tr1gg3r_h4ppy Posted January 30, 2008 Report Share Posted January 30, 2008 Hey guys, After messing around quite a bit with a Ver. 2 G3SAS TM gearbox. I've noticed that the shells tension seems to cause the gears to bind up. Is this normal or do I have bad shims? or bad bushings? or did I do a bad job shimming. Thanks, Trigg Link to post Share on other sites
UrPeaceKeeper Posted January 30, 2008 Report Share Posted January 30, 2008 Hey guys, After messing around quite a bit with a Ver. 2 G3SAS TM gearbox. I've noticed that the shells tension seems to cause the gears to bind up. Is this normal or do I have bad shims? or bad bushings? or did I do a bad job shimming. Thanks, Trigg You should be shimming the gearbox so that when the gearbox is fully tightened down the gears dont bind. This is why they suggest when you shim that you shim each gear then tighten the gearbox all the way down and test it there. hope that helps UPK Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.