mightyjebus Posted December 21, 2017 Report Share Posted December 21, 2017 decided to paint the GE M870 so that most of the parts matched. I used Halfords FDE then a coat of clear matt varnish (Halfords) to seal the finish. I've got a new top rail coming in the post so the current G&P one on there will be replaced. 2 Quote Link to post Share on other sites
SpecialWeaponsAndPlastic Posted December 21, 2017 Report Share Posted December 21, 2017 Decided to fix the double feeding issue on my CAM870P, and this is the result: 2 Quote Link to post Share on other sites
Got Wood? Posted January 4, 2018 Report Share Posted January 4, 2018 Had to glue the side carrier on as the holes don’t line up on spring versions which is a shame. Also the dummy feed tube actually fits 2 more shells inside. Padded it out to stop the rattling but nice to have emergency spares. Front sight stolen from my spares box from an ACM M500 but looks good I think 3 Quote Link to post Share on other sites
mightyjebus Posted January 4, 2018 Report Share Posted January 4, 2018 Golden Eagle M870 Sebru 5 shells worth of BB's with each charge. Gas is held in the pistol grip and cooldown is minimal due to the heat of your hand on the grip. Grip will fit other GE M870's but not the TM models. I haven't had a chance to see what stops it fitting but I'll investigate. 4 Quote Link to post Share on other sites
Got Wood? Posted January 4, 2018 Report Share Posted January 4, 2018 That is noice Quote Link to post Share on other sites
judgeman Posted January 5, 2018 Report Share Posted January 5, 2018 Added a PVC extension to mine cause I got big *albatross* hands. Quote Link to post Share on other sites
mightyjebus Posted January 5, 2018 Report Share Posted January 5, 2018 and with a bit of filing you can fit the GE grip to the TM breacher 1 Quote Link to post Share on other sites
Got Wood? Posted January 5, 2018 Report Share Posted January 5, 2018 (edited) Well that is neat. I definitely want now. Did I read right that these are only 3 shots, and can’t switch to 6? Edited January 5, 2018 by Got Wood? Quote Link to post Share on other sites
mightyjebus Posted January 5, 2018 Report Share Posted January 5, 2018 3 or 6 shot and I just double checked (anything to fire this thing again) 1 Quote Link to post Share on other sites
MODDAN Posted January 6, 2018 Report Share Posted January 6, 2018 Decided to fix the double feeding issue on my CAM870P, and this is the result: *youtube linky* Just tried this on my double-feeding 14-inch SWAT, and it works great! I just held the shell latch arm with two pliers and bent it to submission. Would not recommend that method to anyone else, since it is rather hit-or-miss, but I was lucky. And it does require some serious effort to bend the arm... Quote Link to post Share on other sites
judgeman Posted January 12, 2018 Report Share Posted January 12, 2018 Installed a real Vang Comp speed saftey on my Serbu. Slight dremmel to fit but no real issue. 2 Quote Link to post Share on other sites
SpecialWeaponsAndPlastic Posted January 25, 2018 Report Share Posted January 25, 2018 Made my own video on how to disassemble a CAM870 trigger group: And in more good news, we now have a custom YouTube address: https://www.youtube.com/specialweaponsandplastic Make sure to follow us on Minds as well: https://www.minds.com/specialweaponsandplastic 2 Quote Link to post Share on other sites
SpecialWeaponsAndPlastic Posted February 22, 2018 Report Share Posted February 22, 2018 Bought myself a G&P Masterkey kit for an upcoming project: 2 Quote Link to post Share on other sites
jez Posted March 2, 2018 Report Share Posted March 2, 2018 My twin Tanakas Sent from my SM-G955F using Tapatalk 2 Quote Link to post Share on other sites
Roland1014 Posted March 2, 2018 Report Share Posted March 2, 2018 Why doesn't anyone have the Dominator International 870? Quote Link to post Share on other sites
MODDAN Posted March 2, 2018 Report Share Posted March 2, 2018 Many reasons, I guess. First off the Dominator is wrong on many areas. The ejection port, the weird cramped barrel... that was the first thing that put me off that platform. And also, for me, it's the fact that it is a Tanaka clone. Say what you want about the Tanaka shotguns. They look great, they have lots of metal components, but they are really more showpieces than actual skirmish guns. Mine underwent several reparations before I sold it on, and the inner barrel design coupled with limited BB's is really a let down for me. The reach may increase slightly over an APS shotgun, but the added realism of shooting slugs (which may or may not be appropriate) out of a CAM870, and being able to vary my ammo more than BB weight makes it more worth while than a Tanaka, PPS, Dominator, or any other gun of that denomination. Quote Link to post Share on other sites
blobface Posted March 3, 2018 Report Share Posted March 3, 2018 (edited) Why doesn't anyone have the Dominator International 870? I got one converted to APS shells, it's excellent, made my APS(s) feel like toys in comparison, sold my APS shotguns as a result while keeping the shells for this platform, will likely build another one based on the sawn off model. This is work in progress, it will eventually have a Vang Comp sight set (which I have had for years and never found the right gun to install on until now), Cerakoted and have the ports drilled. Surefire 618LMG and Hogue Shortshot stock, 7+1, with a take down pin mod that's also WIP, hence rough finish around that area. Edited March 3, 2018 by blobface 4 Quote Link to post Share on other sites
AG1212 Posted March 3, 2018 Report Share Posted March 3, 2018 How difficult is it to convert a Dominator 870? Quote Link to post Share on other sites
blobface Posted March 3, 2018 Report Share Posted March 3, 2018 I honestly don't know as I bought the Dominator already modded by CRW, so I don't have the original to compare with to see what they actually did. According to a few friends in HK who do airsoft 3 gun, apparently it isn't as straight forward as removing the inner barrel... not sure how much that says about the difficulty and CRW gets a fair bit of business doing that conversion. 1 Quote Link to post Share on other sites
SpecialWeaponsAndPlastic Posted March 3, 2018 Report Share Posted March 3, 2018 It does not look that hard to do. I had a look at the bolt from a friends Dominator 870 and compared it to my own APS bold, and it did not look overly difficult to convert it from Tanaka-style shells to APS standard. I am planing to make a video on the subject during this season, but I don't know exactly when. 2 Quote Link to post Share on other sites
druid799 Posted March 8, 2018 Report Share Posted March 8, 2018 Now this has arrived how to make it my own ????? 2 Quote Link to post Share on other sites
shmook Posted March 8, 2018 Report Share Posted March 8, 2018 Put a wood stock on and convert it to single shot 2 Quote Link to post Share on other sites
druid799 Posted March 9, 2018 Report Share Posted March 9, 2018 (edited) Put a wood stock on and convert it to single shot Wonder if I could convert it to run on mini magazines that’ll stick out the bottom???? Lol ! Edited March 9, 2018 by druid799 1 Quote Link to post Share on other sites
blobface Posted March 9, 2018 Report Share Posted March 9, 2018 It does not look that hard to do. I just bought the sawn off kit for the DM870, so I will be converting that to work with my APS converted DM, will upload some info of the conversion, I'm going to guess it's just dremel and violence for the barrel conversion. 3 Quote Link to post Share on other sites
Cesare Posted March 9, 2018 Report Share Posted March 9, 2018 (edited) I just bought the sawn off kit for the DM870, so I will be converting that to work with my APS converted DM, will upload some info of the conversion, I'm going to guess it's just dremel and violence for the barrel conversion.Really liked that kit I have a RS shockwave Raptor grip that I love but it is only for Mossberg 500. Tried to find another but seems impossible here in Sweden. Is there not many modifications beside the bolt and barrel? The receiver and magtube? Edited March 9, 2018 by Cesare Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.