Jump to content
junior

Shotgun Picture Thread

Recommended Posts

cheers 'jesus!

 

edit: for the M1100 info, not backing the 'arsed' arguement! dont want to make things personal :P

Edited by shmook

Share this post


Link to post
Share on other sites

i do indeed get the idea!

 

the M590 is more the look i want anyway, i prefer the longer mag tube.

 

as soon as pennies fly into my arisoft funds account, a heatshield shall be bought!

 

cheers bud :)

Share this post


Link to post
Share on other sites

My m500 has developed a very small leek near the fake ejection port. I figured I would just tear it down and lube everything. I have white lithium grease and silicon oil. Are either of those ok? Im not really sure what to use on the o-rings.

 

Share this post


Link to post
Share on other sites

Only safe on metal? Nonsense! I lube all my o-rings in AEGs, sniper rifles, and gas guns with white lithium grease. It's got the staying power that silicone oil doesn't ^_^

Share this post


Link to post
Share on other sites
The whole world disagrees with you. http://www.internetslang.com/CBA.asp

Not even the unpopular ones on urban dictionary think you're right. http://www.urbandictionary.com/define.php?term=CBA

 

In case anyone was wondering how well the extractor fix works, it does wonders. My friend installed it on his m1100 revision. It was barely noticeable, and instantly started ejecting properly again.

 

Except when reaver then bought it and stripped it he managed to somehow break 90% of the parts in the gun! leaving me with a shell of a revision!

Share this post


Link to post
Share on other sites
My Maruzen M1100 Scattergun with Zeke Metalbody, Realsteel cooling thing, Tanaka Scattergun-Sights.

 

can you post me the metal body for free?

 

thanks :P

Share this post


Link to post
Share on other sites

Was going for the "Richard Aitken" version of the Benelli when i built this little puppy from Resident Evil (remake version)

custom01.jpg

custom04.jpg

custom03.jpg

custom02.jpg

 

started out as a Double Eagle benelli clone (shorty version with full stock) Changed the short magazine tube & outer barrel for one from a Benelli M1014 (some minor alterations - namely drilling a few places) Stuck an ACM Metal heatshield from a Mossberg M500, took the rear sights from the M1014 and retapped them to the M3 receiver (but didn't want to put the picatinny rail on - wanted the sights to be similar to the Benelli Nova SP) Placed a barrel clamp from a full sized Benelli shotgun for extra stability and cut the stock tube at the rear and placed a "Tilt n' slide" M1014 stock on there. Only sacrifice i had to make was the front sling mount (as i'd put it all back together before i realised i'd not put it on) Might put it on at some later date but at present i'm happy with it. Also made a "Pump non-slip-grip" for the pump (like the ones you see on the shorty cruiser style shotties to stop your hand from sliding off the pump and being blown off) Works very well and doesn't affect the operation in any way. Pump is a tad stiff again through the heatshield, but it's starting to soften up again with use. :D

 

Only things i'm planning now (which will be at a later date -- funds permitting) is to fit a Taclight to the magazine tube with a long pressure switch and a sidesaddle shell holder.

Share this post


Link to post
Share on other sites

nice work, rhino!

 

i personally hate the 1014. with a passion...

 

but this looks a bit more acceptable to my tastes!

 

bravo!

Share this post


Link to post
Share on other sites
thats actually an M3 S90 with M1014 sights, mag tube cap and stock.

 

could be why i like it a bit then?

 

still hate that stock though!

Share this post


Link to post
Share on other sites

was gonna take it off and just have the pistol grip (would probably just involve putting some washers or something in the grip to make the hex bolt hold it better) I've also tried putting my "Shorty" grip and fullstock back on it after i cut the stock nub down (the bit that sticks out the back of the M3 and secures the stock) and it's a good clean fit with no wobble and no worry about "Stressing" the grip/stock in any form.

 

@ShotgunSteven - He's sorta right. This was a Benelli M3 "shorty" and i replaced certain parts with the M1014's barrels, stock and sights (i don't like the M1014 pump - personal preference :D ) I was originally inspired by the single shot version that they sell over on RSOV and thought "i'd like that... but firing triple rounds instead of single" ;)

Share this post


Link to post
Share on other sites

I do like the M3, as well as the M4. If they had sold a version of their M3 with the M4 sights, I'd have totally bought that instead, simply because a pump action M3 is more realistic than a pump action M4... but perhaps I can email Benelli and tell them to put out some pump-action M4's. /sarcasm

Share this post


Link to post
Share on other sites

Now for something completely different. :D

 

SPAS purists, please turn off your monitors, now.

 

Completely sawn-off SPAS 12 with custom barrel mount RIS, M6 laser/torch combo attached with a high MP5 RIS. Its actually more effective than its ever been.

 

http://img232.imageshack.us/my.php?image=53383825.jpg

 

http://img67.imageshack.us/my.php?image=90117894.jpg

 

http://img155.imageshack.us/my.php?image=28156933.jpg

 

http://img149.imageshack.us/my.php?image=004hix.jpg

 

http://img299.imageshack.us/my.php?image=005bhb.jpg

 

Last pic was before the MP5 RAS was attached.

post-51601-1242770582_thumb.jpg

Edited by H.U.N.K

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.