xEnterSandmanx Posted May 16, 2009 Report Share Posted May 16, 2009 http://www.armytimes.com/news/2009/05/army_scar_051109w/ It's going to replace the MK11 and MK12? I'd like to see that happen... Link to post Share on other sites
PynkPanthyr Posted May 16, 2009 Report Share Posted May 16, 2009 Alright, just wait a few years. Link to post Share on other sites
Carter Posted May 16, 2009 Report Share Posted May 16, 2009 Well shoot, guess its time to update my gun as well as my gear! Link to post Share on other sites
PianoBlack Posted May 16, 2009 Report Share Posted May 16, 2009 They're been planning to replace the mk11 and mk12 since at least 2006 according to the PDFs that I've run across. -Piano Link to post Share on other sites
aznsk8s87 Posted May 16, 2009 Report Share Posted May 16, 2009 So... The SCAR is pretty much doing what the M14 was supposed to do when it was first introduced back in the 50's/60's? Link to post Share on other sites
D0LCE Posted May 17, 2009 Report Share Posted May 17, 2009 Well shoot, guess its time to update my gun as well as my gear! maybe you should hold off a bit more is to come soon. Link to post Share on other sites
scooberoo Posted May 18, 2009 Report Share Posted May 18, 2009 My ranger impression. It's not that accurate. I'm still waiting on some mag and medic pouches. Link to post Share on other sites
M4A1lover Posted May 18, 2009 Report Share Posted May 18, 2009 Kit list? Link to post Share on other sites
Titleist Posted May 18, 2009 Report Share Posted May 18, 2009 Really, besides there being RG gear, this doesn't look like a ranger rig at all. Looks like this really was more of a SWCC rig. *shrugs* Link to post Share on other sites
scooberoo Posted May 18, 2009 Report Share Posted May 18, 2009 U still got the rbss? Ahh i want one for my kit. Link to post Share on other sites
Titleist Posted May 18, 2009 Report Share Posted May 18, 2009 Yes I do. I got that thing for so cheap you'd *suitcase* a brick. Again this looks like a SWCC rig. Tons of stuff that's off, like the helmet, layout of the 2nd line, gun setup, etc. Again drop this in the SEAL thread and I think you'd have a winner. Link to post Share on other sites
Shardik Posted May 18, 2009 Report Share Posted May 18, 2009 I like it, i love US WC with molle, but i agree, its more 'SEALS' than anytihng, bar the colours Link to post Share on other sites
Pkekyo-Nor Posted May 18, 2009 Report Share Posted May 18, 2009 So I decided to fiddle about with my RLCS RRS-V a bit, and ended up with this... (as always, clicky for larger pictures) And a family shot Have allready gotten rid of the double M4 pouch on the shingle... Link to post Share on other sites
Hispeed1 Posted May 18, 2009 Report Share Posted May 18, 2009 Nice pics Scoob-glad to see you posting againg. Replica foliage green PACA-for your guises RG RRV's perhaps? Alternative to the tan ones. http://ebaybanned.com/product_info.php?cPa...roducts_id=2247 Link to post Share on other sites
scooberoo Posted May 18, 2009 Report Share Posted May 18, 2009 thanks guys. man i only got a black pantac paca. but ill need rbss, this vest is too bulky. yeah i guess looks swickish. damn mag pouches are 2 weeks delayed. titleist, did the rbss come with sewn-in soft armor? Link to post Share on other sites
Titleist Posted May 18, 2009 Report Share Posted May 18, 2009 Mine, yes. Came with the two panel choices. Link to post Share on other sites
Shardik Posted May 19, 2009 Report Share Posted May 19, 2009 KA replica PACA's are good eonough quality, they do a Green one also. Link to post Share on other sites
SWE_Thompa Posted May 19, 2009 Report Share Posted May 19, 2009 Ok some update *Moved lighsticks to right side on the lower part. tied them upp with rubber band so they dont move around( rubber band is attached to MOLLE as well so they dont djump out *cleaned all stuff of the right side so the right arm is now totally free for the MK46. *added CAT on the left side - I still need the duck tape over the buckles to hide the fact that the backplates buckles are black, that will go away when I buy the Eagle RRV Back plate. - I have destroyed my PC148 copy so right now I only have the Puxing radio there. - Gonna get the RLCS RRV - Backplate straps and replace the civilian that I have now. - MBITR pouch will be replaced with a RLCS in the future - Gonna add a Signal pouch on the foldable part of the RRV. and a question, looking at the MSA sordins they are expensive as hell. Is there a airsoft copy around or is there anything else that would substitute for the MSA Sordins? Link to post Share on other sites
pforcerecon Posted May 19, 2009 Report Share Posted May 19, 2009 Shop Ebay for some Sordins, most the time you can find a decent deal, unless someone outbids ya. Link to post Share on other sites
Gentner91 Posted May 19, 2009 Report Share Posted May 19, 2009 Here is a little update of my RRV. EI RRV ESAPI 7.62 APM2 Plates (Brand New, Never Fielded) Kitlist Eagle Industries RRV Eagle Industries RLCS* M4 Open Top Shingle Eagle Industries RLCS* Admin Eagle Industries Single Mag Pouch Eagle Industries Canteen Pouch Eagle Industries Medical Pouch ESAPI 7.62 APM2 Plates (08/2006) x2 MSM Pirate Flag Patch MSM Infidel Patch Still Need EI Backpannel EI Single Mag Pouch EI Frag Pouch EI Hydro Carrier Riggers Belt * May not be actual RLCS issue, but its close enough in apperence to to RLCS Issue. Link to post Share on other sites
TheLair Posted May 19, 2009 Report Share Posted May 19, 2009 Ok some update If your right handed, why don't you move the radio to the other side and move those SAW pouches more to the center? It'll probably be easier to reach them Link to post Share on other sites
mcc-dano Posted May 19, 2009 Report Share Posted May 19, 2009 thanks guys. man i only got a black pantac paca. but ill need rbss, this vest is too bulky. yeah i guess looks swickish. damn mag pouches are 2 weeks delayed. titleist, did the rbss come with sewn-in soft armor? Just curious, where did you get the pouches from that are delayed that long? Link to post Share on other sites
SWE_Thompa Posted May 20, 2009 Report Share Posted May 20, 2009 If your right handed, why don't you move the radio to the other side and move those SAW pouches more to the center? It'll probably be easier to reach them thats a thought. Gonna give it a try. thx! Link to post Share on other sites
scooberoo Posted May 20, 2009 Report Share Posted May 20, 2009 Just curious, where did you get the pouches from that are delayed that long? Optactical. They had the cheapest, and I thought they had them in stock. 1-2 week delay. Link to post Share on other sites
zarda999 Posted May 20, 2009 Report Share Posted May 20, 2009 Hey Nor what is that square comm box in WC on your rig? Where can I get one and for how much? -Ryan Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.