rhino Posted May 5, 2011 Report Share Posted May 5, 2011 very nice... making me regret selling mine now hwagan Quote Link to post Share on other sites
hwagan Posted May 5, 2011 Report Share Posted May 5, 2011 £150 off these very forums, and that's with the G&P front end, VFC body and (i think) G&P stock, in perfect working order and almost externally perfect to boot. I feel like a lucky man Quote Link to post Share on other sites
notrabies Posted May 6, 2011 Report Share Posted May 6, 2011 What you need there, notrabies, is a SureFire 620T: I just linked to the first retailer that came up on google. I'm sure there are cheaper options out there. And there's also eBay to consider. I recently saw one of there on there, and the winning bid was not bad at all. But although the light is made to fit real-steel 1100's and 11-87's, there is no guarantee that it will fit a Maruzen 1100. But some light modification will take care of that. Ooh, I like the look of that a lot, and I'm fairly confident that it will fit really well. Now in addition to my M1100, I've got a second hand Maruzen 870. The thing is gorgeous, but power on green gas in nonexistent past 1 bb per shot. I've never run something on external air or CO2, but I'm willing to try. Any pointers? Horrible cell phone picture: Quote Link to post Share on other sites
Whitehawk Posted May 19, 2011 Report Share Posted May 19, 2011 Upgraded my shotty a bit. 2 Quote Link to post Share on other sites
Spud2054 Posted June 12, 2011 Report Share Posted June 12, 2011 Quote Link to post Share on other sites
Horsem4n Posted June 12, 2011 Report Share Posted June 12, 2011 I don't think I ever posted my shotgun. I took this pic a few months back. I was going to wait until I had gotten a better optic and a flashlight to post a pic, but I havnt gotten around to fixn my 552. Have a nice G&P torch on there now, but not near it to take pics and I feel like posting this now. It's a Chinese 6mm M500 with real magpul parts, a falcon ergo ris and a king arms stock adapter. 1 Quote Link to post Share on other sites
FHairsoft1 Posted June 12, 2011 Report Share Posted June 12, 2011 (edited) very nice! I would use the stock on something else but thats just me. Just put a rail on my grip. Need to get pics up! Edit: haha Spud just saw your gun. Mine has the same stock but its the other version. How far back does the pump go on that? Tri shot? Edited June 12, 2011 by FHairsoft1 Quote Link to post Share on other sites
FHairsoft1 Posted June 13, 2011 Report Share Posted June 13, 2011 My 2 shotys! Top one is an old(I've had it about 9yrs) TM tri shot. I have had some issues with the stock. Right now it spins around I just installed the rail for the vert grip, was going to put an AFG on it but I kinda like the vert grip and I dont have an AFG. Bottom one is Bravo or UTG tri shot. Made the custom wood grip, going for the Book of Eli look, ofcourse working with wood I didn't get it fit quite right and it cracked hence the tape, but it worrks very nice! Quote Link to post Share on other sites
ED-SKaR Posted June 13, 2011 Report Share Posted June 13, 2011 My 2 shotys! Top one is an old(I've had it about 9yrs) TM tri shot. I have had some issues with the stock. Right now it spins around I just installed the rail for the vert grip, was going to put an AFG on it but I kinda like the vert grip and I dont have an AFG. Bottom one is Bravo or UTG tri shot. How is the barrel holding up with that vert grip. I found that the plastic machine box that holds the barrel up flexes when I fitted a similar grip, I never used it much because I was worried about the gun snapping in half!. I put a torch on there instead . Quote Link to post Share on other sites
FHairsoft1 Posted June 13, 2011 Report Share Posted June 13, 2011 hmmmm seems to be ok, i just put it on last night. I will look closer at it next time, but everything seemed to be fine Quote Link to post Share on other sites
scorch Posted June 13, 2011 Report Share Posted June 13, 2011 Does anyone know if the KTW spas stock is TM compatible? Quote Link to post Share on other sites
MrM60 Posted June 20, 2011 Report Share Posted June 20, 2011 Does anyone know if the KTW spas stock is TM compatible? It's not, but there is a guide on ASF on how to modify it to fit. Quote Link to post Share on other sites
LeeBristolAirsoft Posted June 24, 2011 Report Share Posted June 24, 2011 Horsem4n, that's one pimped shotgun! Very nice!! Quote Link to post Share on other sites
TheFull9 Posted June 25, 2011 Report Share Posted June 25, 2011 Finally got a side saddle cut down and sorted, pretty happy with the look. If anyone's after something similar that's easy to attach to airsoft shotguns, check out http://www.3gungear.com/ Needed cutting down to clear room for the pump action on the springer tri-shot of course (sadly, because full sized it looked awesome) and if you do go for one, make sure your first port of call is to stick some shells in and leave the elastic to stretch out for a good few weeks, seriously too tight when you first get it. 1 Quote Link to post Share on other sites
MODDAN Posted July 6, 2011 Report Share Posted July 6, 2011 Just spiced my old 6mm Mossberg up a bit and installed an ATI DeLuxe Shotgun Heat Shield on it: Also equipped with a SpeedFeed stock and a SureFire 623FA forend. Quote Link to post Share on other sites
titchikov Posted July 7, 2011 Report Share Posted July 7, 2011 Cool! I've always wondered, what do SpeedFeed stocks actually do? Quote Link to post Share on other sites
shmook Posted July 8, 2011 Report Share Posted July 8, 2011 It gives you quicker access to spare ammo, as it's stored in the buttstock, instead of having to rummage around in pouches or pockets after your sidesaddle runs out! Do they take airsoft ammo though? I've never compared it to real steel... I should do, as I have boxes of both lying around, just not got round to it! Quote Link to post Share on other sites
ED-SKaR Posted July 8, 2011 Report Share Posted July 8, 2011 Do they take airsoft ammo though? I've never compared it to real steel... I should do, as I have boxes of both lying around, just not got round to it! TM mag-shells are larger than 12bore, but not quite as big as 10bore. Maruzen shells are approximately the same size as 16bore. I don't know about other shells. Quote Link to post Share on other sites
Shardik Posted July 8, 2011 Report Share Posted July 8, 2011 TM shells won't fit, I have no idea about others. Quote Link to post Share on other sites
sandstorm Posted July 8, 2011 Report Share Posted July 8, 2011 Maruzen's blue shells for M870 and M1100 were undersized compared to 12-gauge, the last time I checked. More like 14-gauge or 16-gauge, IIRC. Quote Link to post Share on other sites
MODDAN Posted July 8, 2011 Report Share Posted July 8, 2011 Actually, I find that Marui shells do fit the SpeedFeed stocks. Or at least they do fit in my SpeedFeed III 0250: Although it is a snug fit, and they are not the easiest to remove, but they do fit. My 0250 has also seen some use, so maybe the wear and tare made the shells fit? And the Marui shells are quite a bit larger than real steel shells, so I seriously doubt that two will fit on top of each other: Quote Link to post Share on other sites
MrM60 Posted July 9, 2011 Report Share Posted July 9, 2011 ACM Sawed off 870. Those G&P short mags are complete junk. I broke both just trying to get them out of the magwell. Quote Link to post Share on other sites
Typewriter Posted July 20, 2011 Report Share Posted July 20, 2011 ACM 870 Quote Link to post Share on other sites
sandstorm Posted July 21, 2011 Report Share Posted July 21, 2011 Hey, what kind of 870 is that, copy of Maruzen shell-fed gas shotty? Quote Link to post Share on other sites
shmook Posted July 21, 2011 Report Share Posted July 21, 2011 Foregrip is wrong for a maruzen copy, and I don't think anyone would be stupid enough to clone those anyway! My guess is it's a single shot sniper 'shotgun' Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.