Jump to content

AK & Variants Picture Thread


Recommended Posts

The first on is a bog standard AK47. They are supposed to be pretty good. The second is an AKM, I have one and it's a great gun. Both guns shoot really hot. Mine shot 475 out of the box, and has settled to 460.

 

Basic rundown of the differences:

 

AK47:

*Vented Gas Block, has 3 holes on each side.

*Milled Reciever

*Non-Laminated Furniture, Lacks Bulge in Lower Handguard

*Sling Mount on Reciver, sling mount on gas block

*Smooth Reciver cover

* Basic Wood pistol Grip

AKM:

*Vented Gas Block, has one semicircle cutout on each side

*Stamped reciver

*Laminated Furniture, Bulge on Lower handguard

*Sling Mount on Stock (only on models with a fixed stock), front sling mount on Lower handguard retainer

*Ribbed Reciver Cover

*Rear Sight Graduated to 800m

* Checkered Bakelight Pistol Grip

 

Neither of those airsoft AKs have laminated furniture. Both have 800m rear sights.

Link to post
Share on other sites
  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Not really an AK, but it is russian

RPD- under construction ;)

 

dscf3420asg9.th.jpgthpix.gif

 

dscf3421azd8.th.jpgthpix.gif

 

 

Hey man, sweet RPD. I and a couple others guys I'm working with have done a TON of research on building an AEG RPD and one of those collaborating with me bought a parts kit and gearbox. Just so you know, an AGM MP40 gearbox is a very good choice, the M249 gearbox is too big. I'm sure you'll be able to make it work so best of luck.

Link to post
Share on other sites

Hey man, sweet RPD. I and a couple others guys I'm working with have done a TON of research on building an AEG RPD and one of those collaborating with me bought a parts kit and gearbox. Just so you know, an AGM MP40 gearbox is a very good choice, the M249 gearbox is too big. I'm sure you'll be able to make it work so best of luck.

 

You are right.

Without adjusting it- the GB of the M249 is to big, but...

The receiver of the RPD is 35 mm large. The GB after cutting off the side parts will be 28-29 mm large- so it is ok (the dust cover is 28 mm wide inside)

The lenght is ok, especially after cuting about 4-5 mm of the internal steel part of the original weapon.

The main problem is the hight. After adjusting, the GB will be about 6-7 mm to high, but it s OK with me. The receiver will be just a little bit higher. I dont' have a chance to get a MP40 GB in Poland so it must to be that way.

thx for the support :)

Edited by jojo31
Link to post
Share on other sites

Alright, I'm still on a learning curve when it comes to AKs...

 

http://www.wgcshop.com/pcart/shopper.php?i...PK-59_srch_wood

 

Would this work with my VFC AKS74UN? If not, can it be modded to fit?

 

Also, know of any synthetic upper handguards with a weaver rail on the top (none on the sides) that would work?

 

Thanks.

 

-Vic

 

Edit: Something like this:

 

http://www.cheaperthandirt.com/37144-1.html

Edited by Victory
Link to post
Share on other sites
After adjusting, the GB will be about 6-7 mm to high, but it s OK with me. The receiver will be just a little bit higher. I dont' have a chance to get a MP40 GB in Poland so it must to be that way.

thx for the support :)

 

 

If I were you, I'd try and lower the receiver rather then making it high. So basically your change in dimension comes out the bottom rather then the top.

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.