Mobius Strip Posted June 9, 2012 Report Share Posted June 9, 2012 Western Arms SCW2-3 SV Infinity, Snake Hi Cap WA Snake Hi Cap donor WA Stainless hammer, sear and disconnector Prime SV Infinity slide, sides polished. WA fibre re-inforced plastic parts. Internal parts all checked, changed, smoothed and refitted where necessary. Interesting to note that this donor came with SCW2 lowers and SCW3 uppers as standard. Although one could argue that SCW2 lowers are easier to work with, the truth for this choice is that WA chose to fit their stainless hammer, sear and disconnector to this pistol and they jointly are specific to the SCW2 range. In this 'later' pistol WA have fitted their fibre reinforced plastic parts also. Better for strength and no need to fit PGC mags lips for reliable feeding. I'm still undecided as to whether or not to leave the gold barrel and black trigger or swap both to silver. Quote Link to post Share on other sites
wolfgeorge Posted June 11, 2012 Report Share Posted June 11, 2012 It's fantastic... I'm a fan of gold barrels so I'd advice you to keep it and change the trigger with an Infinity adjustable trigger. Wolf Quote Link to post Share on other sites
lazyshark Posted June 11, 2012 Report Share Posted June 11, 2012 So clean. I say keep the gold barrel as well and change the trigger to silver. Are the stainless WA hammer sets machined? Quote Link to post Share on other sites
Mobius Strip Posted June 12, 2012 Report Share Posted June 12, 2012 Thanks for the input gents. The stainless WA hammer set is indeed machined, but not quite up to the standard of the CP steel hammer and sear sets that I've had. Quote Link to post Share on other sites
Arioch Posted June 15, 2012 Report Share Posted June 15, 2012 My 2011's KJW's Including Limcat RS Pistol Lights/TM's WA 3x Prokiller's 2x WA Para Ords, Custom Infinty and Custom Infinity 4.3 Regards, Arioch Quote Link to post Share on other sites
lazyshark Posted June 16, 2012 Report Share Posted June 16, 2012 Digging the non railed baby hi cap Quote Link to post Share on other sites
MrManiac Posted June 18, 2012 Report Share Posted June 18, 2012 This is my take on the SV Masterpiece IMM IPSC pistol.... All standard TM internals. The rear sight fitment has been plated over and an internal compensator fitted to a standard TM 4.3 barrel. The slide muzzle has been cut sloped so it will fit in the specified size box (225mm ? x 150mm x 45mm high) as required by the new IPSC regulations. Im still waiting on an experimental scope mount (my customizing of a Glock mount to the under side of the RIS) and a Panorama red dot. Quote Link to post Share on other sites
heroshark Posted June 18, 2012 Report Share Posted June 18, 2012 Looks good so far bud. I've been polishing my rail today. Quote Link to post Share on other sites
Mobius Strip Posted June 18, 2012 Report Share Posted June 18, 2012 (edited) Mr Maniac, ref that Infinity: It was kooky looking when I first saw it, and it's kooky looking now - but lovely to see an airsoft version and I can't wait for the finished item. Keep up the good (and interesting) work Edited June 18, 2012 by Mobius Strip Quote Link to post Share on other sites
MrManiac Posted June 20, 2012 Report Share Posted June 20, 2012 Thanks 'Mobius' and yes it is 'kooky' I have to agree but it just grabbed my attention. The Glock scope mount has arrived now so im off to start grinding and filing, the scope mount I mean Will post more piccies when its finished. Loving the 'Brazzo custom' Hicapa 'heroshark' with the long barrel, nice Quote Link to post Share on other sites
wolfgeorge Posted June 21, 2012 Report Share Posted June 21, 2012 Very nice IMM Masterpiece... I'd also like to see an airsoft version of it... Here's a picture of the RS just for inspiration.. Keep up the good work! Wolf Quote Link to post Share on other sites
mrcheetos Posted June 29, 2012 Report Share Posted June 29, 2012 (edited) So, from what I can gather, this thread is for any double stack/hi-capa based 1911 style gun? If I'm wrong, let me know, and I can move this to the 1911 thread. Started out as a KP08, but I decided I hated the squared slide and how hard it was to manipulate the snubby controls, so I canabilized my old KJW and transplanted the slide, catch and safety onto the grip. Can anyone recommend some good replacement sights? I've got my eye on a few, but I'd like to know if there are any underrated gems out there. I'm also looking to replace the mag release with a low profile one, all I can find are extended buttons. Anyone have a source on what I'm looking for? Thank you. Edited June 29, 2012 by mrcheetos Quote Link to post Share on other sites
MrManiac Posted August 3, 2012 Report Share Posted August 3, 2012 Have just installed a scope on my SV Masterpiece. Its not run of the mill as you can see, its a customized Glock 17 scope mount. Seems to work ok but if this were 'real steel' the barrel vents are not that well placed, as it would blow the mount off lol! And here's two of my 'Race guns' at rest...the Executive now has a WE mag funnel added. Quote Link to post Share on other sites
Kuakuachu Posted August 3, 2012 Report Share Posted August 3, 2012 Seems like a good place to ask, please delete if not. With regards to the TM extreme, is it just the blow back unit that makes it fire full auto? so if I wanted to make it semi only I could just change the BBU for a regular one? Loving some of the 2011's on here Quote Link to post Share on other sites
wolfgeorge Posted August 3, 2012 Report Share Posted August 3, 2012 No it's the sear and disconector for FA function, I don't know how's done but I think I've seen a video telling how to do it. MrManiac that is soo sweet, it came out very nice. Wolf Quote Link to post Share on other sites
Kuakuachu Posted August 3, 2012 Report Share Posted August 3, 2012 OK thanks, bit of a bummer Quote Link to post Share on other sites
MrManiac Posted August 6, 2012 Report Share Posted August 6, 2012 MrManiac that is soo sweet, it came out very nice. Wolf Thank you I have tested her now and she fires exceptionally crisp, tight and can handle fast shooting (as fast as you can pull the tigger!). Its the accuracy that gets me for such a short barrel length (less than 2 inches!!) Over a distance of 125ft it can hit a dinner plate size area with ease The only draw back is the kick causing the scopes red dot to shift excessively off target between shots Quote Link to post Share on other sites
mimesis Posted August 7, 2012 Report Share Posted August 7, 2012 (edited) Paint job on previously posted 5.1 New build! Slightly commanderish 4.3. No donor gun! (Didn't I already say "never again"?) EDIT: trigger by AIP. Edited August 7, 2012 by mimesis Quote Link to post Share on other sites
WhiteHawksan Posted August 7, 2012 Report Share Posted August 7, 2012 what trigger is that mim? Locelly looking build there. Quote Link to post Share on other sites
MrManiac Posted August 10, 2012 Report Share Posted August 10, 2012 Paint job on previously posted 5.1 New build! Slightly commanderish 4.3. No donor gun! (Didn't I already say "never again"?) EDIT: trigger by AIP. Nice guns there 'mimesis' Loving the 5.1 paint finish and colours. The 4.3 looks very agressive, like it. Quote Link to post Share on other sites
mrcheetos Posted August 28, 2012 Report Share Posted August 28, 2012 I just need to find a combination of a mag and slide catch, safety and hammer that I like now. As my first "semi-custom" project, I've gained a lot of respect for you guys who build pistols from scratch. I also want to know what job you have, and if they're hiring. The base gun is a KJW KP-08. Quote Link to post Share on other sites
wolfgeorge Posted September 29, 2012 Report Share Posted September 29, 2012 This will be my skirmish pistol from now on... It's the loudest pistol! Everything stock except the SD V12 slide, SD V12 steel outer barrel, SD Hybrid steel chamber and night sights. Wolf Quote Link to post Share on other sites
Short Stack Posted September 30, 2012 Report Share Posted September 30, 2012 Oh my gosh. Quote Link to post Share on other sites
wolfgeorge Posted September 30, 2012 Report Share Posted September 30, 2012 This is my other one... It's not finished yet though. Wolf Quote Link to post Share on other sites
kenxin Posted September 30, 2012 Report Share Posted September 30, 2012 ooooh infinity IMM....niiice. One thing strikes me as odd however.... no slide racker? Question: is it AS? prohandgun? prog4? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.