Misfit Posted January 11, 2009 Report Share Posted January 11, 2009 Continuation of http://www.arniesairsoft.co.uk/forums/inde...howtopic=133840 Link to post Share on other sites
Reincarnation... Posted January 12, 2009 Report Share Posted January 12, 2009 That's because you havent seen these yet: http://i273.photobucket.com/albums/jj235/c...42/IMG_2182.jpg I...must...make...replica... My first time seeing the "MAG-K" and it beautiful. Link to post Share on other sites
jviola Posted January 12, 2009 Report Share Posted January 12, 2009 Yea thats hot, but its a bit too tactical for my taste Link to post Share on other sites
Akapp Posted January 12, 2009 Report Share Posted January 12, 2009 Looks too gucci to me. Link to post Share on other sites
Reborn Posted January 12, 2009 Report Share Posted January 12, 2009 I have a few questions about expanding my desert kit. I thought that I'd ask them here, as they are relevant. I currently own an HSGI Wasatch plate carrier (one of the newer ones that ships with bungee cord retainers instead of the more traditional Velcro flaps). I want to add some replica plates as well as a MOLLE hydration carrier. My 'Satch is a regular-sized one, see below: Would a pair of medium SAPI plates fit my carrier? Also, I have my eyes on the "Pantac compact MOLLE hydration carrier" as advertised on Redwolf. The website won't work for me right now, but it's the one with MOLLE backing on only the upper half. Would it fit the back of my carrier? Finally, does it come with a bladder included? Thanks for the info. Now for some pictures. My tool table. Both of my loadouts (woodland and desert) are there. My workhorse rifle for the moment. I've also acquired a G36C recently. Link to post Share on other sites
evansy Posted January 12, 2009 Report Share Posted January 12, 2009 I have a few questions about expanding my desert kit. I thought that I'd ask them here, as they are relevant. I currently own an HSGI Wasatch plate carrier (one of the newer ones that ships with bungee cord retainers instead of the more traditional Velcro flaps). I want to add some replica plates as well as a MOLLE hydration carrier. My 'Satch is a regular-sized one, see below: http://img249.imageshack.us/img249/8123/wa...overviewjf0.jpg http://img249.imageshack.us/img249/6200/wa...ackpanelsj4.jpg Would a pair of medium SAPI plates fit my carrier? Also, I have my eyes on the "Pantac compact MOLLE hydration carrier" as advertised on Redwolf. The website won't work for me right now, but it's the one with MOLLE backing on only the upper half. Would it fit the back of my carrier? Finally, does it come with a bladder included? Thanks for the info. Now for some pictures. My tool table. Both of my loadouts (woodland and desert) are there. http://img510.imageshack.us/img510/8509/eq...overviewit6.jpg My workhorse rifle for the moment. I've also acquired a G36C recently. http://img371.imageshack.us/img371/7867/m733nj0.jpg Must resist the 'satch If its this hydo pouch then it'll go on no trouble but it may swing around a bit at the bottom but its nothing that some cable ties or malice clips (if you want to be gucci) added to the bottom and looped thru the strap on the vest wont sort out. All pantac hydro pouches come with bladders too and there pretty decent. Not camelbak standard but good enough to do the job. I've got a set of replica medium sapi plates and they measure 9.5"x12" with the angled bit 9" from the bottom and the narrow top is 5" wide. Personally I'm not a fan of the plastic plates as there curved and I find they dig into my chest unless I either wear soft armour (too hot) or have front of the plate carrier right up at the top of my ribcage. I made some plates out of 10mm foam for my MBSS which give it enough structure so it doesnt sag and it doesnt dig in as much as with the plastic plates. Link to post Share on other sites
Pkekyo-Nor Posted January 12, 2009 Report Share Posted January 12, 2009 I'm running this one in OD on my Wasatch myself, and it works brilliantly, I'd much prefer it over the one with fasteners running only half the way down... But if you really need shoulder straps for some reason, that's a whole different ballgame... Link to post Share on other sites
Reborn Posted January 12, 2009 Report Share Posted January 12, 2009 Thanks for the help guys. I like the one Pkekyo recommended. However, as you can see from the picture, the back panel of my 'Satch has no webbings on the lower half. Would this affect the security of the hydration carrier? Link to post Share on other sites
Pkekyo-Nor Posted January 12, 2009 Report Share Posted January 12, 2009 That's as far as the PALS webbing on my Wasatch goes as well. I attached it with the fasteners running between the waist-strap and the plate carrier itself, keeps it very secure, despite there being a few inches where there's no webbing; as long as you secure it to the waist-strap at the bottom of the carrier, you should be fine. Link to post Share on other sites
Mr Foxhound Posted January 12, 2009 Report Share Posted January 12, 2009 Could attach the hydro pouch with GRIMLOCs as well, Reborn Link to post Share on other sites
Pkekyo-Nor Posted January 12, 2009 Report Share Posted January 12, 2009 Well, of course... But that'd be a highly redundant solution, to say the least. Here's how I've done it, and there's -no- travel in it at all: (sorry for nicking your photo..simplicity) - the red lines indicate where the MOLLE fastener on the hydration carrier goes. (The fasteners are of course weaved into the webbing of the hydration carrier's backing for that extra security, but I'm not entirely sure that's even needed) /EDIT: didn't see you had asked another question in your original post; the hydration carrier I linked earlier does come with the bladder fitted, and also a tube sleeve. Works great if you remember to empty it out and dry it up after use Link to post Share on other sites
Reborn Posted January 13, 2009 Report Share Posted January 13, 2009 Got it. Extra thanks for the visual demonstration And yes, I cannot emphasize more the importance of emptying, cleaning, and drying hydration bladders after use. Link to post Share on other sites
Mr Foxhound Posted January 13, 2009 Report Share Posted January 13, 2009 Whats the best way to clean them without a cleaning kit? I just got my first one. lol Awsome 'stach btw. Link to post Share on other sites
Reborn Posted January 13, 2009 Report Share Posted January 13, 2009 Empty out the water (duh), use multiple sheets of absorbent paper towel to wipe the interior as clean as you can. Once that's done, stuff balled-up sheets of paper towel inside (particularly at the corners) and leave the unit out to air-dry. After 24 hours, dispose the somewhat damp sheets inside, wipe it one last time, and store it away. Pay special attention to the nozzle - soak it in rubbing alcohol if necessary, for the human mouth is packed with bacteria. However, if you use the unit frequently enough (as in once every week), just fill it up with tap water and leave it somewhere dark and cool. Change the water inside twice and clean the nozzle normally. The chlorine present in tap water is an excellent disinfectant. I have done both and they work equally well. EDIT: More pictures of my 'Satch. I'm still using it in its most basic format. In the near future (as in when my next paycheck comes), I plan on the following expansions: - Pantac 2L hydration carrier mounted to the back panel - 2 Pantac dual fragmentation grenade pouches mounted to the front panel, right in front of the integral magazine pouches - 2 replica SAPI plates And of course, I'll be buying four replica hand grenades and two replica smoke grenades to fill out the four new grenade pouches and the two side pouches, respectively. Each grenade also double as a loose round container, enabling me to carry thousands of rounds. My duty belt has an HSGI triple pistol mag pouch on the right and a drop-thigh holster (OD at the moment, will be sprayed black soon) on the left. HSGI inside Evidently, my desert PMC loadout is that of a heavy infantryman. If I need to pull DM duties, I'd use the much slimmer Eagle chest rig with no armor underneath. Link to post Share on other sites
Agent47 Posted January 13, 2009 Report Share Posted January 13, 2009 what I want to know is the name of the flashlight mount on the AK: Link to post Share on other sites
Reincarnation... Posted January 13, 2009 Report Share Posted January 13, 2009 what I want to know is the name of the flashlight mount on the AK: http://i273.photobucket.com/albums/jj235/c...42/100_0651.jpg Looks like Surefire G2 Nitrolon in black mounted with a simple offset light mount, maybe a KZ Offset Flashlight Mount. Link to post Share on other sites
Azulsky Posted January 13, 2009 Report Share Posted January 13, 2009 Has the weesatch given you trouble with holding the mags in. I was worried this would happen with the new models due to airsoft magazine size differences. The lack of webbing on the bottom of the back is interesting, im sure that if anyone wanted to get one direct they could add it on. Link to post Share on other sites
Pkekyo-Nor Posted January 13, 2009 Report Share Posted January 13, 2009 Azulsky: I've run my 'satch with frankly an arseload of different mags, and have had -no- problems at all, never even came close to losing a single one. The lack of webbing on the bottom is to allow for adjusting the height of the rear plate by moving the waist-fastener up or down. Reborn has it in the lowest setting as of now, but as you see there is another set of wide vertical webbing which would allow for it to slide through, which is the way I'm running mine as of now. PALS webbing there could very well interfere with that ability, but no doubt HSGI would be willing to add some for you if you were dead-determined to do so Link to post Share on other sites
Agent Hunk Posted January 13, 2009 Report Share Posted January 13, 2009 Whats the best way to clean them without a cleaning kit? I just got my first one. lol Awsome 'stach btw. I just toss mine in the freezer between games after I empty it out. Link to post Share on other sites
FallenGuard Posted January 13, 2009 Report Share Posted January 13, 2009 I just toss mine in the freezer between games after I empty it out. I did that with a PANTAC Replica.... and it leaked all over the Place during the Game the next day. (As it was a very hot day, I had a cool back tough....) Link to post Share on other sites
Chimpy Posted January 13, 2009 Report Share Posted January 13, 2009 If you froze it whilst full you need to remember that ice expands as it freezes so you need to leave room for it to do so. If you froze it empty then there are probably other factors in the construction that sucked. Link to post Share on other sites
pjones Posted January 13, 2009 Report Share Posted January 13, 2009 Whats the best way to clean them without a cleaning kit? I just got my first one. lol Awsome 'stach btw. What I do is I drain as much water as possible then take a coat-hanger and stretch it out into an elongated diamond shape with the hook at one of the two long ends of the "diamond." I then put this in the open cap of the bladder and hang it up to dry. It's the same concept as the Camelbak drying racks but far, far cheaper. Link to post Share on other sites
Reborn Posted January 13, 2009 Report Share Posted January 13, 2009 Has the weesatch given you trouble with holding the mags in. I was worried this would happen with the new models due to airsoft magazine size differences. The lack of webbing on the bottom of the back is interesting, im sure that if anyone wanted to get one direct they could add it on. No. The bungee cord retainers are highly flexible. And since you have to tie them yourself, you can customize their height to suit your choice of magazines. Link to post Share on other sites
evansy Posted January 13, 2009 Report Share Posted January 13, 2009 Whats the best way to clean them without a cleaning kit? I just got my first one. lol Awsome 'stach btw. If you do forget to empty and dry it sterelising tablets for babys bottles work a treat and are cheap as chips. Link to post Share on other sites
aznsk8s87 Posted January 13, 2009 Report Share Posted January 13, 2009 To clean out a camelbak? I just use baking soda and water. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.