Jump to content

Dboy M4A1 AEG modify to SP GBB


happy.al

Recommended Posts

If Justin can custom fit these internals into other metal bodies this will definitely be very cool for those of us that actually like using gas rifles.

 

I personally wouldnt want one of these simply because i dont like the quality of the metal on the dboyis guns.

 

If i could take a VFC 416 or some of the better finished Guarder/G&P/King Arms receivers out there and have justin convert them i would be one heck of a happy customer.

Link to post
Share on other sites
  • Replies 53
  • Created
  • Last Reply
I bet he can, but it must be easyer for him and cheaper for us that he makes them from dboyi as in bulk.

 

I agree, id happily pay a premium to receive a custom piece of work.

 

Say for example, i send him a VFC body to be modified, he could just bill me for cost of materials and labor to modify my existing body to fit the escort internals.

Link to post
Share on other sites

I started thinking up some ideas after seeing Airsoft NY's escort RPD powerd by MP5 internals, and a G36 could be doable with an internal steel frame attached to the barrel and stock mount, this would again hold the blowback system etc.

 

I don't have the knowledge, skill or tools to make this though, but I know my team mates and I could pay good money for something like that, as could probably many others.

Link to post
Share on other sites
Or even other guns than AR-15/10 series.

I'd imagine a heavily modified MP5 engine could fit into both a G3 and a G36.

 

i asked that too. i would DEFINITELY be interested in an AK conversion assuming the price is half sensible (which it does appear to be for this)

Link to post
Share on other sites

For pure durability, I would like to have the internals installed in the Madbull CNC receiver sets that are on airsoft-news, or a madbull lower and Dytac Vltor upper. The dytac is made to fit G&P lowers, dboys lowers are G&P copies? So it should be possible.

Link to post
Share on other sites

Picture Update, there will be a Video soon.

 

Price is now fixed at US$850 and Justin is taking orders for the DBoy's version now.

 

23.jpg

 

33.jpg

 

13.jpg

 

42.jpg

 

52.jpg

 

72.jpg

 

82.jpg

 

 

Justin says that he can use any metal bodies M4/16 you like, the price will of course change depending of what body is used. He can also do the mod on any existing M4/M16 you have, but will require the gun to be sent to HK to Justin for the mod to be done.

 

Please PM me if you have any questions.

 

 

Link to post
Share on other sites

Anybody know the safe PSI level for one of Justin's guns? Also, if he would be willing into modding recoil weights as well as other devices to increase the 'recoil'.

 

Compressed air is as cheap as hell, and I wouldn't mind paying the 3$ for the thousands of shots i'd get from it.

Link to post
Share on other sites
Anybody know the safe PSI level for one of Justin's guns? Also, if he would be willing into modding recoil weights as well as other devices to increase the 'recoil'.

 

Compressed air is as cheap as hell, and I wouldn't mind paying the 3$ for the thousands of shots i'd get from it.

 

for Justin guns - no. There was no 'Justin guns' yet - this is the first one :D

But Spare parts for SP made by Justin capable to run at 160PSI with no problem.

 

This gun at 75PSI shot coke can thru 2 sides.

Link to post
Share on other sites
In the vids, he's only running it at ~75psi. Most upgraded SPs are run in the 120-140psi range. Most stock SPs are run around 100-110psi.

 

Escorts kick a lot harder at higher pressures, yeah.

My reg once crept up to ~200psi (I was a noob and had poured oil in the output hole of my reg) and the kick of my Shoei was just brutal.

At ~120 it's still substantial, but not quite enough to give me a brain damage :P

75psi is fairly low though, do normal SP's even cycle at that pressure?

If not, then props to Justin for pulling that off.

Link to post
Share on other sites
75psi is fairly low though, do normal SP's even cycle at that pressure?

If not, then props to Justin for pulling that off.

Honestly never tried SPs that low. SPs probably do, but only will do FA since the bolt won't travel back far enough in semi-auto selector position to trip the cutoff lever.

 

I had the question out to him how he was getting 350-370fps (via coke can test) on that kind of pressure, and he wasn't sure. Stated he wants to get another gauge to ensure that reading in the pic was correct. Needs to get a chrono too. ;)

Link to post
Share on other sites

Justin has worked out all the quirks and now has a fully working model ready for sale, and just look at the specs, it’s very encouraging and at such a great price. Justin also reports that the blowback effect is on par with a Sun Projects rifle, which I know you don’t get the sense of that on the videos that have been posted.

 

For full details from the man himself, check out this link here:

 

http://www.classicairsoft.org/forum/viewto...=67&t=10018

 

Link to post
Share on other sites
  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.