chris u'5 Posted March 7, 2009 Report Share Posted March 7, 2009 (edited) Can anyone suggest a retailer where I can buy a RS wooden handguard for this rifle? Im based in the UK so a store in Europe would be best. Thanks. Edited March 7, 2009 by chris u'5 Quote Link to post Share on other sites
snorkelman Posted March 7, 2009 Report Share Posted March 7, 2009 russmilitary has russian aksu handguards from time to time (you just need to keep an eye out to see when they've got stock) http://www.rusmilitary.com/html/c-deact_furniture.htm Around 50 quid plus postage if you can get someone stateside to source and send them over then theres always bulgarian ones from K-VAR (however Im not sure if their current ones are as close a match to russian ones as they used to be - they diont look like a partcularly laminated construction these days and the bulgarian colour was never close to the russian finish - more brown than red) http://www.k-var.com/shop/home.php?cat=296...on=0&page=3 around 60 plus postage plus shipping from whover buys them stateside to you personally if I were yuo I'd just keep a look out for next time rusmil have any in stock Quote Link to post Share on other sites
chris u'5 Posted March 7, 2009 Report Share Posted March 7, 2009 Thanks man. I did actually have a look at Rusmil but I didn't realise that they restock items. I just assumed that they were gone. I'll keep an eye there then. Quote Link to post Share on other sites
altekh Posted April 20, 2009 Report Share Posted April 20, 2009 (edited) I'm propably ordering this awesome gun this week! I was wondering if there are different version of this gun on the market (have they done any updates on it after the release)?. WGC is out of stock on the gun and magazines so I'm planning to order it from Uncompany. Many people seem to have reported problems and parts braking. Would it be wise to order aluminium/steel replacement parts beforehand? What are the parts that are most likely to brake? Does anyone have experience with the CO2 magazines? Edited April 20, 2009 by altekh Quote Link to post Share on other sites
DeathWish007 Posted April 21, 2009 Report Share Posted April 21, 2009 Im curious on how hard it is to take off the front Handguards? Has anyone tried yet? Im interested in getting this gun but I would have to replace those ugly handguards. I would also like to know about those co2 mags. Quote Link to post Share on other sites
-FIDO- Posted April 24, 2009 Report Share Posted April 24, 2009 I'm propably ordering this awesome gun this week! I was wondering if there are different version of this gun on the market (have they done any updates on it after the release)?. WGC is out of stock on the gun and magazines so I'm planning to order it from Uncompany. Many people seem to have reported problems and parts braking. Would it be wise to order aluminium/steel replacement parts beforehand? What are the parts that are most likely to brake? Does anyone have experience with the CO2 magazines? buddy of mine is selling 8x mags for 40$ a piece shoot me a pm if youre interested =) Quote Link to post Share on other sites
wolfsbane Posted June 8, 2009 Report Share Posted June 8, 2009 anyone knows who sells these in the UK? I am really interested but would really need the aftersales to make me take the plunge. Quote Link to post Share on other sites
chris u'5 Posted June 8, 2009 Report Share Posted June 8, 2009 Land Warrior have them. Quote Link to post Share on other sites
The_Boy_Swift Posted June 9, 2009 Report Share Posted June 9, 2009 Elite Shooting Centre have them as well. Quote Link to post Share on other sites
wraithxt1 Posted June 17, 2009 Report Share Posted June 17, 2009 Any new items released for this gun? No upgrades or tightbore barrels? What about new bolt set and carriers? Why no love for this unique GBB compared to the WE or WA? Quote Link to post Share on other sites
snorkelman Posted June 17, 2009 Report Share Posted June 17, 2009 (edited) justin over at daytona gun has: all the firecontrol parts available in steel - hammer, trigger, trigger hook, hammer sear, valve knocker, selector bolt carrier in steel CNC'd hop up unit (anodized black) CNC'd standard type bolt Ra-tech have: bolt carier in steel CNC'd hop unit (plain silver) CNCd adjustable NPAS bolt GHK mags are available green gas and CO2 caplet versions tightbore barrel? pick whatever you want - all the hop units (GHK RATech and Daytonagun) all take standard AEG barrels. about the only parts you CANT get third party are: recoil spring guide rod and cover latch the various springs the firecontrol pins the little diddly bits for the hop unit (actuating lever, adjustment barrel, inner barrel clip) pistol grip mounting block rubber bolt carier buffer which is actually a wee bit annoying - cos anyone wanting to do an all steel ground up build is stuck buying an entire GHK kit for those parts (or fishing around to see if they can snag those GHK parts individually from RA-Tech etc) Edited June 17, 2009 by snorkelman Quote Link to post Share on other sites
wraithxt1 Posted June 17, 2009 Report Share Posted June 17, 2009 I guess I didnt look hard enough, it seems like they have everything you need to make this a fully skirmishable weapon, is that correct? Quote Link to post Share on other sites
snorkelman Posted June 17, 2009 Report Share Posted June 17, 2009 grab the steel bolt carrier, adjustable npas bolt, CNC'd hop unit and steel selector paddle and it should be good to go - around 300 dollars of upgrades onto whats currently a 350 dollar gun. if you wanted to go whole hog then full gun with all the parts would work out around 770 however 350 of that is price of the gun and dBoys are bringing there version out which might knock a chunk off the total Quote Link to post Share on other sites
wraithxt1 Posted June 18, 2009 Report Share Posted June 18, 2009 Any idea when dBoys is releasing a version? I'd love a full sized AK74! Quote Link to post Share on other sites
snorkelman Posted June 18, 2009 Report Share Posted June 18, 2009 rumour had it as being in couple of months from now Quote Link to post Share on other sites
wraithxt1 Posted June 24, 2009 Report Share Posted June 24, 2009 I was looking into the GHK again and it looks like no one has them in stock. What happenend, were these taken out of production? Quote Link to post Share on other sites
lukvdh Posted June 24, 2009 Report Share Posted June 24, 2009 Problem MK II. The gun is now shooting auto in the 'Safety' position. Can anyone help? Sorry to revive this topic... I have the same problem: GHK AKS74U fires full auto when safety is set to... safe. I found out that the selector-lever has a cut-out profile that fits the internal selector-safety-"thing". But the combination of the lever and the "thing", when the cutout on the lever fits nicely, is not OK. The "thing" (internal safety-selector-part) is not completely vertical but points to the fron of the gun a bit. When thz "thing" could be vertical I think the selector and safety would work. But, as the cut-out is there and so is the shape of the "thing" I can't get these parts fixed. Anyone been there done that and has a working fix? (Sorry about me calling it the "thing", but there was no manual and no exploded view with part-names or -numbers with my gun. Anyone has a manual / exploded view that could be shared? But the most urgent is the selector / safety not working. I hope someone will have a fix. Thanks in advance. Quote Link to post Share on other sites
snorkelman Posted June 24, 2009 Report Share Posted June 24, 2009 in safe all that matters is that the internal paddle of the selector prevents the two rear fingers of the main trigger part from moving - that stops the trigger pivoting far enough for the hammer to be released from the front trigger hooks the rear trigger hook (the sprung loaded part at rear of the trigger) comes into play in auto and semi in auto the selector paddle moves backwards far enough to clear the rear legs of the trigger, allowing the trigger to pivot and disengage the front hooks from the hammer, while maintaining pressure on the rear trigger hook finger so that part remains clear of the hammer in semi the paddle is clear of both the trigger fingers and the rear hook finger so that when the trigger is pulled and held back the hammer gets temporarily caught by the rear trigger hook - when trigger is released the rear hook lets go of the hammer and the hammer is caught by the front hooks the paddle is angled forwards from vertical, but by sounds of it theres enough play on yours to allow the trigger to tilt forward enough to release the hammer from the front hooks. most likely causes that spring to mind would be: that the inner paddle isnt far enough down into the receiver eg the big 'e'-clip that holds it against right hand side of the receiver might not be seated properly in its groove, OR the small axis shaft that fits into left hand side of the receiver isnt located in its hole other alternative is that the paddle is fractured at its mounting point (ie where its threaded for the outer selector lever screw to screw into it) and is just yeilding to pressure of the trigger being pulled or its somehow got bent (though the cast material the paddle is made from is more likely to fracture than bend) Quote Link to post Share on other sites
lukvdh Posted June 25, 2009 Report Share Posted June 25, 2009 i fixed the selector plate and its pretty awesome, though there are some flaws, like the one zeaken encountered. The guy on gasgun.info forum hasnt had a problem with his yet. How did you fix it? Quote Link to post Share on other sites
The_Boy_Swift Posted June 25, 2009 Report Share Posted June 25, 2009 If the steel selector plate is out of position, you can put it back into position by holding the paddle in place with a large flat-headed screwdriver, then rotating the selector arm in the appropriate direction to adjust the threaded part of the arm. I have finally upgraded my AKSU with the RA Tech steel bolt carrier, aluminium hop unit and aluminium NPAS bolt. I am hoping it should be fairly indestructable now but I will try and skirmish next weekend and will let you know how I get on All the RA Tech parts are top quality but the bolt carrier is kind of expensive (I think it was about 90 quid inc. shipping ) Quote Link to post Share on other sites
wraithxt1 Posted June 26, 2009 Report Share Posted June 26, 2009 I just bought a used GHK AK74U with a tightbore barrel in it. I'll be ordering the complete NPAS bolt and aluminium hop up unit tonight. I was going to order a few CO2 magazines, but I have yet to hear if they are actually worth it or not! Do they work at a lower temperature? Do you get less cooldown, or more shots per magazine? Why would I get a green gas mag over CO2? Quote Link to post Share on other sites
kruck Posted June 26, 2009 Report Share Posted June 26, 2009 I believe it improves consistency shot to shot. I have a question though; with CO2 in it, and the adjustable NPAS thing, is it possible to reduce FPS to UK power levels? Quote Link to post Share on other sites
wraithxt1 Posted June 26, 2009 Report Share Posted June 26, 2009 I'm very interested in the answer to that as well, be it with green gas or co2. I'm moving to Japan so I need it to shoot under 320 FPS. Quote Link to post Share on other sites
lukvdh Posted June 26, 2009 Report Share Posted June 26, 2009 If the steel selector plate is out of position, you can put it back into position by holding the paddle in place with a large flat-headed screwdriver, then rotating the selector arm in the appropriate direction to adjust the threaded part of the arm. .... I don't think that plate is "out of position'. There is a cut-out form in the selector-lever which fits the threaded end of the plate. Those 2 parts can only fit in one position. And the position this assembly is in seems not to be OK in my gun. Or do you change relative position of those 2 parts without them exactly fitting the 'cut out' (I hope you understand what I'm trying to tell)? P.S. Seems your gun is rather 'very OK' ;-) Where did you buy the Ra-Tech parts? Thanks for the reply! Quote Link to post Share on other sites
snorkelman Posted June 27, 2009 Report Share Posted June 27, 2009 checked the brass sleeve hasnt slipped on the trigger pin? - it should go thru left hand side of trigger and thru the spring loaded rear trigger hook, if its slipped out of place then trigger may not be sitting straight in the pin and be tilting downwards slightly on the right hand side - might give you enough free movement to release front trigger hook from the hammer Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.