Billy Bob the Sniper Posted January 26, 2009 Report Share Posted January 26, 2009 Nice. I really wish an airsoft company would come out with a more realistic looking C-Mag. Especially one with a clear back and simulated rounds seen through it. That would be bad *albatross*! Are you getting the Hero Arms Auto-Winding C-MAG? well that just gave me an idea... I have a dboys cmag laying around i might just try that. Link to post Share on other sites
Victory Posted January 26, 2009 Report Share Posted January 26, 2009 Nice. I really wish an airsoft company would come out with a more realistic looking C-Mag. Especially one with a clear back and simulated rounds seen through it. That would be bad *albatross*! Are you getting the Hero Arms Auto-Winding C-MAG? That is quite a bit easier than I thought it'd be. Thanks! As for the C-Mag, yes, I'll most likely go for the Hero Arms. From what I understand, it's the highest quality C-Mag available. -Vic Link to post Share on other sites
Billy Bob the Sniper Posted January 26, 2009 Report Share Posted January 26, 2009 yes they are, the dboys is prob at the bottom of the list... Link to post Share on other sites
uscmCorps Posted January 26, 2009 Report Share Posted January 26, 2009 Corps, can you find me a good one on RSOV? Making a bulk order from there soon.Here's the 12C one on RSOV. I use it. I know Magsz has strongly suggested that I shouldn't use it because of the discharge rate, but honestly, they've done fine by me and a lot of the guys on my team. http://rsov.com/index.php?target=products&...product_id=1758 And it'll fit a normal attached buffer tube? I accidentally to get a STAR MBK and the buffer tube is "screw-on" . Hmmm... you may be SOL, dude. Unless the back of the buffer tube is open like this one and the battery wires can come out the end. If the Star buffer tube is fully closed off... I'm not sure how you'd get the battery in there. I'm also not sure how much internal space there is in the STAR buffer tubes. On the plus side though, because the STAR buffer tube is a screw on type, if the inner diameter is large enough for the lipo to fit in, you could probably get more of the lipo in there than the rest of us can as we have that mounting/screw assembly getting in the way and chewing up real estate. Link to post Share on other sites
aznriptide859 Posted January 26, 2009 Report Share Posted January 26, 2009 Well I have a Dboys one actually - it can still screw on (held on by that small "screw" on the buffer tube), so I think I have space. Should I cut a notch on the underside of the buffer tube? Link to post Share on other sites
pforcerecon Posted January 26, 2009 Report Share Posted January 26, 2009 quick question and kind of off topic, but for those who want to order from WGC and not lose their trades, what was the US based company that would order from WGC and that way you can keep your trades in tact? I'm looking to get my perfect ar and instead of going straight to WGC, I'd like to be able to keep my trades. Link to post Share on other sites
PianoBlack Posted January 26, 2009 Report Share Posted January 26, 2009 I've owned both a CA and a Hero Arms Beta-C Mag and the Hero Arms magazine was the nicer of the two, if you want my opinion. I've yet to own any other make and model, but I was pleased by MAG's M249 soft magazine so if I end up getting another Beta-C, I may give them a shot. -Piano. Link to post Share on other sites
Victory Posted January 26, 2009 Report Share Posted January 26, 2009 (edited) quick question and kind of off topic, but for those who want to order from WGC and not lose their trades, what was the US based company that would order from WGC and that way you can keep your trades in tact? I'm looking to get my perfect ar and instead of going straight to WGC, I'd like to be able to keep my trades. http://www.airsoftadvantage.com/index.php Cheaper shipping this way, too. -Vic Edited January 26, 2009 by Victory Link to post Share on other sites
pforcerecon Posted January 26, 2009 Report Share Posted January 26, 2009 Thanks Vic..hopefully soon I'll be able to give a good contribution to this page, until then..onward with the AR variants! Link to post Share on other sites
Apache137 Posted January 26, 2009 Report Share Posted January 26, 2009 what are those grips people have around their magwells. Where can i find on? Link to post Share on other sites
Magsz Posted January 26, 2009 Report Share Posted January 26, 2009 Ive been using the 12C 1200mah lipo stick packs from RSOV for about six months now. They're ###### comparatively speaking but they do work. At the time when i recommended that Corps not use them i was genuinely concerned with the quality of the packs as lipo technology is nothing to joke around with. My testing has proven that they're fairly durable if not the greatest packs out there. Corps, are you running fets in any of your guns or just straight up 11.1 volt lipos? Link to post Share on other sites
uscmCorps Posted January 26, 2009 Report Share Posted January 26, 2009 Ive been using the 12C 1200mah lipo stick packs from RSOV for about six months now. They're ###### comparatively speaking but they do work. At the time when i recommended that Corps not use them i was genuinely concerned with the quality of the packs as lipo technology is nothing to joke around with. My testing has proven that they're fairly durable if not the greatest packs out there. Corps, are you running fets in any of your guns or just straight up 11.1 volt lipos? No fets. Though I probably should be. I've been shooting mostly semi-auto anyway. I just never got around to figuring out how to install fets. Link to post Share on other sites
aznriptide859 Posted January 26, 2009 Report Share Posted January 26, 2009 Corps may I suggest AWS MOSFETS? www.awsairsoft.com Great MOSFETS, huge selection, and they take up a relatively small space, though might not fit the buffer tube if you have a buffer tube lipo. Link to post Share on other sites
KNUDI Posted January 26, 2009 Report Share Posted January 26, 2009 Top one ICS Based Cranestock Aimpoint M2 replica on wilcox mount Empty PEQ 2 Box QD suppressor Middle (mine :-D ) Systema PTW Based Cranestock Aimpoint Comp M2 on Aimpoint Mount Empty PEQ 2 Box KAC RIS KAC Grip VTAC Sling Last one ICS Based Cranestock Aimpoint M2 replica on wilcox mount Freefloat RIS (don`t know manufacture) Link to post Share on other sites
aznriptide859 Posted January 26, 2009 Report Share Posted January 26, 2009 Now opting for a 14.5" carbine version: Just need to get a Phantom FH. Anyone know where to get Troy battle sights? Link to post Share on other sites
REVOA4 Posted January 27, 2009 Report Share Posted January 27, 2009 uscmCorps, that is a beautiful gun, great job! Link to post Share on other sites
bbondaloose Posted January 27, 2009 Report Share Posted January 27, 2009 Not too complicated, not too shabby. I like them. Link to post Share on other sites
Pradal-Serey Posted January 27, 2009 Report Share Posted January 27, 2009 Now opting for a 14.5" carbine version: Just need to get a Phantom FH. Anyone know where to get Troy battle sights? King arms makes good battle sight Link to post Share on other sites
bbondaloose Posted January 28, 2009 Report Share Posted January 28, 2009 KNUDI Loving the Trio of M4's all mounted with Aimpoints. Very good paintjob on the 2 ICS also Link to post Share on other sites
JPU Posted January 28, 2009 Report Share Posted January 28, 2009 Here is my rifle. Link to post Share on other sites
Renagade Posted January 28, 2009 Report Share Posted January 28, 2009 (edited) More photos can be seen in the Battle-Worn Picture thread. (Parts list upon request) Just need an Aimpoint T-1 now... Edited January 28, 2009 by Renagade Link to post Share on other sites
The Late Great Isamu Posted January 28, 2009 Report Share Posted January 28, 2009 Reaper, what rail system is that you have on this rifle? And what is the length? Link to post Share on other sites
Angry Posted January 28, 2009 Report Share Posted January 28, 2009 Got my Moe handguards today. Just need replacement screws for the rails, as was sent the wrong ones. Have a QD Tangodown DE shotrty replica(which matches the DE perfectly on the body) waiting to go on. Was considering building one just like that. Very nice! Link to post Share on other sites
tome Posted January 28, 2009 Report Share Posted January 28, 2009 Now opting for a 14.5" carbine version: Just need to get a Phantom FH. Anyone know where to get Troy battle sights? mmmm tasty rifle Boomarms stock troy sights with markings but they're about 50 usd each. Link to post Share on other sites
uscmCorps Posted January 28, 2009 Report Share Posted January 28, 2009 Corps may I suggest AWS MOSFETS? Are there any installation guides for those. I'm still not sure where I'd fit that Mosfet with my lipo in the buffer tube. :/ http://www.abload.de/image.php?img=cqbrssk1l2.jpg"]http://www.abload.de/img/cqbrssk1l2.jpg Looks great! A very simple but effective camo scheme. Love it. uscmCorps, that is a beautiful gun, great job! Hah! Thanks bro! Here is my rifle. The wear from usage on that gun is starting to really give it some character. Very nice. Link to post Share on other sites
Recommended Posts