lewis hiscock Posted July 19, 2008 Report Share Posted July 19, 2008 roscoedillan i have that exact same grip and im trying to install it on an ICS m4 but it wont seem to go on all the way (there is a 2-3mm gap where it meets the reciever. is ther some special way to fit it or do i need to modify it to get it to fit? Link to post Share on other sites
Fuser Posted July 19, 2008 Report Share Posted July 19, 2008 (edited) hkssr20det, nice one. Somehow I still prefer the all Vltor look with the E-mod stock but the Magpul one still works. Here's mine with the older stock and with VIS-2 :- http://www.tkoverkill.com/gallery/VISWholeKitted.jpg That looks fantastic. Well, I just finished my gun. And as luck would have it, my camera is shot. So I won't be able to take any pictures, unless I can borrow my friend's camera. Here's a parts list, though. Internals (WGC Custom): - G&P 7mm Reinforced Gearbox - Reinforced Polycarbonate Piston - Bearing Spring Guide - Prometheus 6.03 EG inner barrel - Deans wired Externals: - G&P M4A1 RIS Base / Colt engraved lower receiver - G&P Crane Stock - G&P Steel Mk18 Mod0 10.5" outer barrel - DyTac VLTOR MUR-1A upper receiver - Daniel Defense FF AR-15 Lite Rail 9.0 - King Arms low-profile gas block - Magpul MIAD - Magpul/DD ladder covers - Magpul trigger guard - Guarder LM&T BUIS - Guarder Vortex flash hider - Lewis Machine & Tool fixed front sight - VFC QD Sling Mount So...use your imagination Edited July 19, 2008 by Render Link to post Share on other sites
Chevieblazer Posted July 19, 2008 Report Share Posted July 19, 2008 hkssr20det, nice one. Somehow I still prefer the all Vltor look with the E-mod stock but the Magpul one still works. Here's mine with the older stock and with VIS-2 :- Oh, that is soo sick! i love it! is that the Dytac VIS? Link to post Share on other sites
WatZ Posted July 20, 2008 Report Share Posted July 20, 2008 Sheriff m16 Link to post Share on other sites
AnakChan Posted July 20, 2008 Report Share Posted July 20, 2008 That looks fantastic. Well, I just finished my gun. And as luck would have it, my camera is shot. So I won't be able to take any pictures, unless I can borrow my friend's camera. Here's a parts list, though. [snip!] - DyTac VLTOR MUR-1A upper receiver - Daniel Defense FF AR-15 Lite Rail 9.0 [snip!] So...use your imagination Oh I'm dreaming how this combo looks like! Is the DD with the Bolt Up System? Drool! I've got the Dytac MUR too but the CASV covered its beauty. Oh, that is soo sick! i love it! is that the Dytac VIS? As such I switched away from the CASV/MUR to the VIS-2, so yup it's the Dytac one. Bought it immediately after seeing it announced in the Airsoft News subforums! Link to post Share on other sites
BaBaBooey Posted July 20, 2008 Report Share Posted July 20, 2008 Sheriff m16 Wow, that's nice. Those are the ones with the full metal receivers right? That's one rare piece...what do the internals look like? I've never seen one in person. I was told it's very similar to the YE blowback design or is it BV? Link to post Share on other sites
whosloosin92 Posted July 20, 2008 Report Share Posted July 20, 2008 It's a BV operated gun. They use Marushin model gun metal bodies. Link to post Share on other sites
BaBaBooey Posted July 20, 2008 Report Share Posted July 20, 2008 It's a BV operated gun. They use Marushin model gun metal bodies. I see, I never knew that...good to know. I always thought they were Zeke/Hobby Fix M16's. Regardless, that's one collectible piece you have there! Link to post Share on other sites
Shriven Posted July 20, 2008 Report Share Posted July 20, 2008 (edited) She doesn't work just yet, not 100% sure why... gears/motor are grinding, so I'm gonna do some motor adjustment and if that doesn't work, it's new GB shell time me thinks. She's also getting a MIAD and that vicious nutter ###### flash hider from WGC.. EDIT: I do realise there's no trigger guard... gotta buy a new one, cos I can't get it off the original gun. It used to be a JG HK416. Edited July 20, 2008 by Shriven Link to post Share on other sites
F1amez Posted July 20, 2008 Report Share Posted July 20, 2008 My brothers M4A1 Link to post Share on other sites
Roecar Posted July 20, 2008 Report Share Posted July 20, 2008 Some minor updates on my Noveske custom such as a replica LaRue M68 mount and my second custom Noveske project... Replica LaRue that I think is ACM or B2 Something of a mid length Noveske, I want to replace the MRF-CX with a 10" MRF by King Arms. This LaRue mount is a replica made by KA. Link to post Share on other sites
hugh_b Posted July 20, 2008 Report Share Posted July 20, 2008 my ca m15a4, received it and upgraded it with the following: prometheus cylinder prometheus cylinder head prometheus air nozzle prometheus bearings prometheus spring guide prometheus hop rubber and nib (soft) prometheus tight-bore 6.03 barrel guarder m100 spring guarder piston guarder infinite torque motor guarder tappet plate dragon red eotech d-boys buis kwa stock tube kwa stock (not pictured) Link to post Share on other sites
evansy Posted July 20, 2008 Report Share Posted July 20, 2008 http://i237.photobucket.com/albums/ff234/S...89/pose3012.jpg http://i237.photobucket.com/albums/ff234/S...89/pose3013.jpg http://i237.photobucket.com/albums/ff234/S...89/pose3014.jpg http://i237.photobucket.com/albums/ff234/S...89/pose3015.jpg She doesn't work just yet, not 100% sure why... gears/motor are grinding, so I'm gonna do some motor adjustment and if that doesn't work, it's new GB shell time me thinks. She's also getting a MIAD and that vicious nutter ###### flash hider from WGC.. http://www.wgcshop.com/WGC_Shop/images/ka_fh_28_m.jpg EDIT: I do realise there's no trigger guard... gotta buy a new one, cos I can't get it off the original gun. It used to be a JG HK416. Very nice. Be careful with that flash hider tho, you could have someones eye out If your getting a miad why not get the new style one with the removable sections as one of those has a trigger guard built in. Link to post Share on other sites
masakarijoe Posted July 20, 2008 Report Share Posted July 20, 2008 ^ such cool armalites above!!! lovuing them all. very unique. i do approve -Joe Link to post Share on other sites
kaptenn Posted July 20, 2008 Report Share Posted July 20, 2008 What kind of problems would I get installing a G&P A1 body kit on a JG m16a3, cause I presume I would get at least some? Thanks. Link to post Share on other sites
masakarijoe Posted July 20, 2008 Report Share Posted July 20, 2008 shouldnt get any... -Joe Link to post Share on other sites
evansy Posted July 21, 2008 Report Share Posted July 21, 2008 What kind of problems would I get installing a G&P A1 body kit on a JG m16a3, cause I presume I would get at least some? Thanks. You might get a problem with the delta ring not fitting but if you get a g&p a1 front set too then you wont get that problem. Link to post Share on other sites
CSI304 Posted July 21, 2008 Report Share Posted July 21, 2008 my current primary Link to post Share on other sites
Spiderpig Posted July 21, 2008 Report Share Posted July 21, 2008 Am I the only one who cant stand those noveske thingys? Link to post Share on other sites
evansy Posted July 21, 2008 Report Share Posted July 21, 2008 The Zombie Killer and Widow Maker I've just finished putting the bottom one together (just has a few final touches needed) and added a troy style rear sight to the top one. All that needs now is a Vltor style front sight. Link to post Share on other sites
STUNTMAN Posted July 21, 2008 Report Share Posted July 21, 2008 Mine ICS M4A1 "ODA": ... and PTW from Systema: STUNTMAN Link to post Share on other sites
niko.90 Posted July 21, 2008 Report Share Posted July 21, 2008 Am I the only one who cant stand those noveske thingys? No, you're not alone. Link to post Share on other sites
Recommended Posts