pforcerecon Posted February 12, 2009 Report Share Posted February 12, 2009 Switch out the crane stock with a regular one Akapp and your golden =D Link to post Share on other sites
Victory Posted February 13, 2009 Report Share Posted February 13, 2009 (edited) My IAR in the CQ Configuration: Still need: Selector Switches MIAD Pistol Grip Still want: T-Pod DuoStock M82 Carry Handle King Arms M3 in Tan I'll probably buy those wants after I send it in for GBB conversion. With this setup, I'll either use hi-caps, or a Battleaxe dual M4 electric magazine. -Vic Edit: Also, yes, the magwell expander...everyone's favorite accessory. It stays with the CQ Config unless I go with Battleaxe mags. It will be removed with the standard IAR Config for use with C-Mags and the like. Edited February 13, 2009 by Victory Link to post Share on other sites
PynkPanthyr Posted February 13, 2009 Report Share Posted February 13, 2009 At first I was like, and then I was like Seriously that is mega awesome. Also MBUS? Link to post Share on other sites
Akapp Posted February 13, 2009 Report Share Posted February 13, 2009 Switch out the crane stock with a regular one Akapp and your golden =D totally read that just now... Thats what happens when i stay up late working on a paper and drink too much jager Link to post Share on other sites
cstrikeman Posted February 13, 2009 Report Share Posted February 13, 2009 Wanted to make my Defender a little different from the others out there..... and yes, those are nerf darts. Link to post Share on other sites
aznriptide859 Posted February 13, 2009 Report Share Posted February 13, 2009 (edited) EDIT: Double post, sorry. Edited February 13, 2009 by aznriptide859 Link to post Share on other sites
aznriptide859 Posted February 13, 2009 Report Share Posted February 13, 2009 Vic, where did you get the rear MBUS? I need one to compliment the front sight I got from PlasticMag Also, how tall is the aperture? I might just replace the rear sight with a BUIS. Link to post Share on other sites
Robinio Posted February 13, 2009 Report Share Posted February 13, 2009 @ pic request- http://i184.photobucket.com/albums/x138/ak.../_K114377-1.jpg http://i184.photobucket.com/albums/x138/ak.../_K114374-1.jpg Hope that helps! Thank you so much! Link to post Share on other sites
Pradal-Serey Posted February 13, 2009 Report Share Posted February 13, 2009 Anyone here who has tried the new airsoft surgeon fake gas block? Looks promising, but 50 bucks Anyway here's some of mine: Link to post Share on other sites
The Crunchy Bunny Posted February 13, 2009 Report Share Posted February 13, 2009 Nice IAR Vic, and awesome collection Serey Link to post Share on other sites
Magsz Posted February 13, 2009 Report Share Posted February 13, 2009 How is that an IAR? Because it has a tan receiver? Also, putting a 10 inch barrel onto an IAR kind of defeats the whole purpose of the weapon system. Reliability goes down and wear increases as you shorten the barrel and gas system whether its a piston or not. Thats just an AR with some doodads on it. Yes, im well aware that we cannot currently build an accurate IAR replica but im sure with enough thought and design a person could come up with something close. The project would probably end up being stupidly expensive though Link to post Share on other sites
Spartan452 Posted February 13, 2009 Report Share Posted February 13, 2009 How is that an IAR? Because it has a tan receiver? Also, putting a 10 inch barrel onto an IAR kind of defeats the whole purpose of the weapon system. Reliability goes down and wear increases as you shorten the barrel and gas system whether its a piston or not. Thats just an AR with some doodads on it. Yes, im well aware that we cannot currently build an accurate IAR replica but im sure with enough thought and design a person could come up with something close. The project would probably end up being stupidly expensive though Come on don't be too harsh, it looks semi-quasi close to the IAR... btw where did you get those MBUS???? Link to post Share on other sites
Victory Posted February 13, 2009 Report Share Posted February 13, 2009 (edited) Magsz, Better? Started to snow in SoCal...again. Had to snap a pic. Sorry about the trigger guard...it (and the wonky pistol grip angle) kinda' kills the pic, I know, but I can't find my roll pins. -Vic P.S. BTW, it is NOT a replica of the LWRC...it's similar to, but not a direct replica of their IAR. It's more or less my own creation (that, for the most part, is built with spare parts) that just happens to fit the role quite nicely...in my opinion, anyway. Edited February 13, 2009 by Victory Link to post Share on other sites
Althis Posted February 13, 2009 Report Share Posted February 13, 2009 where do u live in socal that's snowing? just raining a lot here in pasadena Link to post Share on other sites
Pradal-Serey Posted February 13, 2009 Report Share Posted February 13, 2009 btw where did you get those MBUS???? trip to china Link to post Share on other sites
tinydata Posted February 14, 2009 Report Share Posted February 14, 2009 I do love that LWRC lookalike! I got bored today and decided to make my XM177 more realistic. Anybody want to guess the brand? That's right! Its a cheapo DPMS spring XM177! I used paint and sandpaper to give it a more realistic finish. Better than my old CA M15A4, in fact. Link to post Share on other sites
Hispeed1 Posted February 14, 2009 Report Share Posted February 14, 2009 (edited) Update on SOPMOD M4 CQBR Block 2. (Still need to get a tan 553 and a regular length TD QD grip) Edited February 14, 2009 by Hispeed1 Link to post Share on other sites
Whan Posted February 14, 2009 Report Share Posted February 14, 2009 That looks fantastic! I wouldn't get the normal length if I were you. The shorty grip fits perfectly Link to post Share on other sites
cpilla Posted February 14, 2009 Report Share Posted February 14, 2009 I'm starting to like the side RIS mount bipod. Link to post Share on other sites
aznriptide859 Posted February 14, 2009 Report Share Posted February 14, 2009 Man, that DPMS brings back memories: 400fps springer ftw. Link to post Share on other sites
tinydata Posted February 14, 2009 Report Share Posted February 14, 2009 lol, 400 fps? What'd you do to it? Link to post Share on other sites
NeoVeNoM Posted February 14, 2009 Report Share Posted February 14, 2009 Current look of my Magpul PTS Link to post Share on other sites
Ascendance610 Posted February 14, 2009 Report Share Posted February 14, 2009 (edited) Current look of my Magpul PTS You should do the grip-tape mod to the pmag, it would help with your 2-tone look. an so this isn't spam. My 7" LaRue M4. Edited February 14, 2009 by Ascendance610 Link to post Share on other sites
Frakk2k Posted February 14, 2009 Report Share Posted February 14, 2009 Interesting half-tone Link to post Share on other sites
Althis Posted February 14, 2009 Report Share Posted February 14, 2009 Current look of my Magpul PTS i would ditch the PRI sight and get a knights type or a vltor folding Link to post Share on other sites
Recommended Posts