BigAl Posted November 3, 2019 Report Share Posted November 3, 2019 On 10/30/2019 at 10:06 AM, Mike_West said: Airsoft, using that old TM Uzi to M4 mag conversion. I have one at home too. Mag is different to the TM Uzi mag, I have a G&P Colt 635 infront of me with 7 Uzi mags. Also have a slot in plastic adaptor and mag, doesn't look like that one either. It looks like a polymer mage with two clip together slots like G36 mags? Quote Link to post Share on other sites
Hedganian Posted November 3, 2019 Report Share Posted November 3, 2019 Looks similar to these straight MP5 mags:https://www.herooutdoors.com/angel-custom-ap10-9mm-airsoft-aeg-m4-m16-to-mp5-adapter-conversion-kit-w-high-cap-magazine-1/ 1 Quote Link to post Share on other sites
Mike_West Posted November 4, 2019 Report Share Posted November 4, 2019 Yeah, that'd be the one. I found it while searching for an airsoft AUG 9mm conversion. 1 Quote Link to post Share on other sites
BigAl Posted November 8, 2019 Report Share Posted November 8, 2019 Well I reckon i'll be having one of those, an use same mas in my ar's and MP5's then. Make a modern version of my 635. Quote Link to post Share on other sites
Hedganian Posted November 8, 2019 Report Share Posted November 8, 2019 I'm planning to use them in my 9mm G36SD build. 1 Quote Link to post Share on other sites
renegadecow Posted December 17, 2019 Report Share Posted December 17, 2019 Made a Ruby pistol holster for my French kit. No airsoft Ruby though so Detonics takes its place 5 Quote Link to post Share on other sites
Murdoc Posted February 22, 2020 Report Share Posted February 22, 2020 (edited) Integrated "webbing" of backpack, chest rig, and belt rig: Made by Little Needle from ITW plastic parts, and 1000D cordura. It incorporates ideas/experience of my past 12 years of airsoft. Edited February 22, 2020 by Murdoc 2 Quote Link to post Share on other sites
Isamu Posted February 22, 2020 Report Share Posted February 22, 2020 2 hours ago, Murdoc said: Integrated "webbing" of backpack, chest rig, and belt rig: Made by Little Needle from ITW plastic parts, and 1000D cordura. It incorporates ideas/experience of my past 12 years of airsoft. I have been following them for some time in facebook and their work looks pretty good, what are your experiences with them quality/price wise? =) Quote Link to post Share on other sites
Murdoc Posted February 23, 2020 Report Share Posted February 23, 2020 Good price! Quality: This was the most difficult they made (extreme difficult bacpack), however it needed a lot of personal discussion... Pouches etc. are easier to discuss /PM. I think the products are too good for airsoft usage. (I have only experience with russian webbing products, Fox Tactical and Arktis. Arktis is the best, and still a bit lower quality than LN). They like when customer is sure what he (she) wants... I planned my ones on paper. Quote Link to post Share on other sites
Isamu Posted February 23, 2020 Report Share Posted February 23, 2020 27 minutes ago, Murdoc said: Good price! Quality: This was the most difficult they made (extreme difficult bacpack), however it needed a lot of personal discussion... Pouches etc. are easier to discuss /PM. I think the products are too good for airsoft usage. (I have only experience with russian webbing products, Fox Tactical and Arktis. Arktis is the best, and still a bit lower quality than LN). They like when customer is sure what he (she) wants... I planned my ones on paper. Thanks man! that backpack looks TERRIFIC! will contact them for my next project =D 1 Quote Link to post Share on other sites
Murdoc Posted February 23, 2020 Report Share Posted February 23, 2020 (edited) The chest rig is also working as mini chest rig: To avoid re-adjusting the straps, I will order a pair of padded "X" harness for it, with 4 "mother side" of the 1 inch ITW buckles... but what color? Coyote? Foliage? OD? Balck? (I will repaint the font part of the FAST "pouches" in the same color.) Edited February 23, 2020 by Murdoc Quote Link to post Share on other sites
renegadecow Posted March 31, 2020 Report Share Posted March 31, 2020 Made something for the reenactors (it's a wallet) 2 Quote Link to post Share on other sites
Lowprofile Posted June 17, 2020 Report Share Posted June 17, 2020 Just finished up this leather pancake holster for my series 70. Stitch work is pretty rough (and not a proper saddle stitch) but I'm really happy with it considering its the first leather work I've done. 9 Quote Link to post Share on other sites
Ivan le Fou Posted September 27, 2020 Report Share Posted September 27, 2020 (edited) I tried making an ADM:Or, at least, something that can be misconstrued as something looking like an ADM. Edited September 27, 2020 by Ivan le Fou Quote Link to post Share on other sites
TheFull9 Posted November 19, 2020 Report Share Posted November 19, 2020 Not my work but I've had a few of these made in different camos over the past couple of years. Have been talking with a couple of different companies, hopefully within a few months they'll actually be available and in just about every camo that you can get gear made in. 4 Quote Link to post Share on other sites
Erka92 Posted February 15, 2021 Report Share Posted February 15, 2021 Awesome work with the panels! Can't wait to get my hands on some in AOR1 and AOR2. Apologies if the question is in the wrong section. Looking for help with finding a tailor in the EU, that modifies gear. I've got a plate carrier that i want to do some minor modifications on. Reasons for keeping inside EU is because of customs. Have found some guys in UK/US but the toll would be real pricy. 1 Quote Link to post Share on other sites
Skarclaw Posted February 23, 2021 Report Share Posted February 23, 2021 On 2/15/2021 at 11:47 AM, Erka92 said: Reasons for keeping inside EU is because of customs. Have found some guys in UK/US but the toll would be real pricy. I have had positive experience with Teemu Custom (France) and MCX custom gear (Italy), though I will caveat by saying this was "off the shelf", albeit made to order, rather then anything bespoke. 1 Quote Link to post Share on other sites
Murdoc Posted February 27, 2021 Report Share Posted February 27, 2021 On 2/15/2021 at 12:47 PM, Erka92 said: Looking for help with finding a tailor in the EU, that modifies gear. Little Needle /Facebook, but minimum order is ~55 EURO 1 Quote Link to post Share on other sites
gisburn20 Posted October 21, 2021 Report Share Posted October 21, 2021 A few quick mods, not very exciting or complicated but quality of life mods.Modified the lid of an Osprey AP grenade pouch to fit a Dynatex timed grenade.Modified a poundland phone holder into a molle mounted carrier for .209 primers. 1 Quote Link to post Share on other sites
Wingmann Posted January 21, 2022 Report Share Posted January 21, 2022 Make this into this 2 Quote Link to post Share on other sites
Ivan le Fou Posted January 24, 2022 Report Share Posted January 24, 2022 What did you use? Sand paper then walnut masonry stain? Quote Link to post Share on other sites
Wingmann Posted January 24, 2022 Report Share Posted January 24, 2022 Bitumen of Judea applied by scumbling (I had to look that up) strokes with a brush. Then they were sprayed with matt varnish. 1 Quote Link to post Share on other sites
Murdoc Posted December 4, 2022 Report Share Posted December 4, 2022 6 cell G3/FAL Recce rig made from dutch DPM sleeping bag cover (I dyed black to mimic the black camo cream effect). Together with BOP SF belt rig: 2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.