Staceh Posted February 10, 2011 Report Share Posted February 10, 2011 Still run rings round you sweetcheeks. When are the twins due btw? Quote Link to post Share on other sites
White_Rabbit Posted February 10, 2011 Report Share Posted February 10, 2011 hehe only when im sleeping old man only when im sleeping and thats muscle BTW Quote Link to post Share on other sites
Staceh Posted February 10, 2011 Report Share Posted February 10, 2011 Has it slipped down from your head? For anyone thats thinking of getting upgrades done, goto Richard, after watching him work on my SOCOM last night i was well impressed with his care and attention to detail. The batteries i bought from him were top quality too. 10/10 Quote Link to post Share on other sites
Mad-Larkin Posted February 10, 2011 Report Share Posted February 10, 2011 (edited) wuss, do it urself! cept for a few fiddly bits, probably the nicest rifle to work on i've found so far what u had done then stace? Edited February 10, 2011 by Mad-Larkin Quote Link to post Share on other sites
kithooton Posted February 10, 2011 Report Share Posted February 10, 2011 What is the standard size of a sopmod barrel.? Replacing it with a tighter barrel, will this increase Fps (5-10fps) Better Accuracy? How tight can you go? 6.03-6.02-6.01-6.00? 1 Quote Link to post Share on other sites
Staceh Posted February 11, 2011 Report Share Posted February 11, 2011 socom? Durrrrrrr SOPMOD, thats better. Spring upgrade and battery pack cell replacement. And what a difference, ROF has nearly doubled, trigger response is amazing, I'm well impressed, cannot wait to give it a run out tommorow. Quote Link to post Share on other sites
White_Rabbit Posted February 11, 2011 Report Share Posted February 11, 2011 see old age creeping in there Quote Link to post Share on other sites
Richard Y Posted February 11, 2011 Report Share Posted February 11, 2011 kind words there hehe im blushing then my ego kicks in and i sit back basking in my awesomeness Those high powered cells just deliver so much more power. --------- Side note - AK's ... Not really touched this subject yet as well no ones really sent one through unitll now. I know the springs work fine as they are the same size as the sopmod mod. My point the recoil, its a bit weak.. i mean weak like a wet fart. it feels ok when firing but the mechnism flaps about looser than a wand up gandolfs sleve. Im thinking 100% i need to do a recoil spring for this lol Quote Link to post Share on other sites
naff44 Posted February 11, 2011 Report Share Posted February 11, 2011 Im thinking 100% i need to do a recoil spring for this lol i will have one of these as soon as they're done Quote Link to post Share on other sites
Isamu Posted February 11, 2011 Report Share Posted February 11, 2011 Ok gentlemen, I have a little problem with my Army SOPMOD, maybe this is not the exact place to ask but here it is, I have dissasembled the upper reciever to the point only the upper and the outer barrel are attached to each other, but the outer barrel doesnt come off, dont know if it should slide freely, if theres usually some kind of compund or a screw I havent seen... I have tried to heat the barrel to soften the compound (if there is one) tried with plyers and nothing, it wont budge, any idea? thanks Quote Link to post Share on other sites
Richard Y Posted February 11, 2011 Report Share Posted February 11, 2011 should just pull out.. pic ? Quote Link to post Share on other sites
Isamu Posted February 11, 2011 Report Share Posted February 11, 2011 I have no camera ATM but its just the upper and the outer barrel, if you say the TM should slide freely... well, then there something more in the Army, maybe the barrel is slightly thicker and I will suffer a hell of pain and tears to separate them Quote Link to post Share on other sites
Richard Y Posted February 11, 2011 Report Share Posted February 11, 2011 from what i gather they are identical, it literally just slips in then the collar you put on to the barrel first slides down and you screw it in place, if you ve remcoeved the screw and collar it should pull out. maybe steriods and some working out could be on the cards Quote Link to post Share on other sites
Isamu Posted February 11, 2011 Report Share Posted February 11, 2011 A bit of working out is on the list but steroids... well.. not healthy Now in all seriousness I already tried with some big pliers and even after putting enough force to leave visible dents, i got nothing, maybe I didnt put enough force in fear to break something, which I would want as the upper is basic in building my SBR project... Quote Link to post Share on other sites
Interficium Posted February 13, 2011 Report Share Posted February 13, 2011 AWS got back to me and said we can expect to see V2 and V3 sopmod stealth trigger fets by the end of the month. Quote Link to post Share on other sites
Kunlun Posted February 13, 2011 Report Share Posted February 13, 2011 Took my M4 SOCOM to her first skirm yesterday .... and I LOVED it!!! Quote Link to post Share on other sites
Singuy Posted February 13, 2011 Report Share Posted February 13, 2011 (edited) Can somebody tell me what this is and if it's impt? This little piece fell out of my tm sopmod when I was dry firing with the magazine out(so I am assuming it fell out of the mag well?). I went outside and dumped 82 rounds without this part and the gun performs without a problem. Is this pin important? Where does it belong? Edited February 13, 2011 by Singuy Quote Link to post Share on other sites
elanaiba Posted February 13, 2011 Report Share Posted February 13, 2011 Size? Do you have proper hopup? Quote Link to post Share on other sites
Singuy Posted February 13, 2011 Report Share Posted February 13, 2011 Yup, the hopup is working fine after 82 rounds. It was not resetting itself..all the bbs hopped perfectly. The size is about 1cm long by 1mm wide. Quote Link to post Share on other sites
Lord Vader Posted February 13, 2011 Report Share Posted February 13, 2011 New barrel from PDI: www.x-fire.org Too bad I ordered a Daniel Defense RIS II now, does anyone need a URX II rail? ^^ Quote Link to post Share on other sites
Isamu Posted February 13, 2011 Report Share Posted February 13, 2011 New barrel from PDI: www.x-fire.org Too bad I ordered a Daniel Defense RIS II now, does anyone need a URX II rail? ^^ Nice, But 10.5 FTW! Quote Link to post Share on other sites
elanaiba Posted February 13, 2011 Report Share Posted February 13, 2011 The new barrel is 11.5", nice Lots of new options, just as I improvized a ~12.5" barrel from a Laylax 10.5 + extension + KAC muzzle brake. 363mm inner barrel + quasi-compact barrel = win. Quote Link to post Share on other sites
Singuy Posted February 14, 2011 Report Share Posted February 14, 2011 Can somebody tell me what this is and if it's impt? This little piece fell out of my tm sopmod when I was dry firing with the magazine out(so I am assuming it fell out of the mag well?). I went outside and dumped 82 rounds without this part and the gun performs without a problem. Is this pin important? Where does it belong? So I take it no one knows what this is? Quote Link to post Share on other sites
Staceh Posted February 14, 2011 Report Share Posted February 14, 2011 Used my SOPMOD after its richard upgrades. Wow, just wow!! Quote Link to post Share on other sites
Number5 Posted February 14, 2011 Report Share Posted February 14, 2011 (edited) So I take it no one knows what this is? Honestly mate I've been sat thinking about this for a good few minutes and the only thing I can think is it's either: a) the bar from the hop arm which has somehow come lose or just a left over piece of 'flash' from the manufacturing process thats been left in, or, has fallen in only to subsequently fall out. I know thats not helpfull but it may put your mind at ease abit, especially seeing as though the RIF still works! Edited February 14, 2011 by Number5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.