Snigel Posted April 9, 2009 Report Share Posted April 9, 2009 (edited) GRIM, I hate to say it but that looks kinda good Been working a bit om my AKMS to give it a more worn look. Refinished the wood too. For those who wonder about the DM AK's, they're really nice Edited April 9, 2009 by Snigel Link to post Share on other sites
EOL Posted April 9, 2009 Report Share Posted April 9, 2009 Snigel thats one good looking AK you got there Link to post Share on other sites
christavel! Posted April 9, 2009 Report Share Posted April 9, 2009 Grim: I think its quite hard to get anything to do with weapons in my country, as far as im aware i would only really be able to buy shotguns. Although im not clued up on gun laws in my country, i only know that the police and the bad guys are the only guys with firearms Link to post Share on other sites
Billy Bob the Sniper Posted April 9, 2009 Report Share Posted April 9, 2009 Snigel: Nice AKMS! Who makes that? And could you explain how you weathered it? Everyone: I am thinking about getting me a LCT AKM '08. Thats the one with the real take down right? Hows the finish on the LCTs? Link to post Share on other sites
PlasticMag Posted April 9, 2009 Report Share Posted April 9, 2009 It's made by Danmu. You can buy it on Gunner's. Link to post Share on other sites
Snigel Posted April 9, 2009 Report Share Posted April 9, 2009 So that's what "DM" stands for It's a fine weapon, but if you're going to buy an ak then go for the rmw/lct instead! Went over it with some steel wool and a scotch brite-pad. Link to post Share on other sites
Billy Bob the Sniper Posted April 9, 2009 Report Share Posted April 9, 2009 Ok thanks guys, I was looking on WGC, I see the LCT 09 kit and the LCT 08 complete gun, both AKM's. Which one should I get? I am leaning towards the '09 kit as I think it has the real take down to it. Am I right or wrong? Also, I am buying me about 8 AK mag shells (7 bucks a pop ) and I am hopefully going to mod them like GRIM did. Link to post Share on other sites
my_plague_666 Posted April 10, 2009 Report Share Posted April 10, 2009 (edited) Grim: I think its quite hard to get anything to do with weapons in my country, as far as im aware i would only really be able to buy shotguns. Although im not clued up on gun laws in my country, i only know that the police and the bad guys are the only guys with firearms as long as it's not a pressure bearing part it's fine. so handguards, magazines, stocks etc are all fine. edit: get the LTC '09 model over the '08. better built in general and has proper takedown. Edited April 10, 2009 by my_plague_666 Link to post Share on other sites
AustrianGuy Posted April 10, 2009 Report Share Posted April 10, 2009 kalashnikova vs. kitchen floor and yes i know the pbs1 silencer wouldn't work with the aksu (realsteel) but what the heck, it looks so gorgeous and yes my cellcam is fubar, but 2 months out my new blackberry will be rendering my craptastic sony useless Link to post Share on other sites
Rambo Kid Posted April 10, 2009 Report Share Posted April 10, 2009 Which would be easier to fit RS handguards to, a Dboys AKS74 or a VFC AKS74? Which one should I get? Link to post Share on other sites
Lajjvo Posted April 10, 2009 Report Share Posted April 10, 2009 Rambo Kid: If I'm not mistaken, the newest dboys aks74 is a 100% clone of the vfc. Or maybe i'm thinking of the cyma? Anywhay, I myself would think that both require some modification to the handguards. Not much, just some filing here and there. My $0,02 Link to post Share on other sites
Kyrian_Zenda Posted April 10, 2009 Report Share Posted April 10, 2009 I have a DBoys AKS74, and it took a little bit of filing of the wood grips to make my real grips fit, and even though they fit, there's still a little bit of pure wood underneath showing through on one side. But as far as I'm aware, the DBoys are pretty much copies of the VFC, so I'd guess you'd have to do the same to a VFC. Link to post Share on other sites
AustrianGuy Posted April 11, 2009 Report Share Posted April 11, 2009 this is a nobrainer, if you've got the money, buy a vfc, the quality difference is really huge, maybe not at first sight, but if you get into them, you surely notice the vfc godness! (my aksu above is a vfc and the 74m is a kalash) Link to post Share on other sites
Geri Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) Here is my favorite. I finished it almost, but some of small parts are needed yet. I think it's enough unique... Edited April 11, 2009 by Geri Link to post Share on other sites
Bersy Posted April 11, 2009 Report Share Posted April 11, 2009 Geri that looks SWEET! where did you get that front end from? Link to post Share on other sites
Geri Posted April 11, 2009 Report Share Posted April 11, 2009 It's the original front end of the cyma Akm but I changed the gas tube and put on a heat shield from a real steel one... Link to post Share on other sites
Fingers Posted April 11, 2009 Report Share Posted April 11, 2009 Geri that is simply gorgeous! I tip my hat to you sir Link to post Share on other sites
Bersy Posted April 11, 2009 Report Share Posted April 11, 2009 cool i'd love to get some RS parts for mine but there quite hard to get in the UK tho Link to post Share on other sites
Rambo Kid Posted April 11, 2009 Report Share Posted April 11, 2009 I can't decide on which AK I want to buy. I have narrowed it down to the Real Sword Type 56, the VFC AKS74, or an LCT kit (probably AKM). Help? Link to post Share on other sites
snorkelman Posted April 11, 2009 Report Share Posted April 11, 2009 (edited) pick the model you want buy from the manufacturer that offers it Tbh theres not much folks can 'help' with that part of the choice given all three are different models from different periods real sword has the most realistic fit and finish of the three (as in replicates it rather than just approximates it for the model its attempting to be) also has the best set of out the box gearbox internals (but often needs work done on the hop). Kinda academic though if you actually prefer the look of a 74 or want a gun for a russian loadout.. If its going to be a "dress it up in real bits gun to personalise it and make it my own as an interesting long term project" then theres not a lot you can do to a T56, 95 percent of it is already done - the finish is correct the furnitures correct buy yourself a real bayonet, a real sling and maybe tape a real chinese mag onto the side of the airsoft one with a few inert rounds showing and well thats about it.. Edited April 11, 2009 by snorkelman Link to post Share on other sites
Rambo Kid Posted April 11, 2009 Report Share Posted April 11, 2009 I think I want the AKS74, as I am going to be doing a late '80s VDV in Afghanistan loadout... How are the VFC's internals? I will most likely be replacing the wood with RS wood, so that doesn't really matter to me. Link to post Share on other sites
my_plague_666 Posted April 11, 2009 Report Share Posted April 11, 2009 depends what you want them to do. if you dont mind staying at about 310 it'll run stock for ages. the gears are very tough, the motors arent too great and i believe most of the internals are polycarbonate so they should be strong enough. i've never had problems from either of my VFCs, and one of them is a 1st run AKSU Link to post Share on other sites
GRIM! Posted April 11, 2009 Report Share Posted April 11, 2009 Looking real hot Geri i love AMD's My Ino pimped with romy love. Link to post Share on other sites
The Crunchy Bunny Posted April 11, 2009 Report Share Posted April 11, 2009 Lol. Nice East LA Crack dealer loadout. Link to post Share on other sites
GRIM! Posted April 12, 2009 Report Share Posted April 12, 2009 Thats actually my real clothes XD Link to post Share on other sites
Recommended Posts