited) Got a few questions for finishing my G36 (which will be here in a few days) 1. Is there a grip with the S E F markings instead of the bullet ones in production/planned anywhere (searched but found nothing)? 2. Has anybody had any experience using dboy 50 rounders in a CA36? 3. Anybody know a (cheap) source of the star dual optics sight? Cheers guys 1. No, although i'm sure QuiN customised one to fit his G36 2.Not sure 3. I think they've discontinued them now, good luck finding one though ( And if you find a shop that sells them cheap, PM me with a link! ) Edited August 26, 2008 by ollie_ty Link to post Share on other sites
Panzergraf Posted August 26, 2008 Report Share Posted August 26, 2008 (edited) im sure thats a typo, but just to be safe, thats a 552 do you have any more pics of the 36c rail? i always wanted the KSK carry handle but it was either too expensive or hard to find. did you just dremel off bits of it until it was straight? It's a typo (more of a brain fart, really), yes. It's actually a 512 I dremeled off bits, like the tabs that extend down at the middle fo the rail, and some of the material towards the rear of it. Like so: Edited August 26, 2008 by Panzergraf Link to post Share on other sites
Recommended Posts