Wingmann Posted March 20, 2012 Report Share Posted March 20, 2012 Not the DragonRed one, Correct. It's the one that comes and goes on Ebairsoft, at a much affordable price. It didn't come in a box, so I'm not sure it's the Emerson one, but it could very well be. Quote Link to post Share on other sites
_Karma_ Posted March 20, 2012 Report Share Posted March 20, 2012 They only have V Lite's at the moment. I haven't seen the manta's  They keep pulling it off the site. It's there sometimes. I got one from them but noticed after I had ordered that they were taken off the site. I've seen them on there since though. Just keep checking back. Maybe it's a supply thing. Quote Link to post Share on other sites
Nasty_TheYankWelshOne Posted March 20, 2012 Report Share Posted March 20, 2012 RSOV still has them up, IIRC. Quote Link to post Share on other sites
_Karma_ Posted March 21, 2012 Report Share Posted March 21, 2012 (edited) Almost done....  This started out as the TMC Airframe but slowly I've been making some changes. I like this helmet a lot and it's different from all the FAST helmets out there now. Although I do have a FAST ballistic replica which I love too.       TMC Airframe shell Oregon Aero pads Crye ARC rails Crye mesh cover MPLS Wilcox G24 Norotos Dual Dovetail D300 Gen2HP Manta replica VAS replica  On the way: Ops-Core VAS OPS-Core H-Nape Edited March 21, 2012 by _Karma_ Quote Link to post Share on other sites
akiraspeedstar Posted March 21, 2012 Report Share Posted March 21, 2012 (edited) Haha, I colored in the eyeballs, a goatee, eyebrows, etc. on my helmet head but your stand tops it haha Edited March 21, 2012 by akiraspeedstar Quote Link to post Share on other sites
Agent Hunk Posted March 22, 2012 Report Share Posted March 22, 2012 (edited) I am still working on the NV gadgets. Protec Alpha Half Shell Ops-Core X-Harness (modified helmet to fit it) MPLS Ops-Core VAS Shroud USGI Rhino arm USGI J-arm Sightowl ANVS Edited March 22, 2012 by Agent Hunk Quote Link to post Share on other sites
RIOT1980 Posted March 22, 2012 Report Share Posted March 22, 2012 My Protec  Quote Link to post Share on other sites
Lone_Bullet Posted March 25, 2012 Report Share Posted March 25, 2012 Guys, quick Q here, do you know what helmet the SOD helmetcover is intended for? I'd love some Pencott camo for a Ops Core FAST Base Jump. Thanks! Quote Link to post Share on other sites
skyler8158 Posted March 25, 2012 Report Share Posted March 25, 2012 Â Â Mine is on the left. Waiting on team wendy pads and I have to mount my MS2000 and bungies. I taped down the power cord after the picture was snapped. Quote Link to post Share on other sites
_Karma_ Posted March 25, 2012 Report Share Posted March 25, 2012 Interesting NODs. Can you tell us more? Quote Link to post Share on other sites
skyler8158 Posted March 25, 2012 Report Share Posted March 25, 2012 Here's a PM I just sent about them, they are are modified PVS-5Cs. Â "My teammate (guy on the right) is the one who did it. He would have to give you the real scoop on it, but here is the gist of it: Â - PVS-5Cs, can't be the A model, needs the Wilcox PVS-7/14 style objective lens. Stripe away everything but the tubes/lenses assemblies - ANVIS LPBP, has to be rewired completely (turns out there is a circuit board inside, not as easy as he thought it was gonna be) - N-Vision dual PVS-14 adapter, tube/lens assemblies slip right in. - LEMO connector to match the LPBP one, solder power downleads from the tubes to it. " Quote Link to post Share on other sites
_Karma_ Posted March 27, 2012 Report Share Posted March 27, 2012 That's pretty ingenious. Quote Link to post Share on other sites
Touchette Posted March 27, 2012 Report Share Posted March 27, 2012 How effective are they as actual NODs? Quote Link to post Share on other sites
Banshee_Will Posted March 27, 2012 Report Share Posted March 27, 2012 (edited) Now with "realstic battle damage". The scar is from a sniper pellet........ (I think) I only noticed at the end of the weekend, when I wore the helmet for about 15 hours straight. Â Â I'm going to re spray as I don't like the emerson factory finish but I need some more khaki/tan krylon. Â EDIT: Changed the grammer and sentance structure as it was confusing. Edited March 27, 2012 by Banshee_Will Quote Link to post Share on other sites
skyler8158 Posted March 27, 2012 Report Share Posted March 27, 2012 How effective are they as actual NODs? Â Very good, the PVS5s we got were sitting in storage for the past two decades so their tubes are all in fantastic shape. For comparison, those Sightowl gen 2 monoculars use PVS5 tubes but with lots of hours on them and iffy commercial non-milspec lenses. I've owned a Sightowl Gen 2, ITT PVS-14, and this set up. The Gen 3 ITT was obviously the clearest image/best amplification, but for airsoft this custom set up is more than ideal. Quote Link to post Share on other sites
Yoggi Posted March 27, 2012 Report Share Posted March 27, 2012 Â Â MSA TC SOGH OPS-Core H-Nape Norotos NVG Mount MS2000 JGK MS2000 mount* Contour Mount. Quote Link to post Share on other sites
frogfish Posted March 28, 2012 Report Share Posted March 28, 2012 My new repro 2001.... some IR us flag patches, and a Ferro counterweight bag   Quote Link to post Share on other sites
Stress Posted March 28, 2012 Report Share Posted March 28, 2012 Â mich2000* /w custom paintjob & norotos mount* surefire hl1 flashlight* googles straps ms2000 strobe* Velcro Safety Lite ( Class A ) IR patches* ----------------------------------------------------------------------------------------------------- Â Â mich2000* /w custom paintjob (under the hood) & ACU helmet cover locust googles MPLS* cat-eyes band IR patch and waiting for the nvg mount ----------------------------------------------------------------------------------------------------- Â Â FAST CARBON HELMET* w/ Rhino Mount* & Side Railway DE custom paintjob Headset and Helmet Rail Adapter Set /w comtac II headsets Rhino NV metal arms mount / Green Red & Green Velcro Safety Lite ( Class A ) US flag pouch ms2000 strobe* elastic straps and waiting for the multicam helmet cover and manta strobe ----------------------------------------------------------------------------------------------------- Â Â IBH* /w rails & NVG mount custom paintjob 2x US military flag ACU ms2000 strobe* SureFire* light VER II pvs15* /w battery pack* and custom paintjob IR Velcro Safety Lite ----------------------------------------------------------------------------------------------------- Â *replicas Quote Link to post Share on other sites
slu Posted March 28, 2012 Report Share Posted March 28, 2012 (edited) I just need rail adapter for Sordins  Where would one find rail adapters for Sordins?  I purchased the DragonRed ballistic and it would be quite nice. Edited March 28, 2012 by slu Quote Link to post Share on other sites
Section 8 Posted March 29, 2012 Report Share Posted March 29, 2012 There was a post somewhere on the forums a while back where someone modified the Comtac adapters to fit the Sordins... I forget what they did exactly, but it involved enlarging the part of the adapters that snapped onto the headset. Quote Link to post Share on other sites
Wingmann Posted March 29, 2012 Report Share Posted March 29, 2012 Where would one find rail adapters for Sordins? As far as I know, there are not commercial options, just handmade. Quote Link to post Share on other sites
TheEgo Posted March 29, 2012 Report Share Posted March 29, 2012 I just need rail adapter for Sordins  Like THESE  scroll down a few posts, about 3 replies on how I did the mod. Me and 2 team mates have got a 36hr event coming up this weekend to test their durability Quote Link to post Share on other sites
RIOT1980 Posted March 30, 2012 Report Share Posted March 30, 2012 (edited) MICH2001 repro for 3col SEAL leadout  missing is COMTAC II repro  FAST Ballistic repro for AOR1 SEAL leadout  missing COMTAC II repro with rail adapter Edited March 30, 2012 by RIOT1980 Quote Link to post Share on other sites
charlie 6 Posted March 31, 2012 Report Share Posted March 31, 2012 (edited)  My SEAL-ish Lid. Pls excuse the Rhino arm, it was a freebie and I guess it'll stay on until I can get a TATM MICH2K USGI Goggle Retainers 3hole Norotos with Rhino arm Bolle X800 Skydex 3/4" Pads  Im still waiting for a Ops Core H Nape and some IR Tabs/Flags. Also debating whether or not to get bungee's for this Edited March 31, 2012 by charlie 6 Quote Link to post Share on other sites
judgeman Posted April 1, 2012 Report Share Posted April 1, 2012 Work in progress repro lid. Needs more...goodies. Â Â Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.