badsailor Posted November 14, 2013 Report Share Posted November 14, 2013 where can one purchase these magical rods?! Not sure outside of Japan where they can be bought. Sorry. If you want some hit me with a PM and maybe I can get you a set. Like the idea of the drop in rods but tamiya's realy are poop , you do need to change to deans or some other connector . Noted an increase in all aspects of battery use when I did and I've never met any one who wasn't glad they'd done the same as well . If you need conclusive proof just google tamiya V deans there's LOTS out there . Absolutely agree, I even changed out the Tamiya connectors on the rods in my earlier post with Deans, but for people who don't know how/are afraid/can't soldier the rods work great Quote Link to post Share on other sites
Pdubyuh Posted November 14, 2013 Report Share Posted November 14, 2013 Bad Sailor the "rods" look pretty interesting but i have not had any problems with my adaptor I got 2 of these -http://www.componentshop.co.uk/7-4v-800mah-20c-continuous-discharge.html with deans and one lasts 1/2 day just pop the other in the other side of the stock and off you go. For £8.25 a battery you could get 5 for the price of an original TM battery and for a totally drop in solution its pretty good. I'm sure the other options work as well if not better but if you dont want to do any soldering and leave your gun as it is out of the box its pretty good. Quote Link to post Share on other sites
macocosta Posted November 15, 2013 Report Share Posted November 15, 2013 wish i can afford one of this, TM totally reliale Quote Link to post Share on other sites
VIPER-GR Posted November 19, 2013 Report Share Posted November 19, 2013 quick question, which SPR style pistol grip FITS to Marui M4? I just installed one and its suberb, but i cant remember the brand of it. Quote Link to post Share on other sites
sunburnthammer Posted December 9, 2013 Report Share Posted December 9, 2013 Hi all, Just upgraded my SOPMOD to about 330 fps from stock with a eagle six spring, new gears etc and got a mosfet fitted at the same time. Tried it out for the first time yesterday and the range has dropped quite dramatically. I had to put the hop all the way on to get anything out of it. Anyone else suffered similar problems and have any solutions? Cheers Sent from my iPad using Tapatalk HD Quote Link to post Share on other sites
Berggy Posted December 10, 2013 Report Share Posted December 10, 2013 Hi sunburnhammer. Did u toyed with the hopup as well? If not, try disassemble the gearbox and and check the tappet. Sent from my GT-I9300 using Tapatalk Quote Link to post Share on other sites
ikliiu Posted December 10, 2013 Report Share Posted December 10, 2013 Check your inner barrel too, a dirty barrel might cause this. Quote Link to post Share on other sites
sunburnthammer Posted December 10, 2013 Report Share Posted December 10, 2013 Hop wasn't touched, barrel is clean too. Hop full on with .25's was giving an fps of around 270 Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
Berggy Posted December 10, 2013 Report Share Posted December 10, 2013 There is definitely something wrong with 27x fps for .25 bbs?Stock gives ~94mps around 300fps Sent from my GT-I9300 using Tapatalk Quote Link to post Share on other sites
SixtyNiner Posted December 10, 2013 Report Share Posted December 10, 2013 (edited) It could be your air nozzle and tappet plate fitting. It's easy to put the air nozzle in out of alignment. There's a bump in the air nozzle that needs to sit in a notch on the tappet plate. Or if your gun is front wired the hop unit could be pinching a wire, pushing the hop to the side slightly. I've had trouble with this, it's very tricky getting the wires out the front of the gun without them getting caught somewhere. Edited December 10, 2013 by SixtyNiner Quote Link to post Share on other sites
sunburnthammer Posted December 10, 2013 Report Share Posted December 10, 2013 Yes it is front wired so it could be that Sent from my iPhone using Tapatalk Quote Link to post Share on other sites
Richard Y Posted December 10, 2013 Report Share Posted December 10, 2013 range = power + spin. logically.. could be just bad timing, and your rubber is worn now so needs more hop to put more spin on it, could be the weather cuasing the rubber to be harder thefore less tack therefore less spin. Could be the power levels, are you sure they arnt less now than they where before? Thoretically things skrink in winter, so cold environments should give you a lower fps reading during game play than on the at home chrono. lots of potentially effecting factors. Quote Link to post Share on other sites
TheFull9 Posted December 15, 2013 Report Share Posted December 15, 2013 (edited) Anyone have any recommendations at all for stocks (or modification work to the buffer tube?) other than the TM ones that'll lock nicely on these guns? I'm going through an update on the SOCOM I first picked up and I know the RS or PTS MOE stock functions nicely, but everything else seems to encounter issues. I'm not sure whether it's the depth or the diameter but the locking position holes running along the bottom of the TM buffer tubes aren't as large as they would be on a real buffer tube. On the MOE stock this is alright; the locking detent doesn't sit fully home so the adjustment lever has a little bit of wiggle room but since it's plastic on plastic and fit closely it doesn't make a rattling noise when you run. On any Magpul stock with the friction lock however the way the detent sits (i.e. not as far in as it should) prevents the lever on the friction lock clicking in to place and it gets stuck about 70% of the way which is annoying and just looks a bit rubbish to me personally. On non-Magpul stocks you end up with the adjustment lever flapping around as you move which is even more annoying. I'm tempted to just go with the MOE stock since they're comparatively cheap and do work, but and since I just installed a mid-length MOE handgaurd and will be installing the MOE pistol grip I'm going to end up with a gun that just looks like the PTS ERG Scout. Not that that's such a bad thing but it kinda feels like a wasted effort then. Edited December 15, 2013 by CKinnerley Quote Link to post Share on other sites
PureSilver Posted December 15, 2013 Report Share Posted December 15, 2013 Depends. If you're feeling brave you can pull the stock tube, have it lathed down slightly, painted, and fit a UBR. For less work, you can buy the ARS endcap (a worthwhile upgrade in terms of quality, too) and fit an A1/A2-or-similar fixed stock - very cool for SPR Mk.12 Mod.0 clones. Quote Link to post Share on other sites
TheFull9 Posted December 15, 2013 Report Share Posted December 15, 2013 Good options don't get me wrong, but it's a collapsible stock in the traditional configuration I'm after. Quote Link to post Share on other sites
Richard Y Posted December 16, 2013 Report Share Posted December 16, 2013 i think all fit but you have to remove the pin on the stocks and shorten it. those it wont be poking out and the adjustment lever flapping. Quote Link to post Share on other sites
TheFull9 Posted December 16, 2013 Report Share Posted December 16, 2013 Yeah I've not had a problem with general fitment it is just the locking pins. Any idea how thick the metal is on the buffer tube i.e. between the inside and the surface in each locking hole that the stock's pin sits against? As in would a drill just fly right through in to the tube and wreck it (in which case as you say it's going to be better to shorten the pin on the stock) or could some material be removed? Quote Link to post Share on other sites
JCheeseright Posted December 16, 2013 Report Share Posted December 16, 2013 I'd expect a decent amount of space under the detents on a SOCOM, in a SOPMOD obviously the wires are hidden underneath but with a SOCOM I'd be willing to bet a fair amount it's just a void because Marui will have used the exact same buffer tube with a different bit underneath so you don't have the battery contacts at the end. Quote Link to post Share on other sites
TheFull9 Posted December 16, 2013 Report Share Posted December 16, 2013 I did not think of that. All the guns I've got are SOCOMs so I've never really looked in any depth at the way the wiring's setup in the tube of a gun that uses the in-stock battery. I shall investigate further next time I can get hands on one of my rifles. Quote Link to post Share on other sites
JCheeseright Posted December 16, 2013 Report Share Posted December 16, 2013 If I'm right and the stock tube is the same, you've got probably 3-4mm extra space if you drill out the holes. Quote Link to post Share on other sites
Lord Vader Posted December 16, 2013 Report Share Posted December 16, 2013 Regarding the friction lever on Magpul stocks, I can only say that my RS (non-PTS) CTR stock fits perfectly on my Socom, all levers close completely and nothing is wobbling or flaping around. This might or might not be helpful for you, but I thought I let you know. Quote Link to post Share on other sites
Zereck Posted December 16, 2013 Report Share Posted December 16, 2013 Anyone know where can I get a SURUS recoil weight? I bought the CNC buffer tube for it from Echigoya a few months ago but they were out of stock of the SURUS back then. I asked them if they make new ones and they replied "soon" but that was a while ago so I started looking around but found nothing. Quote Link to post Share on other sites
arne71 Posted December 17, 2013 Report Share Posted December 17, 2013 I`ve asked asked the same question about their cnc products, but they`ve never replied. But since Echigoya is located in Japen, maybe "soon" is a little bit quicker than in the rest of Asia. Quote Link to post Share on other sites
Richard Y Posted December 17, 2013 Report Share Posted December 17, 2013 Pretty damn thin... like i say, id remove this .. and the pin from the stock.. then offer up the pin to the holes, id make sure it actually fits in first. if it does fit the od isnt the issue but length must be, so then i would shorten the pin. The benifit of shortening the pin on the stock would be making a low cost aeg stock compaitble with all your recoil shocks. if memory serves its only about 1mm thick so at most youd be shaving 0.1 - 0.5 out of each hole. if its flapping that much youll need whole mm's .. Quote Link to post Share on other sites
Richard Y Posted December 17, 2013 Report Share Posted December 17, 2013 unfortuantly im not getting replys from ARS, so whats out there at the moment is all thats left until they make more, all echigoyas custom items are made by them, so if there listings are out they will be until ars start making again. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.