ED-SKaR Posted May 27, 2014 Report Share Posted May 27, 2014 I really want to get my over under design finished this thread has some gorgeous inspiration, I have a trigger mech sketched out and am debating which shells to use they would need to be gas in shell so either goblin or the tanaka? Madbull are supposed to be the best shells for the Tanaka shotgun. Quote Link to post Share on other sites
Whitehawk Posted June 5, 2014 Report Share Posted June 5, 2014 TM M870.Still waiting for some shell holders and SF weaponlight. Quote Link to post Share on other sites
Wingmann Posted July 21, 2014 Report Share Posted July 21, 2014 Knock, knock! 7 Quote Link to post Share on other sites
TheFull9 Posted July 21, 2014 Report Share Posted July 21, 2014 Oh ffs.. I wanted to be the first one with that config *teddies out the pram* Did you chop the barrel or buy the after-market one mate? Awesome little gun, cannot wait to build something along the same lines. Quote Link to post Share on other sites
Wingmann Posted July 22, 2014 Report Share Posted July 22, 2014 I chopped it. There has to be some kind of "guide" in the M870 thread I think. Quote Link to post Share on other sites
Wingmann Posted July 22, 2014 Report Share Posted July 22, 2014 Right side. Sorry for the awful light. 2 Quote Link to post Share on other sites
private_ruud Posted July 27, 2014 Report Share Posted July 27, 2014 that is beautfiul ! 1 Quote Link to post Share on other sites
Drifty Posted August 4, 2014 Report Share Posted August 4, 2014 Wingmann - how did you get the shell holder on? Do I need to disassemble the gun? Quote Link to post Share on other sites
Wingmann Posted August 4, 2014 Report Share Posted August 4, 2014 Wingmann - how did you get the shell holder on? Do I need to disassemble the gun? No need to disassemble anything. There are two pins crossing the body that you will substitute with the ones in the kit. Punch one, swap it, punch the second and repeat. Remember to place the threaded side of the new pins to the left of the body. That's all. Quote Link to post Share on other sites
Drifty Posted August 7, 2014 Report Share Posted August 7, 2014 (edited) No need to disassemble anything. There are two pins crossing the body that you will substitute with the ones in the kit. Punch one, swap it, punch the second and repeat. Remember to place the threaded side of the new pins to the left of the body. That's all. Thanks got it I hope someone puts a guide on how to install the Magpul Forend on it :0 Edited August 7, 2014 by Drifty Quote Link to post Share on other sites
Wingmann Posted August 12, 2014 Report Share Posted August 12, 2014 I hope someone puts a guide on how to install the Magpul Forend on it :0 Search Youtube for Lazouche custom shop. He's got a couple of them online about the 870. Quote Link to post Share on other sites
heroshark Posted August 13, 2014 Report Share Posted August 13, 2014 Finally got one .Removed the rail ,sawed the barrel .Fitted an ati heat heat sheild and modded some different sights on it. Beautiful, simple and works well unlike my acm m500. http://s283.photobucket.com/user/heroshark/media/P1010958_zpsc3a4abf1.jpg.html http://s283.photobucket.com/user/heroshark/media/P1010956_zps290a5651.jpg.html 1 Quote Link to post Share on other sites
Drifty Posted August 28, 2014 Report Share Posted August 28, 2014 Breacher has arrived. 2 Quote Link to post Share on other sites
Agent Hunk Posted August 29, 2014 Report Share Posted August 29, 2014 Nice! Whats the average shot count from one gas fill. Quote Link to post Share on other sites
Drifty Posted August 29, 2014 Report Share Posted August 29, 2014 I filled it up with a can of gas that wasnt very full. today's temp was about 100 degrees. I got off 75 shots with one full fill. I will try again tomorrow...hopefully I can hit 80's Quote Link to post Share on other sites
onizuka-gto Posted August 29, 2014 Report Share Posted August 29, 2014 (edited) I filled it up with a can of gas that wasnt very full. today's temp was about 100 degrees. I got off 75 shots with one full fill. I will try again tomorrow...hopefully I can hit 80'sInteresting. I can only get about 50 shots and a bit in 3bb mode @ 25°C ambient temp. Edited August 29, 2014 by onizuka-gto Quote Link to post Share on other sites
FireKnife Posted August 29, 2014 Report Share Posted August 29, 2014 50 shots (so five shells) from one fill isn't bad at all. Now can't wait to get mine. 'FireKnife' 1 Quote Link to post Share on other sites
Agent Hunk Posted August 29, 2014 Report Share Posted August 29, 2014 That's weird my friend says he only gets 3 or 4 shells from the full size 870 which I assumed to have a larger tank. Want the breacher so bad. Quote Link to post Share on other sites
Drifty Posted August 29, 2014 Report Share Posted August 29, 2014 (edited) the regular one i sold got off about 5 shells per fill. I can vouch the breacher has better efficiency. And by 75, i meant 75 shots with gas still coming out even if it meant rolling out of the barrel. Edited August 29, 2014 by Drifty Quote Link to post Share on other sites
onizuka-gto Posted August 30, 2014 Report Share Posted August 30, 2014 That's weird my friend says he only gets 3 or 4 shells from the full size 870 which I assumed to have a larger tank. Want the breacher so bad. That's because the breacher gas magazine can take higher pressure. It seems to be green gas compatible straight out of the box, unlike the tactical which is only rates for 134a aka duster gas. Quote Link to post Share on other sites
DeltaZero Posted September 1, 2014 Report Share Posted September 1, 2014 My Breacher arrived last week.. I now have both the M870 Tactical and the Breacher though the Tactical is soon to be sold. No need for that now I have this baby! Absolutely in love with it! Apologies for the rubbish iphone low light photo, my camera has gone walkies worryingly! 2 Quote Link to post Share on other sites
TheFull9 Posted September 1, 2014 Report Share Posted September 1, 2014 Oh *fruitcage* off. Even down to the Gunfighter Mod 0 that's extremely close to the setup I want. So many guns to buy.. so little time.. If you ever try swapping the pump let me know how it goes. 1 Quote Link to post Share on other sites
DeltaZero Posted September 1, 2014 Report Share Posted September 1, 2014 (edited) Haha I thought of you whilst I was building it mate!! That and my M&P are literally the best thing that has happened this month easily!! Haha As for the pumps fitting it's a no go unfortunately. I wanted to put the G&P half railed grip on there but it's completely the wrong length and the mounting brackets doesn't match up with the actual pump. Really disappointed me, it's the final piece of my puzzle. If you're wanting to put the rail on id get a tactical length and cut the barrels, or wait for G&P to release a railed pump grip which I reckon is inevitable.. (I'm praying) Although saying that when we had the two open I did notice the breacher has a couple of internal improvements.. Edited September 1, 2014 by DeltaZero Quote Link to post Share on other sites
NonEx Posted September 2, 2014 Report Share Posted September 2, 2014 My newly aquired APS CAM870 full size 30 minutes after unboxing; And now; Loving it so far 7+1 capacity is quiet impressive! 3 Quote Link to post Share on other sites
chas Posted September 3, 2014 Report Share Posted September 3, 2014 Dummy shells at EB. Could be look a lot better, but I guess some paint could improve them. http://www.ebairsoft.com/m870-dummy-shotshell-blue-p-7972.html http://www.ebairsoft.com/m870-dummy-shotshell-p-7973.html Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.