ED-SKaR Posted July 29, 2008 Report Share Posted July 29, 2008 (edited) http://img3.imagebanana.com/img/eqew1h0k/_7281273.jpg Got this one this sunday...shoots straight for a mile, and is hell of a lot fun... Put down my rifle after the first game sunday and used this one the rest of them... I bloody love it that is exactly how a benelli should look edit whups, sorry Edited July 29, 2008 by ED-SKaR Link to post Share on other sites
Ledpocket Posted July 29, 2008 Report Share Posted July 29, 2008 A little late on the draw, but my chopped up maruzen is an 1100 semi auto. No pumping required. Also, no shells, it is mag fed. Link to post Share on other sites
MDK_Marshal Posted July 29, 2008 Report Share Posted July 29, 2008 [img ]http://img3.imagebanana.com/img/eqew1h0k/_7281273.jpg[/img ] Got this one this sunday...shoots straight for a mile, and is hell of a lot fun... Put down my rifle after the first game sunday and used this one the rest of them... I bloody love it I've got one of those. DE M56A, mine is, full stock and shorter barrel. 'tis what my pic on the previous page is of Love it to bits. I need another one with the retractable stock! This one does need a cheekpeice with a shell holder, though, and I can't seem to find one around for next to nothing I'll get one eventually, and then leave the thing the hell alone. though, if something inside goes snap, I'm sure as hell gona be whipping up a replacement part! Which is a point. I do believe I heard that these things have plastic sears. Anybody been brave enough to open theirs and find out? I don't want to break mine, or I'd do it myself xD Link to post Share on other sites
Smurf Posted July 29, 2008 Report Share Posted July 29, 2008 Very nice. What kit is that specifically? Did that foregrip require any modding to get to fit? The site where I bought it from just has it down as a military spec oil finish set. http://www.havlinsales.com/ The foregrip required a groove to be cut into it, I am doing a full write up on the fitting of the kit so pictures will be up in the next day or so. Link to post Share on other sites
Pkekyo-Nor Posted July 29, 2008 Report Share Posted July 29, 2008 (edited) that is exactly how a benelli should look Thank you, and I agree completely. MDK Marshal: The cheekrest is Pantac/Phantom's - got it off RWA... And I think it actually cost me more than the gun itself I'm looking into getting another one of these, possibly one with the shorter barrel (for a breacher role... full stock is still the way to go though...or maybe a RS folding stock, could be a fun project) I'm not opening this baby up until it breaks... And it probably will, but it's cheap as dirt so I'll definitely just get myself another one... The look and feel of it is awesome, despite extensive use of plastics... I just love this thing to death, really... Barely have left my side since sunday. /EDIT: and a shot with me'n my trusty new M3 Edited July 29, 2008 by Pkekyo-Nor Link to post Share on other sites
H.U.N.K Posted July 30, 2008 Report Share Posted July 30, 2008 oh my... Good ,bad ,or not sure ? Hows your spas coming along anyway ,I'm still waiting to see it Speak of the devil I just done it all yesterday! I bought a barrel RIS adapter that didn't quite fit so I 'freestyled' that a little at a hardware store and it fits perfectly. I've sawn the bulk of the barrels off and also attached the streamlined, front-sight from my old M3 Shorty. Didn't like the glossy-ness of the pump-grip so I took some fine-grain sandpaper to that to give it a real, flat matte look. Looks fab. I'll neaten up the front end where I've sawn it and post some pics. Its a really weird looking SPAS if I'm honest but I'm quite chuffed with it. Link to post Share on other sites
Typewriter Posted July 30, 2008 Report Share Posted July 30, 2008 Heres some pics of my new, lovely shotgun (DE:s M3 with full stock and short outer barrel) Gun itself, with one shell magazine and sling ^^ Gun in funny position ^^ If anyone has guestions about this shotty, please ask. Link to post Share on other sites
rhino Posted July 30, 2008 Report Share Posted July 30, 2008 here's a quick Q... would the Smokeys M3 pistolgrip and Smokeys M3 Vertical pumphandle fit on one of these Double Eagle Benelli shell loading clones? I remember someone saying that the G&P XM1014 collapsing stock would fit (can't remember who it was mind...) Link to post Share on other sites
ED-SKaR Posted July 30, 2008 Report Share Posted July 30, 2008 here's a quick Q... would the Smokeys M3 pistolgrip and Smokeys M3 Vertical pumphandle fit on one of these Double Eagle Benelli shell loading clones? I remember someone saying that the G&P XM1014 collapsing stock would fit (can't remember who it was mind...) short answer, should do. long answer, it is a clone of the TM, and the smokies parts are designed for the TM, so it should fit. the first anyone knows that it dosent is when someone trys it . Link to post Share on other sites
gopeder111 Posted July 30, 2008 Report Share Posted July 30, 2008 (edited) Does anybody know if the m500 or r870 have the same width as a benelli m3? I'm gunna try to modify a rs mossberg 500 speedfeed pistol grip to fit on my utg m3 but would first like to know if it would even be possible heres the grip (haven't ordered it yet) http://www.lapolicegear.com/splawenpigrw.html thank you EDIT: I found out that both of their recievers are 1.5" so I ordered it if anyone has any experience or tips on installing real steal grips on a UTG/marui/DE benelli m3 let me know Edited July 30, 2008 by gopeder111 Link to post Share on other sites
whosloosin92 Posted July 30, 2008 Report Share Posted July 30, 2008 Got bored. I know the rear sight is on backwards. I like it that way. Link to post Share on other sites
Auroris Posted July 31, 2008 Report Share Posted July 31, 2008 My spas so far. Still stuff to do! Follow it in technical discussion... or die! Link to post Share on other sites
whosloosin92 Posted August 1, 2008 Report Share Posted August 1, 2008 I can't find the edit button for some reason on my last post but here are some updated pictures. I was stripping both my shotguns down for a repainting and sanding the barrel before painting it and i wondered what it'd look like with all the paint off. It turned out looking really good so I went ahead and did the same on the magazine tube. The barrel looks flawless but unfortunately the magazine tube is getting scratched by the pump. Link to post Share on other sites
my_plague_666 Posted August 1, 2008 Report Share Posted August 1, 2008 looks better without the stock and sights whosloosin, keep it that way looking interesting auroris, odd, but i reckon it'll look pretty cool. Link to post Share on other sites
Panzer-Puffin Posted August 1, 2008 Report Share Posted August 1, 2008 That looks awsome. I agree with my plague, keep it as it is man, it looks cool. Link to post Share on other sites
Smurf Posted August 2, 2008 Report Share Posted August 2, 2008 Here is the write up on how to install the wood furniture for the Mossberg M500. http://www.arniesairsoft.co.uk/forums/inde...t&p=1850784 Link to post Share on other sites
airsofter0866 Posted August 3, 2008 Report Share Posted August 3, 2008 I have heard that some of the m500 after market loading arms fir the ACM version and some dont. Can anyone confirm which ones will? Link to post Share on other sites
Smurf Posted August 4, 2008 Report Share Posted August 4, 2008 In another thread, someone has fitted the proud steel loading arms successfully, they are slightly thicker than the standard ones and make racking slightly more tough, but they fit. Link to post Share on other sites
sandstorm Posted August 4, 2008 Report Share Posted August 4, 2008 (edited) Hmmm... My shotgun project is kind of stalled at the moment. Tried to fit this sliding stock onto my M1100 with some stock problems. Only thing is, in the end the friggin gas hose and stock connector screw are upside down. Since the stock is suppsoedly fittabel to M870, it should fit an M1100 as well, with the bodies identical, right? -Sandstorm Edited August 4, 2008 by sandstorm Link to post Share on other sites
airsofter0866 Posted August 4, 2008 Report Share Posted August 4, 2008 I think th only difference in the bodies is the m1100 has a different ejection port but everything else should be the same if Im not mistaken Link to post Share on other sites
sandstorm Posted August 5, 2008 Report Share Posted August 5, 2008 That's what I thought, but I think there's got to be some further differences inside. Body probably is same, but the way the pump-action and semi-auto bolts are handled can mean that the gas hoses can't go through same spots in the stocks. Oh well, I'll see if I can find a M870 to check out. Annoying to find out at this point, though... Link to post Share on other sites
elchinator Posted August 5, 2008 Report Share Posted August 5, 2008 Tanaka/Airsoft-Surgeon M870 (slightly modified): Link to post Share on other sites
whosloosin92 Posted August 5, 2008 Report Share Posted August 5, 2008 That has to be one of the best shotguns yet! Shooting the slug shots with that? Link to post Share on other sites
elchinator Posted August 6, 2008 Report Share Posted August 6, 2008 That has to be one of the best shotguns yet! Shooting the slug shots with that? Yep! And it makes A LOT of fun! Although it hasn't got the range of the 6mm-Version, it still makes big holes on short distances. Link to post Share on other sites
Stealth1911. Posted August 7, 2008 Report Share Posted August 7, 2008 My old ACM M500, wish I never sold it each time i look at this piccy Link to post Share on other sites
Recommended Posts