Jump to content
Hoppum

Pics of your Gear

Recommended Posts

My light loadout for the GZ weekender, i've mugged off my plate carrier etc and stripped down to the essentials.

 

My trusty ancient Warrior 901 rig with an assortment of Warrior + Bulle pouches

weekenderloadout1.jpg

 

Whats in it. Namely mags, x8 monocular, radio (rarely used, normally switched off unless i need to locate friendlies), wolf eyes torch, bbs and spare batteries

weekenderloadout2.jpg

 

Belt kit, consisting of sidearm, extrema ratio training knife and more ammo.

weekenderloadout3.jpg

 

For hydration i will be using a camelbak.

 

Darkchild

Share this post


Link to post
Share on other sites

nope, one of these

gzshirt.jpg

 

pair of these

gzbottoms.jpg

I already own them but cant be arsed to take pictures.

 

And my old dutch dpm cap.

 

I think most of the team are going for woodland bdus.

 

Darkchild

Edited by darkchild130

Share this post


Link to post
Share on other sites

Why not move the leg pouches to the rig, Darkchild? Plenty of room on it. But I am a person who likes everything on the rig. Operator(x3) preference of course.

 

You should get Ranger plates for the PMAGs. I got some and they work amazing in open top pouches. I like them because theyre abit smaller then normal magpuls.

Edited by Mr Foxhound

Share this post


Link to post
Share on other sites

I keep my chest rig low profile for crawling. I like leg rigs.

 

I can draw and load my mags faster without magpuls of any kind (took me a while to figure that out but i can). The only reason i kept using them was to stop the elastic slipping from my open pouches. Then i thought

"Why not remove the elastic?"

So i did.

 

Darkchild

Share this post


Link to post
Share on other sites

I guess its depends on the pouch and how tight they are. I reload way faster with magpuls with my Eagle rig pouches.(Which are very tight) Different strokes for different for, i guess. Haha

 

I like keeping things simple I suppose.I think magpuls would make mags easier to tug out when crawling. Imo, Magpuls are made to reload faster, you must be doing it wrong

Edited by Mr Foxhound

Share this post


Link to post
Share on other sites

Without trying to sound big headed, after nearly 10 years as an infantry section commander/sniper/jungle warfare trained/covert recon trained/regular recon trained/armoured recon trained/airborne trained/advanced cqb trained etc etc soldier, i can assure you im not doing it wrong.

 

I simply change mags faster without magpuls. Even more so with the pmags, as the little lip on the bottom plate gives my fingers extra purchase when yanking them from their pouch.

And i dont actually think my rig could get any simpler without removing something i need.

 

Again, i dont want to come accross as big headed, i just point out my experience to illustrate that i know what works for me. Im not saying my way's good for everyone, but i like it :)

 

Thanks for your comments though, its always nice when someone shows an interest in what you're doing!

Will probably dress up next week when im bored and post pics of my setup.

 

Darkchild

Share this post


Link to post
Share on other sites
Anyone have any pictures of their rigged up MOLLE LBEs? Mainly the Blackhawk or similiar versions.

Will have my Blackhawk one done up soon. I can describe the planned pouch layout. Just trying to bargain bin as much of it as i can

Planned used is for long scenarios out in the woods

4x HSGI Universal Pouches, 2 to each side front and center

2x LBT 1Qt canteen covers mounted 1 each to rear of the side panels

1 HSGI 2QT/Utility Pouch to uss as a buttpack or for canteen(depending on if i am toting my ruck)

Back Panel is empty so i can use a ruck and to free up back for breathing

Spec Ops Oporder Pouch on left side behind mag pouches

Spec Ops Large Medical on right side behind mag pouches

Emdom Strobe Pouch Upper left shoulder

 

Dont think ill have too much more room if any, no need to carry more than that really

 

That is essentially what i have planned, i need to find a way to beat up the LBE itself, the thing is so new and crispy I would say it was starched, maybe ill throw it in the wash cycle to soften it up. Need to replace floatation panels so its not 1.5 inches thick before pouches

 

 

Yes and Foxhound dont preach to people about how they run their kit.

Edited by Azulsky

Share this post


Link to post
Share on other sites

I's lurves mah RLCS <3

 

(clicky for larger pictures)

 

normal_P8164248.jpg

Glorious kitbag :)

normal_P8164249.jpg

normal_P8164250.jpg

normal_P8164264.jpg

RRS-V

normal_P8164261.jpg

Rear Plate Carrier

normal_P8164262.jpg

PACA... After eight months on the hunt, I had to get a repro one, unfortunately...

normal_P8164251.jpg

normal_P8164252.jpg

2x frag grenade, single M4

Edited by Pkekyo-Nor

Share this post


Link to post
Share on other sites

"more pictures than allowed"....

 

 

normal_P8164254.jpg

MBITR, single M4

normal_P8164255.jpg

Rear Plate Carrier Adapters, M4 shingle

normal_P8164257.jpg

Slung Weapon's Catch

normal_P8164256.jpg

Admin pouch

normal_P8164260.jpg

Hydration Carrier

Share this post


Link to post
Share on other sites
Will have my Blackhawk one done up soon. I can describe the planned pouch layout. Just trying to bargain bin as much of it as i can

Planned used is for long scenarios out in the woods

4x HSGI Universal Pouches, 2 to each side front and center

2x LBT 1Qt canteen covers mounted 1 each to rear of the side panels

1 HSGI 2QT/Utility Pouch to uss as a buttpack or for canteen(depending on if i am toting my ruck)

Back Panel is empty so i can use a ruck and to free up back for breathing

Spec Ops Oporder Pouch on left side behind mag pouches

Spec Ops Large Medical on right side behind mag pouches

Emdom Strobe Pouch Upper left shoulder

 

Dont think ill have too much more room if any, no need to carry more than that really

 

That is essentially what i have planned, i need to find a way to beat up the LBE itself, the thing is so new and crispy I would say it was starched, maybe ill throw it in the wash cycle to soften it up. Need to replace floatation panels so its not 1.5 inches thick before pouches

 

 

Yes and Foxhound dont preach to people about how they run their kit.

 

What were you going to replace the foam with?

 

In my experience it doesn't like to fit unless you have foam or remove the back panel.

Share this post


Link to post
Share on other sites

Camping Mat is more pliable than the foam i have.

I'm having internal arguments about the usefullness of the rig since once you remove the rear panel it becomes a MAV, or about replacing it with the LBT/DBT version of the rig

Share this post


Link to post
Share on other sites

My Russian loadout :P

 

IMG_0310.jpg

 

- Flora BDU

- M23 Pioneer In Les

- VDV Beret

- Dboys AKS74U (Full steel version)

- VSR Cap

- Blue Telnyashka

 

Going to pick up a 6sh92-5 soon

Edited by Cubeman

Share this post


Link to post
Share on other sites

I'm still planning to get my hands on a RLCS once the opportunity presents itself, so why would I spend arseloads of monies on just another incorrect PACA...

 

It's not as though repro kit will give you AIDS, it ain't all as bad as what ebaybanned presents you ;)

Share this post


Link to post
Share on other sites

Yeah I thought it may have been it or close. I have seen Triad sell other stuff that is only available there like when the DEMO pouch in RG was all the rage on wannabe or some stuff like that.

 

 

-Ryan

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.